user_3532562627

火宅

一种可以伸缩折叠的凳子，折叠后为一个圆柱体，把盖章向上拉起并向右转动，即可完成固定，建议使用PETG打印，可以有效提高强度和使用寿命。A kind of stool that can be retracted and folded, folded into a cylinder, pull the stamp up and turn it to the right, you can complete the fixation, it is recommended to use PETG printing, which can effectively improve the strength and service life.

伸缩凳Telescopic stool

Useful 

dfreshkremer

PLEASE READ ENTIRE DESCRIPTION BEFORE PRINTING (there&#39;s a short assembly/instructional video at the end)&nbsp;WARNING!!!: Let&#39;s get the most important thing out of the way first. The Print Profile provided requires an AMS for the One-Piece Lid ONLY. The One-Piece Lid is the only part that requires supports. I printed everything in PETG, and used PLA as a support interface for the lid. You CAN print this lid without the PLA interface, but if you do, you&#39;ll need to download the files and print using your own support settings. If you try to use the Print Profile (for the one-piece lid), and do not use the PETG/PLA combo, the supports will be impossible to get off.&nbsp;The Sandy Safe is meant to be buried in the sand, keeping the lid uncovered so you can open/close it. Once buried, you can hide the Sandy Safe under your towel, and store your valuables in it. It is roughly 10&#34; tall and can easily hold 2-3 phones plus a wallet, keys, and more. You can print an optional TPU gasket to attach to the main body for added water/sand protection.  This is not included in the Print profile, but can be downloaded as an STL&nbsp;&nbsp;If you&#39;d like Selling-Rights, or a merchant license agreement, or just want to “buy me a coffee,” please message me for details!&nbsp;There are two Lid Options<ol><li>Two-Piece Lid: This lid prints in two pieces, and requires glue and assembly. No supports needed.</li><li>One-Piece Lid: This prints as one piece, and requires supports. It&#39;s a little deeper and has a “carrying handle” built in.</li></ol>&nbsp;Pics of the Two-Piece Lid…<figure class="image image_resized" style="width: 53.37%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_ef86300f899dc8.jpg"></figure><figure class="image image_resized" style="width: 52.93%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_339a4d9666a038.jpg"></figure>&nbsp;Pics of the One-Piece Lid…<figure class="image image_resized" style="width: 52.85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_ee1ea804fd7458.jpg"></figure><figure class="image image_resized" style="width: 52.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_c7a9311da35b68.jpg"></figure>&nbsp;The square hole in the lid handle is for an optional flag you can print. If you&#39;d rather not hide the Sandy Safe under your towel, you can burry it and use the flag as a marker…<figure class="image image_resized" style="width: 52.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000490385/design/2024-06-09_a7a503c59c1788.jpg"></figure>&nbsp;Here is a short assembly instruction video. If you have any questions regarding the model or the print settings, please message me or leave a comment. If you do print it, make sure to share some pics of it when finished, and give me some feedback! Thanks!&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=XtSNDPNWEdI"></oembed></figure>&nbsp;<a target="_blank" href="https://www.youtube.com/watch?v=XtSNDPNWEdI" rel="nofollow noopener">Sandy Safe Assembly Instructions (youtube.com)</a>&nbsp;&nbsp;&nbsp;&nbsp;

The Sandy Safe (Beach Vault)

Containers 

LeeBob

Introducing our universal 3D printable D6 dice – a versatile and convenient addition to your gaming collection. These six-sided dice are designed for ease of printing and universal use, featuring numbers instead of traditional dots, making them perfect for a wide range of board games and tabletop games.&nbsp;Key Features:&nbsp;Single Color Design: These dice are designed to be printed in a single color, eliminating the need for multi-material 3D printers or AMS (Automatic Material System). This makes them accessible to anyone with a basic 3D printer.&nbsp;Numbered Faces: Each face of the die is clearly numbered from 1 to 6, providing a modern twist on the traditional D6 design. The numbers are easy to read and ensure clear results during gameplay.&nbsp;16 mm Standard Size: The dice adhere to a 16 mm standard size, ensuring compatibility with most games that require a six-sided die. Each die is carefully calibrated to ensure balanced rolls and fair play.&nbsp;Easy Printing: The design ensures a smooth and hassle-free printing process. The dice are optimized for minimal support and quick print times, making them an ideal project for both beginners and experienced 3D printing enthusiasts.&nbsp;Add these universal 3D printable D6 dice to your collection today and enjoy the convenience of easy, single-color printing without the need for specialized equipment. Perfect for game nights, DIY projects, and as gifts for fellow gamers!

