BanderRod

Chase868

Printable replacement filament cutter blades for X1 and P1 Bambu Labs printers. Use #4 hobby blades, I used these from Amazon (https://www.amazon.com/TIHOOD-100PCS-Replacement-Hobby-Blades/dp/B07QP8L1QG). The blades need to be snapped to ~12mm in length. I created a small printable jig to allow easily snapping them to the correct length with the help of a pair of pliers. Please provide feedback if you give this a try. I am only one person with one machine, but I have tested with 1000+ filament changes and encountered no issues. All feedback is welcome. Print Settings:<ul><li>I recommend printing out of a material such as PETG, ABS, or ASA. I used ASA. PLA may work but I have not tested it so try at your own risk. </li><li>0.12mm layer height highly recommended as it makes supports unneeded. </li><li>Use Arachne wall generation to ensure dimensions are preserved, I had issues when printing with classic wall generation. </li><li>3 walls, 100% infill. </li><li>Brim may be needed due to small contact area with the build plate. </li></ul>Post Printing:<ul><li>If you used a brim ensure to trim any access so the cutter will properly fit. </li><li>Once you have your blades cut to length they can be inserted and secured using your glue of choice or by heat insetting. I found Gorilla brand super glue was effective. </li><li>Insert into cutter arm as normal ensuring it actuates smoothly. If it does not you may need to lightly sand the print. </li></ul>I have attached STL and STEP files as well as my ASA Bambu Studio project.

X1/P1 Replacement Filament Cutters

Printer Updates

K-Studio.ca

A tool to hold microfiber towel to clean build plates with ease.<ul><li>Print in PLA</li></ul><h4>Filament used in photo:</h4><ul><li>Bambu PLA Metal</li><li>Bambu PLA Matte</li></ul><h4>Updates </h4>March 23, 2024<ul><li>Added an alternative knob for thin cloth or sandpaper.</li><li>Original is designed to bottom out to prevent vertical force to break the print apart.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/754191/2024-03-23_13ab91d9f5c498.jpg"></figure><h4>Instruction</h4><ol><li>Simply take the two blocks align to the microfiber and cut to the same rectangle size.</li><li>Wrap the microfiber around the edge and crimp it down.</li></ol><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/754191/2024-03-23_6dbc3edb91bb7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/754191/2024-03-21_757e6c3f7297d8.gif"></figure>

Build Plate Cleaner

Tools and staff

2D Art

World Modern Wall Art&nbsp;I would really appreciate it if you could rate my Designs! :)&nbsp;Follow for Daily Professional and Free 2D Designs!&nbsp;For Commercial License and exclusive Designs: <a target="_blank" href="https://www.patreon.com/2darts" rel="nofollow noopener">https://www.patreon.com/2darts</a>