user_3510810477

Clint’s Prints 3D

This prints in place in one piece without any needed supports. Just take it off your print bed, insert a JoyCon and you're ready to play!This will accommodate both the left and right JoyCon.This is v2.0 that uses a chamfer on the bottom rather than a fillet from v1.0 to improve printability.

JoyCon Controller Grip v2.0

user_1264226612

If you want to store many earrings but also look at them when you choose what you wear. You can take the cards out and put them back when you're done.

Earring holder storage

earring

Ben__Svo

7C sized trumpet mouthpiece, roughly modeled after a Bach 7C size mouthpiece.&nbsp;From Printables : https://www.printables.com/model/239000-trumpet-mouthpiece-7c

Trumpet mouthpiece 7C

music

Dish Engineering

Present to you V1 of Airless Ping Pong Ball ! The design was created to match international game regulation - mass of 2.7 grams (0.095 oz) and a diameter of 40 millimetres (1.57 in). Altough the mass is still 10% off, coming in in 3 grams, the bounce is actually really similar!&nbsp;Please do Print it with some stronger PLA, like PLA tough or super PLA+. A strong ABS/ASA is also a good choice, but a more rigid material will work better.Currently working on the model so it works better with a bigger variety of less strong PLA&#39;s.&nbsp;Thanks to your amazing help and feedback, version 2.0 is now up! Slight adjustments, Big results, check it out! - <a target="_blank" href="https://makerworld.com/en/models/376178#profileId-276163" rel="nofollow noopener">https://makerworld.com/en/models/376178#profileId-276163</a>&nbsp;Looking for a combo for you airless ball? Check out my recent professional spec&#39;ed airless ping pong racket! - https://makerworld.com/en/models/415669#profileId-317833&nbsp;

Airless Ping Pong Ball

sports

Marc Elbichon

Simple tea storage box with a window in the front to put a bag of tea as ‘label’, with lid.&nbsp;Stackable, easy to print&nbsp;Enjoy!

Tea Storage Box Organizer

household

Randers_manders

Introducing a 3 gram 3D Printed Glider – designed for simplicity and excitement. This sleek glider is crafted to be printed and ready for flight straight off the printer bed. With its optimized wing design and lightweight build, it effortlessly catches wind currents for smooth, precise gliding. ***Important - gently bend the tips of the wings upwards as seen in the photos to ensure optimal flight performance***

3g Glider (Ready to Fly)