Universal 3D Printable D6 Dice

Games & Dice

La Calavera

Ready and Painted for Multicolor printers !!! Print in Place no Supports Required&nbsp;Lumi Cute Ghost / Print in Place // La Calavera licensed toyLumi Cute Ghost the name and distinctive likenesses are trademarks of La Calavera.&nbsp;It works on Filament &amp; Resin. / Can be scaled up&nbsp;Don&#39;t add extra supports to the files, they are not needed and it will cause troubles.&nbsp;This Design is protected by copyright Law. When you purchase, you do not have the right to sell any digital file or 3D printed toy without any consent, you can obtain commercial license to sell Physical Prints From The below link&nbsp;Support Me: <a target="_blank" href="http://www.patreon.com/la_calavera_3dprint" rel="nofollow noopener">www.patreon.com/la_calavera_3dprint</a>&nbsp;Subscribing in Patreon and you&#39;ll get permission to use the Pictures and Music we share in your Social Media and Etsy StoresAlong with the STL files you&#39;ll find the 3MF files for multicolor, the toy is already painted and ready to be printedYou can play a lot with the settings, the files have a very good grasp on the bed, it can be printed at high speeds, we tested it at 70 mm/s but printers like Bambu will be able to print it fasterFeel free to share your makes on this page, i would love to see them or you can tag me on my socials here :&nbsp;Instagram - <a target="_blank" href="https://www.instagram.com/la.calavera.3d.print/" rel="nofollow noopener">https://www.instagram.com/la.calavera.3d.print/</a><h2>3D PRINTING SETTINGS</h2>3D PRINTING SETTINGSPrimary Layer Height = 0,1600 (mm)Top Solid Layers= 9Outline/Perimeter Shells= 2 / 3Temperature= 215 C / 205 (it&#39;s up to you)Default Printing Speed= 70,0 mm/sInfill Percentage= 12% (or more, it&#39;s up to you)

Lumi Cute Ghost / Print in Place

Random Toys

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon.</h3>&nbsp;<h3>I am here to introduce you, retractable dragon wand! I made this design for Makerworld dragon contest (3/5). I think it will be a great addition Ornaments and toy for kids for new Dragon year. </h3>&nbsp;<h3>Best wishes to you all! 新年快乐.</h3>&nbsp;This wand takes me a while to design and tests. It takes around 2h33m to print and cost right around 50g filaments.The retractable part is not super rigid, it's by design, I did not put a lot of parameter in there, consider this will most gives to kids to play. So rather it break than hurt somebody.&nbsp;<h2>Update:</h2><h3>v1.5 (1/13/24) - Fix internal parts geometeric issue. (tested) It only applys on P & X Series profile.</h3>Printing profile for P & X Series have found geometric issues on inner parts. Which only occurs when selecting P&X series printers, A1 and A1mini profile doesn't have this issue. Internal parts have been redo. Profile for a1 mini, A1 have remained as v1.4 since it is working correctly.&nbsp;&nbsp;<h2>Detail display:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_161fe41bfd6c.gif"></figure>&nbsp;&nbsp;<h3>My other wand design: </h3>Loong Wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-16_55943d4f3e579.jpg"></figure>&nbsp;Harry Potter Wand: <a target="_blank" href="https://makerworld.com/en/models/68778#profileId-72937" rel="nofollow noopener">https://makerworld.com/en/models/68778#profileId-72937</a> <figure class="image image_resized" style="width:69.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_db6b2ce5b060b.jpg"></figure>&nbsp;<h2>Instruction:</h2>I put very large size of brim on all my printing profile, with 0mm gap to ensure the printing success rate. Since this model is a bit challenge to print.You will required to do some post work of removing brim off. It should be very simple. I have increased gap on first layer from design, so it is tight tolerance, but not super tight.&nbsp;&nbsp;<h2>Materials:</h2>If you are printing with some high shrinkage rate filaments, like some of the silk filament. Due to the sinkage rate different. Your part might slide out or break very easily. So, use some good filaments.&nbsp;<h2>Design:</h2>Let's talk about a little bit of design. The retractable mechanism is very simple, the inner piece is interlocking with outter pieces.<figure class="image image_resized" style="width:24.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_651c54592313e.png"></figure>Style is more challenging<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_37b064643dfb6.png"></figure>Adding more details.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413415/2024-01-11_d16c3620c7aab.png"></figure><h2>Printing suggestions:</h2>This is a tall object with very small contact area on first layer. It is challenge to print. It will print without brims, but it fail very easily that way. If you are slicing the model yourself, make sure you add brims, and set brim gap to 0mm. Also increase the first layer thickness.Or, just use those profile that I put there. It all have been tested and confirm works.&nbsp;&nbsp;&nbsp;

