user_3566090028

ThreeD-Michael

<figure class="table" style="width:50%;"><table><tbody><tr><td>News 2024-04-10:Please also check out my new <a target="_blank" href="https://makerworld.com/en/models/422861" rel="nofollow noopener">Blade Dispenser</a> for this Bed Scraper:<figure class="image"><a href="https://makerworld.com/en/models/422861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/843986/2024-04-10_3fff13c94089c.png"></a></figure></td></tr></tbody></table></figure>This is the XL version of my popular <a target="_blank" href="https://makerworld.com/en/models/231936" rel="nofollow noopener">Optimized Bed Scraper</a> with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer!&nbsp;Each blade weighs just 1.8 grams - and since each blade has two cutting edges, only 0.9 grams of filament is required per cutting edge. It couldn&#39;t be more economical, and you can now replace the blades more often without feeling guilty.&nbsp;Print Settings:This design has been optimized for printing with a layer height of 0.2 mm, so please do not use a different value. The first layer should have a line width of at least 0.5 mm. In order to get the sharpest possible blade, you should choose a smooth printing surface if possible.The locking mechanism has been optimized for PLA, so I recommend this filament for the handle. You can also print the blades with PLA - as long as you don&#39;t scratch on a bed that&#39;s too hot for PLA. In this case, I would recommend a more heat-resistant filament, for example PETG.&nbsp;Assembly:That is very easy. Simply slide the blade into the handle. But be careful - the blades are sharp, so don&#39;t push them in with your finger, but insert them loosely and then push them all the way by pressing the blade on a solid surface.

Optimized Bed Scraper XL

A1 mini upgrades

Wing-Art

IMPORTANT NOTE - For a perfect Slinky print:&nbsp;Please note that not every filament is equally suitable for the Slinky. I have had the best experiences with Silk-PLA. Therefore, I recommend printing the test piece after calibrating the filament to ensure that the layers separate properly.<ul><li>clean the print bed with dish soap, use a glue stick if needed, and calibrate the filament.  <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate" rel="nofollow noopener">CLICK HERE </a>for more information!   </li><li>There's a test print in the print profile; please print it if you have any doubts.</li></ul>Discover the fun and soothing effect of your self-printed Slinky! This 3D printing file allows you to create your own Slinky toy comfortably at home. The Slinky will definitely excite the kids. It's an ideal toy that promotes creativity and fine motor skills!&nbsp;After Printing:  On your Slinky, you will find special grooves. These indicate precisely where you need to cut. Use a sharp knife or a spatula to gently separate the Slinky along these grooves (see picture). Important Notes on Slicing:  If a message appears during slicing to realign the object or to turn on support generation, ignore this message. The support generation must remain off to maintain the correct design of the Slinky. Is the 100mm Slinky too small for you? <a target="_blank" href="https://makerworld.com/en/u/3001046203" rel="nofollow noopener">HERE you can find the Slinky XL with an impressive size of 200mm!</a>&nbsp;Enjoy your self-printed Slinky!  <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=wpBg2f7UgTo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/wpBg2f7UgTo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>___  Wichtiger Hinweis - Für einen perfekten Slinky-Druck: &nbsp;Beachte bitte, dass nicht jedes Filament gleichermaßen für den Slinky geeignet ist. Meine besten Erfahrungen habe ich mit Silk-PLA gemacht. Daher empfehle ich, nach der Kalibrierung des Filaments zunächst das Teststück zu drucken, um sicherzustellen, dass sich die Schichten ordnungsgemäß lösen lassen.<ul><li>Reinige die Druckplatte mit Spülmittel, nutze bei Bedarf einen Klebestift und kalibriere das Filament.  <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/calibration_flow_rate" rel="nofollow noopener">KLICKE HIER </a>für mehr Infos!   </li><li>Im Druckprofil ist ein Testdruck vorhanden; bitte drucke ihn bei Unsicherheiten.</li></ul> Entdecke den Spaß und die beruhigende Wirkung mit deinem selbstgedruckten Slinky! Diese 3D-Druckdatei ermöglicht es dir, dein eigenes Slinky-Spielzeug bequem zu Hause zu erstellen. Der Slinky wird definitiv bei den Kindern für Begeisterung sorgen. Ein ideales Spielzeug, das Kreativität und Feinmotorik fördert!&nbsp;Nach dem Druck: An deinem Slinky findest du spezielle Rillen. Diese geben genau an, wo du schneiden musst. Verwende ein scharfes Messer oder eine Spachtel, um den Slinky entlang dieser Rillen behutsam aufzutrennen (siehe Bild).&nbsp;Wichtiger Hinweise beim Slicen: Wenn beim Slicen die Meldung erscheint, das Objekt neu auszurichten oder die Stützengenerierung einzuschalten, ignoriere diese Meldung. Die Stützengenerierung muss ausgeschaltet bleiben, um das Design des Slinky korrekt zu erhalten.&nbsp;Der Slinky ist dir mit 100 mm zu klein? <a target="_blank" href="https://makerworld.com/en/models/193043#profileId-213428" rel="nofollow noopener">HIER findest du den Slinky XL mit beeindruckenden 200 mm!</a>&nbsp;Viel Vergnügen mit deinem selbstgedruckten Slinky!

Slinky - Fidget Toy

Random

3dprintingisneat

60x60x125mm storage cup for honeycomb storage walls. Light weight model 50g of filament with 2 walls at 0.20 height. supports at an angle of 10 (in bambu studio) will only do them for the honeycomb inserts to put it onto the wall.

A1 mini upgrades

Random

Storage