plain

R C 3D

PRINT PROFILES:These are the print profiles that I've tested and can confirm to work well. Any profiles not listed below are not tested by me, and I cannot confirm whether or not they will work well. I recommend the Spool Adapter - w Slots. This one has the latest features and works the best of the three in my opinion.<ul><li>Spool Adapter - 200mm (Use at your own risk. This was requested, but I'm not 100% sure how well it will perform over time. Once I've had some time with it I will update this.)</li><li>Spool Adapter - w Slots</li></ul>&nbsp;SUMMARY:This spool adapter was designed to hold the cardboard spools and provide several features that assist in the ease of operation when using cardboard spools in the AMS. Here are the issues it's designed to address:<ol><li>When the walls of a cardboard spool become bent or deformed, they don't ride in the guides properly and end up causing issues in the AMS. This provides solid, sturdy walls that don't bend or deform.</li><li>The lip of the spool adapter is designed to provide a large enough surface contact against the rollers that it maintains traction. This isn't meant to snap onto the edge of the spool, but rather act as its' own spool end. The cardboard may be smaller in diameter, and this should still work great.</li><li>If you have issues due to spool weight, this has a core with a lid that can be used for desiccant or weights of some sort.</li><li>Recently I've discovered that this also works on some plastic spools such as esun which often have feed issues in the AMS. Based on feedback, this completely solved the issue for several people.</li></ol>To use the spool, simply drop your spool onto the spindle half. Screw the nut half onto the spindle and ensure your width will work in the AMS guides. Finally, screw on the locking nut to secure the end in place. To use desiccant or weights, simply drop them into the reservoir and screw on the cap.&nbsp;This has been confirmed to work with Overture, Polymaker, Elegoo, and a few other brands I'm not familiar with. With overture, you may have to crank down on the nut half to get the width right. For storing, I simply place the end in the cardboard hole and the sides hold it in place.&nbsp;CHANGELOG:&nbsp;UPDATE (10/25/23):I've added a second print profile. It will have “Thin” in the description notes or whatever. I'm adding this because some people are having issues with the width when using overture spools. I've seen several that were successfully installed, but for those that are having trouble, this one should be just a touch more narrow and may be what you're looking for.&nbsp;UPDATE (11/3/23):I'm adding another print profile for a spool with a smaller overall diameter. I've reduced it by a little over 1mm, which based on the feedback I've gotten, should solve the issue of the spool being too large overall for the new AMS version. If you have this issue with the other spools, give this a shot and let me know what you think.&nbsp;UPDATE (12/15/23):I added (2) new print profiles with an updated version of the spool adapter. I'm going to leave the other profiles up for now, but once I'm happy with the updates I'll be removing the other print profiles. The files will still be available in the raw files section, but I prefer having fewer print profiles.&nbsp;The spools was updated with little overhangs around the rim of the spool. I had a few spools where the cardboard would swell or deform, pulling away from the plastic sidewall. I added these little overhangs to help hold onto the sidewall and prevent it from pulling away. When it pulls away from the plastic, it creates rubs the side of the AMS guides and causes additional friction or snags the spool altogether. When I installed Polymaker into these, the overhangs just barely fit over the edges and held it in pretty well. If the spool has thick sidewalls, you'll have to push down on the sidewalls where the overhangs are at. I used a flathead screwdriver to shove the cardboard under the overhang.&nbsp;I also added some text, a Bambu logo, and RC3D. The colored version actually doesn't take much longer than the uncolored version, so don't be afraid to run that AMS now that cardboard is no longer an issue.&nbsp;UPDATE (1/9/23):Removed the Bambu reference and logo. Removed the small finger that were meant to hold the cardboard in place. Based on feedback, those weren't as well received, so I did away with them. If you'd like the model with the little nubby things, let me know.

Universal Cardboard Spool Adapter by RC3D

spool

hYPERfOCUS

<h2>Rocket Bowling</h2><h3>Like regular bowling but with ROCKETS!</h3><h4>Designed by hYPER fOCUS (that&#39;s me) - exclusively on Maker World.</h4>&nbsp;This fun and dynamic game includes a launcher with three rockets, 10 bowling pins, and a pin setting device for easy setup allowing you to set 10 pins perfectly in just a couple of seconds. You can play by yourself, or with many players. The rules can be the same as regular 10 pin bowling, or you can make up your own rules.&nbsp;The launcher can fire the rockets 20 meters, so you can set the pins nice and far away. 2-3 meters is ideal. The launch tube is aimable, and the launch button can deliver variable amounts of force.&nbsp;If you print two sets, players can sit opposite one another aiming at each others pins. (wear glasses or something, safety first.)&nbsp;I designed this game a few months ago in collaboration with my 5yrold son. Combining the concepts of bowling, with rockets. Because everything is more fun with rockets! We&#39;ve been experimenting with it for a while and having a great time.&nbsp;I get a huge amount of satisfaction hearing feedback from people whose lives are improved (even only a little bit) by my designs. I looking forward to putting Rocket Bowling out into the world and hearing stories of the fun you all have.&nbsp;<h2>ENJOY!!!</h2>Multicolour - my design philosophy when it comes to multi colour printing is to use a minimum number of colours and colour changes. Just enough to give the models some character, but without purging our lives away. I think there are a total of 7 or 8 colour changes for all build plates. But you also don&#39;t need multi-colour to enjoy the game.&nbsp;Support - Designed to be printed without any support at all.&nbsp;Infill - The pins use lightning infill to save a huge amount of filament&nbsp;Brims - Some of the models benefit from having brims. Especially pins and rockets. The last thing you want is to score a strike before the print is finished.&nbsp;Pin Setter - The biggest problem with manual bowling games is resetting the pins without knocking them over, and getting them nicely aligned seems to be impossible. The pin setter I&#39;ve design and included allows you to drop pins in upside down, pull the handles apart, place the pins and left the pin setters up. This means you can perfectly set pins in just a few seconds, taking the headache out of table top bowling games.&nbsp;Here is a score sheet you can print out to keep track of scores&nbsp;Standard Rules: Each pin that is knocked over scores 1 point.You have two launches per “frame” (or turn)Your score for the frame (or turn) is how many pins you knocked over.&nbsp;When you knock all ten pins down, you have a chance to score bonus points. If you knock over all ten pins on your first launch, this is a “Strike”. If you knock over all ten pins on your second launch, this is called a “Spare”.<ul><li>STRIKE: This is when you knock over all ten pins on your first launch. You place an “X” in the frame and this is equal to ten points, PLUS the next two launches. If you score a Strike in the final frame, you get two more launches. </li><li>SPARE: This is when you knock over all ten pins on your second launch. Place a / next to the number of pins you knocked over on the first roll (For example &#34;6/&#34;). You score ten points, PLUS the number of pins you knock over on the next turn. If you hit a spare on the final frame, you have one more launch to add to your score.</li></ul>For more detail on how to keep score, this is a helpful video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=aBe71sD8o8c"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/aBe71sD8o8c" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;The maximum score is 300, this can be achieved if you score 12 strikes in a row.&nbsp;Here is a score sheet you can print out to keep track of scores<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000454203/design/2024-05-03_5c5e8b671fecb.jpg"></figure>