Dragon Wand (Retractable) v1.5

Weapons

DrJones

This is probably my best fidget toy! I printed dozens of them because people asked for them.&nbsp;It&#39;s a small, but satisfying fidget toy. You&#39;ll probably not want to wear it all the day due to it&#39;s size, but it&#39;s unobtrusive enough so you can still do a lot of things while wearing it. But while wearing it, you have a fidget thing right at hand for some quick fidgeting. (I&#39;m wearing one as I type this; and fidgeting with it when thinking about what to type next.)&nbsp;Also the planet gears look like plus signs - for some positive influence :) and they look quite a bit mesmerizing when moving in perfect unison.&nbsp;I uploaded 4 sizes, 14mm, 16mm, 18mm and 20mm. If you need another size, ask in the comments and there&#39;s a good chance I&#39;ll make that.&nbsp;You might need to use a bit of force to break the gear loose at first, but after a bit of breaking in it is supposed to run quite smoothly.&nbsp;Happy fidgeting!&nbsp;Update: Added a 22mm version as STL (Download or Print → Download STL)

fidget gear ring

Fidgets

Josh-3D

IntroA Case/Stand for your Nintendo Switch, to make it look like a Retro TV!&nbsp;I remember this old TV my dad had when I was a kid, and something struck me, that I wanted that for my Nintendo Switch! A Retro TV styled case to stick it in, for a little added fun when I&#39;m not playing at the big screen. Comes with lots of handy spaces too, to tuck secrets in!&nbsp;The front panel uses magnets to keep secure. There&#39;s a pathway too, to allow for a USB-C cable for power and what have you.&nbsp;There&#39;s a secondary profile included, which has a stand for the TV, to lean it at a more comfortable viewing angle. Not required, but might be desired!<figure class="image image_resized" style="width:29.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_939e426832faf.png"></figure>UpdateAdded a print profile for the original switch! I don&#39;t have an original Switch myself, but a user here helped test the fit and looked good! Will update it if any issues crop up though. I printed a copy to make sure it still prints good and the buttons fit, and they do! Enjoy!&nbsp;Community SpotlightCheck out the <a target="_blank" href="https://makerworld.com/en/models/415649#profileId-317808" rel="nofollow noopener">accessories </a>made by <a target="_blank" href="https://makerworld.com/en/@SteveKeller" rel="nofollow noopener">@SteveKeller</a>! In particular Steve has done a remix of the volume/power buttons for the original, and so make sure to check those out, as I&#39;m willing to bet they&#39;ll have an improved fit (I don&#39;t have the original, so wasn&#39;t able to fully test the fit myself) Lots of other cool stuff too! &nbsp;Tools &amp; AssemblyFeatured Filament:Bambu PLA Basic BrownBambu PLA Metal Iridium GoldBambu PLA Matte Charcoal&nbsp;Tools needed:Hex DriverDrill bit (For clearing out holes on the front panel, for the knobs)&nbsp;Hardware needed:2 M3x8 screws (For the knobs)2 M3x10 screws (For the back)8 4mmx6mm magnets <a target="_blank" href="https://www.amazon.com/dp/B075PMYRFT" rel="nofollow noopener">(Here&#39;s an amazon link to the magnets needed)</a>&nbsp;On the front panel, clear out the holes for the knobs, so you can feed the M3x8 screws in. The holes were capped so the insets on the back side would print cleaner. Once the holes are clear, use M3x8 screws to attach the knobs<figure class="image image_resized" style="width:37.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_be95abb54b4eb.png"></figure>On the back, secure it using 4 M3x10 screws.<figure class="image image_resized" style="width:49.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_a4165b1b7550f.png"></figure>Insert the 3 buttons, making sure they line up length-wise. There will be an additional piece to insert in, to help secure the buttons in place when the switch isn&#39;t installed and the front panel isn&#39;t in.<figure class="image image_resized" style="width:50.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/820387/2024-03-10_26af293c328f3.png"></figure>Lastly, insert the 8 magnets into the front panel and main case. Be careful with the orientation of the magnets as you insert them! They are press fit and are a one way operation. The fit is very tight, so you wont be able to pull them out once they&#39;re in. Because they are very tight, it&#39;ll seem tough getting them in, but you can do it! I recommend using a tool or something that you can put the magnet on, to help aid in pushing it in.-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Useful

Containers

Games & Dice

Random Toys

Weapons

Fidgets

Switch accessories