零件螺丝托盘 Component screw tray, organized storage with clear visibility, suitable for screws, nuts, washers, small hardware, electronic components, and other small items. Made of thickened material, sturdy and durable, with compartmentalized design for easy access. It is a practical storage assistant for workshops, repairs, assembly, and DIY crafts. Size 80*80*8, STEP files also available for free CNC prototyping from JLCPCB.

沥水香皂盒，不泡水，防掉落 Draining soap dish, does not retain water, prevents slipping

拓竹LOGO，钥匙扣，原stl文件较大，可自行缩放。3mf文件应该是单色，一个是突出双色 Keychain, the original STL file is relatively large and can be scaled on your own. The 3MF file should be single-color, with one version highlighting two colors.

耗材线夹，可夹料盘1-4mm，适合大部分料盘，只需要7分钟1.8g料即可 Consumable wire clips, can clamp material trays 1-4mm, suitable for most trays, only takes 7 minutes for 1.8g of material

开香肠器，推荐0.1层高，越小越好，只需要1.23克料，6分钟打印时间 For the sausage maker, it’s recommended to set the layer height to 0.1; the smaller the better. It only requires 1.23 grams of material and 6 minutes of printing time.

解压可爱咔哒按钮，喜欢的可以来打印 若有不会弹可以右棱边往下按 Unzip the cute clicking button, and you can print it if you like. If it doesn't pop up, try pressing down on the right edge.

详细购物清单已在图片，往后翻即可查看，还需自己购买一块大于44小于40的圆形led灯板3.7v或以上的最好不超过5v The detailed shopping list is in the pictures; you can flip through to view it. You will also need to buy a round LED panel larger than 40 but smaller than 44, preferably 3.7V or higher, but not exceeding 5V.

爪刀，更新了竖直打印配置，实现完美刀尖。可一体打印，可Z轴分割打印，再用丙酮沾起来，已有现成配置，喜欢的可以下载，感谢支持 Claw blade, updated with vertical printing configuration to achieve a perfect blade tip. It can be printed in one piece or split along the Z-axis. Then you can use acetone to fuse it. A ready-made configuration is available; if you like it, you can download it. Thank you for your support.

A系列单机线束器，有用的你就来 A series standalone harness device, if it's useful, come and check it out A series standalone harness device, if it's useful, come and check it out

高强度热床推刮刀High-Strength Heated Bed Scraper

Dice fingertip spinner, 3D printed as a single piece with no assembly required. It can be used as a dice to roll numbers or simply for fidgeting. The axle configuration has been uploaded, offering smoother spinning when used with the axle.

If you have an unused voltmeter at home or want to DIY a simple and practical voltage measuring tweezer, take a look. You will need two M2*8 countersunk machine screws, one 3-wire 0.28-inch voltmeter, and two 45mm iron or copper wires. It's very simple.