Rocket Bowling by hYPER - Fun bowling game.

game

_donkey-brains_

One mace to rule them all?&nbsp;While there are a few adaptations of Sauron&#39;s mace scattered around the internet, I didn&#39;t necessary feel those were complete (no patterning), nor were they optimized well enough for printing and assembly (required internal structuring; a lot of post-processing). Therefore, I set out to model my own version from scratch that satisfied my own desired for a show piece. What I have here is a model designed entirely my me in fusion. I hope you enjoy it.&nbsp;This model consists of 21 pieces and 8 connectors to create a model that is ~46 inches long and can weigh upwards of 2kg. &nbsp;Printing Tips<ol><li>For my own print, I went with a silk filament because I hate post processing. While some parts can probably be printed flat, I have designed them to all be printed vertically. If using silk pla, I highly suggest to print all parts in the same orientation as that will give the best looking outcome. </li><li>I only own a P1S and have optimized this to print using most of the vertical space of that sized printer. If you have a smaller printer, I do apologize, but there are likely some spots where you can use the slicer to make parts smaller.</li><li>Any support I used were slim tree supports. I have uploaded my print profiles that I used which include manual tree supports. Threads, pattering, and small overhangs (like the handle rings) should not require any support. </li><li>I highly suggest to print the longer thread of the Lower Handle (Upper) piece facing up. This piece will be a weak point as it connects the lower handle to the rest of the mace. If that thread is printed down it will be supported and will be a weaker junction. I also suggest to use multiple bottom and top layers so this piece is strong.</li><li>Because the blades are optimized to be printed vertically, they have the pegs that will require support. Be sure to clean these supports well as the pegs being too large may effect final fitment. </li><li>Silk filament can give weird banding when cooling rate are different, so, if using silk filament, it may be a good idea to print each piece separately. This is what I did to ensure good consistency in the finish.</li><li>This print can probably use anywhere from 1kg all the way to 2kg of filament. Regardless, I highly suggest to make the lower handle sections either much more robust than the upper or, ideally, fully walled. My print profiles would culminate in a mace that weights about 1.7kg. </li></ol>Assembly Tips<ol><li>Assembly should be rather straight forward. I have attached pictures of the fusion model exploded into sections so as to be able to follow how to assemble. I suggest to assemble from the bottom to the top. I also suggest doing each section as a dry fitment before gluing everything together. After gluing any section, I suggest letting it cure for 24 hours before gluing attaching sections. </li><li>The threading has been given an ample offset, so these pieces should thread together easily. Thread each of the them together in the correct order dry and them take them apart and add a few drops of CA glue to the threads. Let these cure overnight. </li><li>For the upper handle section, Use the connector and CA glue to put the lower and upper sections together. Let cure 24 hours. </li><li>After both the lower and upper handle sections have cured, screw the lower handle section into the upper handle section. Use CA glue to bind these permanently. This will be a weakest point on the mace, so be careful. </li><li>Connect the upper and lower pike pieces using the large connector and CA glue. Let these cure 24 hours.</li><li>Using the smaller connector, connect the handle to the pike section. Fit this up with CA glue and let cure.</li><li>Dry fit each of the upper and lower blade sections into their respective positions in the pike. If these don&#39;t go in with no more than a little effort, ensure all support material has been removed. For blade assembly what worked best for me was:<ol><li>Add few drops of CA glue into each of the pike holes</li><li>Glue the blade connector into the bottom blade</li><li>Add glue to the top of the connector and place the top blade onto the lower blade and connector (this should give a few seconds to pull them apart when placing them into the pike holes). </li><li>Place the lower blade partway in to its pike hole</li><li>Place the upper blade partway into its pike hole</li><li>Press both the lower and upper blades all the way into their holes--this may require some wiggling and effort</li><li>Hold the upper and lower sections together vertically while pressing the entire thing toward the pike. Hold this for several seconds until glue sets. Then let cure fully before moving on to the next blade.</li></ol></li></ol>&nbsp;&nbsp;

