James Edwards

RATIO PRODUCT LAB

A weather cap to further protect the BLINK Doorbell from rain, sun and other outdoor debris like sap or bird droppings. Simple to print in PETG with no supports. No fasteners required, just place on top of the cam.

BLINK Doorbell // Weather Guard Cap

blink cameras 

Vegatype

This is a remix of The Standard 4x5 from Standard Cameras (<a target="_blank" href="https://standardcameras.com/" rel="nofollow noopener">https://standardcameras.com</a>) and has been shared with permission from the owner Drew Nikonowicz (<a target="_blank" href="https://nikonowicz.com/" rel="nofollow noopener">https://nikonowicz.com</a>). The bellows and ground glass needed for the camera can be purchased directly from them!&nbsp;I was building the Standard 4x5 when ideas on how to improve the desing started to flow. My goals were to add features, simplify assembly and use more widely avaliable materials. I called this redesign Vega 4x5, in honor of the first star ever photographed. The project file is open and avaliable in .f3d format as i want to make it easy for everyone to modify and customize anything about the camera, i look forward to the community contributions, let's keep film photography alive!<h3> </h3><h3> Modifications List:</h3>&nbsp; • Geometry was mostly simplified as i liked a cleaner look. • 21 metric screws instead of 66 imperial screws of 9 different lenghts/types. • Printed part count was reduced from 24 down to 14. • Better tolerances for the metric rail less play and smoother operation of the sliders. • All files are in the best orientation for printing no need for supports. • Tripod mounting via heat-set insert instead of a tee-nut which seems impossible to find here in europe. • Bigger knobs with a new pattern i found it difficult to tighten the old ones and to keep the files at a minimum i used the same size of knob for all of the camera. • New printed forks allow for more movements: the rear standard now also has rise, fall and tilt, the last of which was impossible to get with a double fork arrangment due to the obstruction of the darkslide (when in landscape orientation). • Forks simply click in the zero position thanks to recesses in the tracks, instead of having to rely on visual marks. • Front standard is now printed in one piece for an easier assembly • New film holder clips allow for changing film orientation (portrait/landscape) while the rear standard is tilted • Simpler mounting of the standards via 2 bolts. • Easier bellows swapping done by loosening 4 screws at the top of the standards. • Rear standard overhang is now 55 degrees as it was difficult printing the original part without sagging. • Spirit levels on both standards for more precise adjustments.&nbsp;<h3> Parts list:</h3>&nbsp;<h4> Fasteners:</h4> • 14x M3X10mm Button Head Screw • 4x M6X30mm Hex Bolt • 3x M6x50mm Hex Bolt • 7x M6 Hex Nut • 1x 20x1/4” heat-set insert <h4> Miscellaneous:</h4> • 1x 25x25x300mm Aluminum Extrusion • 1x 127x102mm Ground Glass • Bellows (specifications found here: <a target="_blank" href="http://manual.standardcameras.com/0_e/" rel="nofollow noopener">http://manual.standardcameras.com/0_e/</a> ) • Large Format Lens • Linhof Lensboard (STLs provided) • 2x 10x10x29mm Spirit Level • About 20cm of 1.5-3mm Elastic Cord • 2x 25x25mm Endcaps The bellows and ground glass can be made, but i highly suggest buying them from the folks over at Standard Cameras, as they are a drop in replacement and it's not easy to source all of the required materials, here's their shop: <a target="_blank" href="https://standardcameras.com/collections/all." rel="nofollow noopener">https://standardcameras.com/collections/all.</a> Other sources are for example ebay or <a target="_blank" href="http://www.custombellows.co.uk/" rel="nofollow noopener">http://www.custombellows.co.uk/.</a> It's also possible to 3d print bellows with 95A tpu, either in one piece with a 400mm Z axis printer (Stl and bellows generator are in the files section) or in two parts, see Kiwi Tinkerer design: <a target="_blank" href="https://www.printables.com/model/250318-camera-bellows-in-two-parts-with-modified-vega-fra" rel="nofollow noopener">https://www.printables.com/model/250318-camera-bellows-in-two-parts-with-modified-vega-fra</a><figure class="image image_resized" style="width:357px;"><img src="https://media.printables.com/media/prints/236655/rich_content/2310b633-191a-4c91-ac35-a7fabad85bb5/ezgif-2-253f68dc4a.gif"></figure><blockquote>Note: 3D printed bellows made lightproof with 5 coats of matte black plastidip</blockquote><h3> </h3><h3> Printing:</h3>All the models are provided in the best orientation for printing, no supports needed. The following parts need to be printed in black: Front Standard, Rear Standard, Film Holder. Here are the suggested slicer settings:&nbsp; • PLA is fine, but PETG or ASA are better for outdoor use • 0.2 Layer Height • 3 perimeters • 30% Cubic Infill • 5 Top and Bottom Layers • Supports turned off&nbsp;With these settings the material cost for the whole camera is about 780g, at standard speed the print time is about 68 hours, no more and no less than the original files. Printing files are provided for the different materials, all settings already adjusted, divided in three batches.&nbsp;<h3> Assembly: </h3><h4> Rail:</h4><figure class="image image_resized image-style-align-center" style="width:714px;"><img src="https://media.printables.com/media/prints/236655/rich_content/ee340fb9-4f52-4dc2-ad34-435104937d61/thumbs/cover/800x533/png/1.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/6a290875-1dd7-41cd-8242-afcbca490c30/thumbs/cover/800x533/png/2.