Sauron's Mace

cosplay

Mirkosa

A customizable photo frame with built in saw-tooth style hangers and an optional stand. There are 12 different styles to choose from, including one&#39;s for the Cat and Dog Moms out there!&nbsp;There are blank versions for you to easily customize it with your own quote or vector directly within Bambu Studio. No modeling experience required.&nbsp;<figure class="image image_resized" style="width: 64.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451824/design/2024-05-03_5089a874c9911.jpg"><figcaption>Photo Dimensions, the teal outline represents a standard “Wallet” sized photo.</figcaption></figure><figure class="image image_resized" style="width: 64.01%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451824/design/2024-05-07_671857db2ed5b8.jpg"><figcaption>Wall hanger spacing</figcaption></figure>I recommend testing the ironing settings on a small print first. The back piece is designed to print either face up or face down based on your preference. My premade quotes are orientated face up to make it easier for people without an AMS to print it in multiple colors.&nbsp;The frame consists of a front and back piece printed separately. They are attached with printable screws. PLA is more than strong enough for these. But be careful not over-tighten the screws as they are fairly small and can easily be sheared from twisting too much.&nbsp;The stand is designed to attach directly to the back by replacing the 3 aligning screws with the longer ones provided. It&#39;s very secure and stable.

Diversity Hearts - Customizable Photo Frame

cute

duck.knapp

I&#39;ve wanted to build an insert press for a long time. then I looked for something that I didn&#39;t have to buy extra parts for and was &#34;good enough&#34;, but again I didn&#39;t find anything...&nbsp;&nbsp;so I developed my own press. You can print everything except 6x 608 zz ball bearings which you have to press in.&nbsp;&nbsp;For assembly you need: - First the 6 bearings are pressed in - join your arms - arms to the headpiece - arms with headpiece to the base&nbsp;&nbsp;It is important to ensure that everything is printed very precisely and does not wobble too much. It&#39;s better to be slightly too tight and grease it than to be too loose. The pins for tapping in should be tested beforehand. They are designed so that they have to be shuttered, but the material should not split apart.&nbsp;It&#39;s not an easy print but I think it&#39;s cool XD&nbsp;Material: PETG, ABS, Nylon or so&nbsp;btw: In the pictures you can see the old arms, now they are different lengthsand as always if you think of something that I can change/improve, please let me know

Heat Set Insert Press (99% 3D-Printed)

tools

Techro3D

Classic bird feeder | octagonal house | with mounting bracket| By Techro3D&nbsp;<ul><li>Water drainage.</li><li>Mounting bracket.</li><li>Suspension point for a fatball or other bird food.</li><li>Bottom also suitable for placing food.</li><li>Removable roof.</li><li>100% printable.</li><li>No glue required, but can be used just to be sure.</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453035/design/2024-05-04_a142276d19e56.png"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000453035/design/2024-05-04_bf6862079a949.png"></figure>

Classic bird feeder, octagonal house.

garden and animal stuff

IXPatch

This is a tiny shopping cart that can be printed in place with no supports or assembly required. The wheels roll and there's a basket divider that can be opened and closed to create a separate section within the cart.&nbsp;PLEASE NOTE that the long bridges on one side may pose a serious bridging stress test for some 3D printers. So while the model can be printed without supports, consider adding supports if your printer's bridging capabilities are not optimal. This will prevent the bridges from drooping and ensure a smoother surface finish for your print.

Tiny Shopping Cart (print-in-place)

dolls and smaller toys

MakerWorld

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/281253/2023-09-20_ca373507d148d.png"></figure>This 3D printed version of the tank strives to replicate the authentic details in terms of appearance, including intricate undercarriage details. It features a rotatable and elevating turret, three accessible hatches, rotating wheels and tracks, as well as a suspension system with articulated movement. Through careful disassembly, arrangement of components, and the addition of auxiliary structures, all parts can be printed without the need for supports. Furthermore, the openable chassis design preserves the potential for future internal structural DIY work.&nbsp;Parts count: 157Estimated build time: 1hTools: CA Glue-medium, hand drill, pen knife, sand paper&nbsp;More Details version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bmabu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.2mm Stainless Steel & 0.4mm Hardened SteelPrint time: 50.8h&nbsp;&nbsp;&nbsp;Time Saving version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bambu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.4mm Hardened SteelPrint time: 13.9h&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures when printing small parts&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.

Panzerkampfwagen IV Tank

trucks and cars

3DPmom

<figure class="media"></figure><img class="image_resized" style="width: 30.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/4cca814b-4b11-4bac-b93b-13fad0445fb7">For those who need a little more variety in their carrot garden, I decided to expand on it to make a full fidget garden 🌽🥦🍅 I have included the small (collapsible/expanding) carrot and added a rotating radish (spinning top), a bouncy broccoli, a corn on the cob fidget (with rotating rows of corn) and two different dirt beds + planter boxes (long or square) options. &nbsp;<img class="image_resized" style="width: 30.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/11b6fec2-ec29-47b6-9350-dd3e7a7a5ddf">Small Carrot3D PRINTING SETTINGSLayer Height 0.2mmPLA works great15% Infill&nbsp;Plate #1: Small Carrot (two colors)&nbsp;Note: I recommend printing carrots on a smooth print plate (can use glue stick/hair spray to help with first layer adhesion if necessary).&nbsp;Also to cut down on purge waste but still get a multicolor print you can pause the print at layer height 31.0 mm (layer 155) to change out the filament color.&nbsp;Rotating Radish3D PRINTING SETTINGSLayer Height 0.2mmPLA works greatInfill (this is important!):Print the Radish Top and Peg with 15% infillPrint the Radish Bottom with 60-70% infill (this is important because it lowers the center of gravity and helps it spin better:)&nbsp;Note: I recommend printing these pieces on a smooth print plate so the bottom of each piece is real smooth and fit together nicely.&nbsp;Plate #1: Radish Top and peg (two colors)Plate #2: Radish Bottom (two colors)&nbsp;If you would like to print a multi-colored radish with less purge waste, you can do the following:For Radish Top add a pause print at layer height 15.0 mm (or layer 75) to change the filament colorFor Radish Bottom add a pause print at layer height 14.0 mm (or layer 70) to change the filament color&nbsp;To assemble: insert the peg into the hole of the Radish Top and then the Radish Bottom connecting the two pieces together. You may also use superglue if necessary to secure the peg in place or the two halves of the radish together.&nbsp;Bouncy Broccoli3D PRINTING SETTINGSLayer Height 0.2mmPLA works great15% Infill&nbsp;Notes: I recommend printing broccoli pieces on a smooth print plate. Also, I turned on the fuzzy skin texture for the broccoli head to give it more texture.&nbsp;Print Plate #1: Broccoli HeadPrint Plate #2: Broccoli Stem&nbsp;Assembly: Insert the top of the stem (spiral portion) into the base of the broccoli head. You can secure with a little superglue if needed:)&nbsp;Corn on the Cob Fidget3D PRINTING SETTINGS:Layer Height 0.2mmPLA works great15% Infill&nbsp;Note: I recommend using a brim on the ‘rod’ piece and using a smooth print plate for all the pieces.&nbsp;Print Plate #1 includes: Corn rows 1-7 and rod (one color)Print Plate #2 includes: Corn husk (one color)&nbsp;To assemble: I placed a number on each row of corn. Place the rod into the hole of Corn Row #7 then slide on corn row #6, then corn row #5, etc. If needed you can a drop of superglue onto each end of the rod before placing it into the hole of row #7 and row #1 to secure it better.&nbsp;Dirt Beds &amp; Planter Boxes3D PRINTING SETTINGS:Layer Height 0.2mmPLA works great15% Infill&nbsp;Print Plate #1: Long Bed of Dirt (one color)Print Plate #2: Long Planter Box (one color)Print Plate #3: Square Bed of Dirt (one color)Print Plate #4: Square Planter Box (one color)&nbsp;<img class="image_resized" style="width: 30.61%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/cc30c650-a5b9-4388-ab23-771346110a1f">I added print profiles for an all corn (long) bed of dirt, an all broccoli (long) bed of dirt and an all radish (long) bed of dirt.  These will all fit into the &#39;Long Planter Box&#39;.&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/8d890950-fa45-4be2-9525-79cba3496680">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000417449/design/e822000f-9c9a-4e94-a1fc-01cc5e578b63">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing:)

Fidget Garden

baby

3D Prints This Week

This one works with 4 colors. It will show 5 when you load it in. Just send both of the whites to the same slot. One is for the text if you want to change it to something else. I just did white.&nbsp;Load red, green, black, and white, into the ams.&nbsp;If you like the way it comes out, give me a boost, feel free to drop a tip in the link below, or a 5 star review always helps too.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Funny Coaster / T-Rex / Foodie / Dino / Drink 

funny

uhltimate

Create your own OTF (Out-The-Front) fidget knife with just three 3D printed parts! This compact design is perfect for restless hands, providing smooth OTF action for endless fidgeting fun. Watch my YouTube video for assembly instructions and start printing your own today!&nbsp;Update:01.05.2024 - Added a guided Blade Version with a stronger locking mechanisms.02.05.2024 - Added a comb Version as alternative.&nbsp;Features:<ul><li>Three easy-to-print parts</li><li>Smooth OTF action</li><li>Portable design for on-the-go fidgeting</li></ul>Instructions:<ol><li>Print the three parts.</li><li>Follow our assembly video.</li><li>Enjoy your custom OTF fidget knife!</li></ol><figure class="media"><div data-oembed-url="https://youtu.be/IQcEFHvocRc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/IQcEFHvocRc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

OTF Fidget Knife - only 3 Parts

knife

Stigern

V2 Added:&nbsp;Two new drawers, with split or four split.Added a stopper, stops it from being pulled all the way out.&nbsp;Simple drawer, stackable ontop of each others.&nbsp;Size is 125x150x60mm&nbsp;Great for sorting stuff.&nbsp;&nbsp;PS:&nbsp;If you enjoy my designs and maybe want to contribute, you can make a small donation to <a target="_blank" href="https://www.paypal.com/donate/?business=T3KK6HAMWRUPL&no_recurring=0&item_name=If+you+like+my+designs+and+want+to+contribute.&currency_code=NOK" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Stackable drawer/container

RTX_Nitrox

Immerse yourself in the world of tactical operations with our meticulously crafted 3D-printed Glock 19 replica, complete with a silencer for added realism. Designed for enthusiasts and collectors&nbsp;Authentic Design: Our Glock 19 replica faithfully reproduces the iconic design and intricate features of the original firearm, ensuring a visually stunning and true-to-life replica.Interchangeable Magazine: Enjoy added versatility with a removable magazine that allows you to simulate reloading, providing a dynamic training experience or adding authenticity to your display.Moving Trigger: Enhance your immersion with a movable trigger, offering a tactile sensation and adding realism to your handling of the replica.

Glock 19 v7 with Silencer movable trigger

HDVPrintFarm

I remixed the skeleton parts in Tinkercad into a simple kit card making it great for kids and party&#39;s. I made to the links connecting the bones only two layers thick at 0.2 layer height, making for easy removal. Check out the original designer <a target="_blank" href="https://www.thingiverse.com/bitsnbolts/designs" rel="nofollow noopener">https://www.thingiverse.com/bitsnbolts/designs</a> for extra add on&#39;s.Print Settings:0.2mm Layer height0.4mm Nozzle2-3 wallsI like 100% infill but 10-20% is fineNo Supports No BrimSlow first layer

Skeleton Kit Card-Tinkercad

bone large

sipura

Hello,UPDATE 26/1/2024:You can check you our new model, same like this one but XL bigger. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/157759#profileId-173134" rel="nofollow noopener">https://makerworld.com/en/models/157759#profileId-173134</a> &nbsp;&nbsp;UPDATE 19/1/2024:You can check you our new model, same like this one but smaller. Inner containers are compatible.<a target="_blank" href="https://makerworld.com/en/models/146935#profileId-160286" rel="nofollow noopener">https://makerworld.com/en/models/146935#profileId-160286</a> &nbsp;My new model of the utility case.&nbsp;Simple print without supportAll parts are completely printed with PLA, only the gasket needs to be printed with TPU in order to close smooth and seal nicely.&nbsp;To assemble it, you need:6pcs M3 nuts2 pcs of screws M3x303pcs of screws M3x18&nbsp;Dimensions are in mm:&nbsp;<figure class="image image_resized" style="width:65.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_e25480cf53e6d.png"></figure><figure class="image image_resized" style="width:65.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-02-10_97292542d7a98.png"></figure>NEW:&nbsp;Now we made V2 model that has thicker hinges on each side by 1mm behind, and wall loops with 3pcs. For this model, instead of 3pcs M3x18mm screws, you now need 3pcs M3x20mm.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/802624/2024-01-13_6bc78c7c28bab.jpeg"></figure>&nbsp;Also, if you need some custom accessories for all our models, you can contact us on our patreon page which is in bio.&nbsp;Enjoy printing and using this useful case.

Utility OG case

handy

3D Art

Ich habe endlich mein eigenen AMS Aufsatz konstruiert so wie ich es benötige und optisch Cool und praktisch finde.(inspiriert von Ben Levi)&nbsp;-Größeres Fach für Druckplatten.-Sortierte Zubehör Schublade. für nozzle,etc.-integriertes LED zum Anschrauben mit M3 Schrauben/Muffen.&nbsp;LED: <a target="_blank" href="https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>Gewindeeinsätze M3: <a target="_blank" href="https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694" rel="nofollow noopener">https://www.amazon.de/ruthex-Gewindeeinsatz-Sortimentskasten-St%C3%BCck-Kunststoffteile/dp/B08K1BVGN9/ref=asc_df_B08K1BVGN9/?tag=googshopde-21&linkCode=df0&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694&psc=1&mcid=d1c8f62ec46d31139b06805550f3488f&th=1&psc=1&tag=&ref=&adgrpid=79663322117&hvpone=&hvptwo=&hvadid=389361341920&hvpos=&hvnetw=g&hvrand=6385810813141284926&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9114679&hvtargid=pla-977557319694</a>M3 Schrauben: https://www.amazon.de/St%C3%BCck-Linsenkopf-Schrauben-M3x6-Linsenkopfschrauben/dp/B07K7NRDPX/ref=sr_1_2?&nbsp;I have finally designed my own AMS attachment the way I need it and find it visually cool and practical.(inspired by Ben Levi)-Larger compartment for printing plates.-Assorted accessories drawer. for nozzle, etc.-integrated LED for screwing on with M3 screws/sleeves.&nbsp;LED: https://www.amazon.de/dp/B0B1J69YMH?psc=1&ref=ppx_yo2ov_dt_b_product_details&nbsp;I would like to share my work with you and hope you have fun and enjoy it.&nbsp;

AMS Riser Superstructure by 3D Art/ X1/P1

3d printer mods

Sakul

Cozy Minecraft Lamp compatible with the BambuLab Led Lamp Kit. Bring this comfy lantern from your favorite block game to your home and use it as a desk lamp or even as a night light. No glue, screws, or additional parts needed, the complete lamp is assembled with 3D printed clips, making the build process straightforward and fun.No AMS needed. The Lamp Kit can be found <a target="_blank" href="https://us.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">here</a>! The LED Kit works great with a standard smartphone brick or a power bank, making the lantern a portable option as well. How to build: The whole lantern is assembled using these 3D printed connector clips. You need 14 of those.<figure class="image image_resized" style="width: 31.27%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_5bf6ea8a01c34.jpg"></figure>Print all the parts and start clicking the upper part together. If you need to remove a clip again, it&#39;s best to use some pliers.<figure class="image image_resized" style="width: 85%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_ea97b21669c86.jpg"></figure>Next, connect the side blocks to the bottom part and add the LED light by simply pressing it in from the bottom. There are also some TPU feet you can add to the bottom part, but that is optional.<figure class="image image_resized" style="width: 84.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_f5cddf280a52a.jpg"></figure>Now slide the window parts in from the top. You can achieve many different looks by playing around with the choice of color here. For the original looks, normal yellow or blue filament works great.<figure class="image image_resized" style="width: 35.46%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_c310a536111c8.jpg"></figure>Lastly, put the top and bottom part together and enjoy!<figure class="image image_resized" style="width: 35.19%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-01-28_0c134d5dabc89.jpg"></figure>&nbsp;&nbsp;If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>   Check out my newest Uploads:&nbsp;<figure class="table" style="width: 96.81%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-06-04_0f30fee0f9ea4.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/457919#profileId-365927" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000161106/design/2024-05-08_184f6d673bf23.jpg"></a><figcaption>🐺🦊Minecraft Forest Animal Pack🐝🐇</figcaption></figure></td></tr></tbody></table></figure>

Cozy Minecraft Lantern for LED Lamp Kit 001

light

星骸造物-StarK

SH-02《降临行者》外装甲  Arrival Walker-SH-02

robot

Encrust3d

&nbsp;This is a remix of the T. rex skeleton from Makerbot. When I printed this, there were a few things I really did not like about the design, so I made some changes. When I was assembling the skeleton, the ribs could constantly fall out at the slightest touch. The design for some of the ribs had one or two .4mm layers as the clips, which made them break super easily and were very prone to falling out. I reinforced all of the ribs to ensure no glue was needed to keep them in place. Another thing I did not like was how the T. rex was pretty much facing down. I edited the base beam to make the T. rex look up some, while still being able to balance on the base. Here is a before and after picture with the original beam and the beam I redesigned.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/586025/2024-02-17_5b649a52946bf.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/586025/2024-02-17_bc0ab4c8ca9b8.jpg"></figure>This print does need supports on some pieces to print properly. The .3mf I uploaded has supports where needed and support blockers where no support is needed, but the slicer wants to add them anyways. Some glue may still be required to properly connect the neck and tail pieces.&nbsp;Assembly Instructions can be found here:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/586025/2024-02-25_0ad9c5cfb46f8.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/586025/2024-02-25_c4a4a50471dd2.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/586025/2024-02-25_58cbfb2d6df9d.jpg"></figure>

Reinforced T. rex Skeleton - fixed

bone

Lazy_Mardeux

I made a desiccant tray that snaps with the original desiccant cover for the Bambu Lab AMS.&nbsp;I simply used PLA and .2mm standard settings for printing.&nbsp;This should fit just perfect in your ams if it&#39;s the same as me. I bought it early 2024.To install the original cover on the desiccant tray, start by joining the part closest to you by first lining up the pimples with the holes on the cover, and then snap it with the tab on the back.The tray is placed in the AMS just like the cover alone would be placed; inserting the 2 front tabs in place, and snapping the back tab in place.&nbsp;NoteThe original cover holds most desiccant beads, BUT, smaller beads can get through the holes, so don&#39;t overfill and turn upside down.&nbsp;&nbsp;

BambuLab AMS Desiccant Tray w/ OEM lid

dessicant 

3D design shop

After a long journey, I've finally completed my flexible skeleton dragon.&nbsp;It's a fun piece of toy that's incredibly flexible, with virtually all joints capable of movement. It has become a huge hit with the kids at home!&nbsp;I printed it on a smooth surface, which eliminates potential issues with adhesion on a textured bed. If adhesion problems persist, I recommend adding a brim.&nbsp;Improved version

wii