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/0f5c0fb0-6d5a-4473-afdf-e92404e18ec8/thumbs/cover/800x533/png/3.webp"></figure><blockquote>Note: To use the heat-set insert even a cheap soldering iron will work just fine. </blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/59ce787d-15ce-40ce-b958-5aa30003d5cd/thumbs/cover/800x533/png/4.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/db002353-d30d-4666-ba8a-7bde4689dde8/thumbs/cover/800x533/png/5.webp"></figure><blockquote>Note: Insert the M6X30mm bolts before the M6X50mm (Sliders).</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/9b0fe580-f630-406e-a442-60463a4fdf96/thumbs/cover/800x533/png/6.webp"></figure><blockquote>Note: Make sure that the M6x30mm bolts sit flush and don't tighten the knobs yet.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/ed6d0b80-5c4b-4637-abd1-715ae633444d/thumbs/cover/800x533/png/7.webp"></figure><blockquote>Note: Once you slide the parts on the rail, you can tighten the knobs to lock them in place. All knobs should face the right side of the rail. </blockquote><h4> </h4><h4> </h4><h4> Forks:</h4><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/2e0fa5b0-7245-499a-8e41-16db143f2884/thumbs/cover/800x533/png/8.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/80efded8-6533-4e06-b487-b68ee3e3243f/thumbs/cover/800x533/png/9.webp"></figure>&nbsp;<h4> </h4><h4> Front Standard:</h4><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/a62db279-b7f9-4472-a2b2-76e8be954a25/thumbs/cover/800x533/png/10.webp"></figure><blockquote>Note: I didn't have the levels on hand, so you won't see them in the other pictures. To mount them you just have to glue them in the slots at the top of the standards.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/3348eb01-a888-47b7-b742-71f063002874/thumbs/cover/800x533/png/11.webp"></figure><blockquote>Note: Don't overtighten the graflock clip, it should feel solid but still be able to slide.</blockquote>&nbsp;&nbsp;<h4> Rear Standard:</h4><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/08be9ee5-7603-46c5-9523-bb134cf34427/thumbs/cover/800x533/png/12.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/2dde62c0-d220-4609-8db7-2044d8086e34/thumbs/cover/800x533/png/13.webp"></figure><blockquote>Note: Don't overtighten the top clips, they should feel solid but still be able to slide.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/bf0f63ed-21f0-49a6-86c5-35e0ed76044f/thumbs/cover/800x533/png/14.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/ab61e233-3661-4c92-bb9e-b6df45e6cb36/thumbs/cover/800x533/png/15.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/304fd392-788b-4af8-90a5-8cd68c675f5a/thumbs/cover/800x533/png/16.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/01a09b78-7ba5-47e8-8150-749e495bd15e/thumbs/cover/800x533/png/17.webp"></figure><blockquote>Note: Tie a knot on one end of the cord, insert it and make another knot on the other side.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/3d59b93b-03de-4748-8489-002afe741d5c/thumbs/cover/800x533/png/dsc0255.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/1fb0404a-f2d6-4251-b573-3124dc2a1b16/thumbs/cover/800x533/png/18.webp"></figure><blockquote>Note: Insert the elastic cord in the ground glass holder slots.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/3675320f-c15e-4075-87c3-2dd5ae3ebd76/thumbs/cover/800x533/png/20.webp"></figure><blockquote>Note: The film holder can be inserted both in portrait and landscape orientation. to lock the holder in portrait orientation, slide the top clips downwards instead of rotating them.</blockquote><h4> </h4><h4> </h4><h4> Final assembly:</h4><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/32e2de0a-fcf0-441b-916a-dc88925edb28/thumbs/cover/800x533/png/21.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/63bb2cb6-271f-4ca1-bf30-51b5d2ce7892/thumbs/cover/800x533/png/22.webp"></figure><h4> </h4><h4> </h4><h4> Bellows:</h4><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/a627d170-eb60-4aa8-bdba-a9db337dc668/thumbs/cover/800x533/png/23.webp"></figure><blockquote>Note: Insert the bellows frame in the bottom ridge, mind the frame's orientation. I had to improvise the bellows to illustrate the procedure as i didn't have them at the time.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/e3919a30-4832-4ae8-92bf-6e58d7754db0/thumbs/cover/800x533/png/24.webp"></figure><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/f7de86cb-2d1c-4938-9eff-13564277f35b/thumbs/cover/800x533/png/25.webp"></figure><blockquote>Note: Once you insert the bellows frame, lock it in place with two screws at top of the standard, these will sit just behind the frame. The process is the same for the rear.</blockquote><h3> </h3>Done, you now have your own Vega 4x5! Grab a 4x5 lens, some film holders, a tripod and go out shooting! This camera is very light and can fit in a small backpack, you just have to loosen both standards and remove them from the rail, so it's perfect to carry around. I'd love to see your builds, feel free to upload them in the make section!&nbsp;<h3> How to operate:</h3><h4> </h4><h4> Lens swapping:</h4><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/4d14e1e3-d0d1-44ac-bd90-ea9a31c4e314/thumbs/cover/800x534/png/26.webp"></figure><blockquote>Note: Insert the lower side of the lens board in the bottom ridge. Here i'm using a 35mm lens just to illustrate the procedure as i didn't have a LF lens on hand.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/ae7f2712-b381-4cf4-878b-83b1ca7e240e/thumbs/cover/800x533/png/27.webp"></figure><blockquote>Note: Once you insert the lensboard lock it in place by lowering the graflock clip.</blockquote><h4> </h4><h4> Exposing film:</h4><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/293a0cc3-ecff-4061-8f30-f6cf23f1a5d4/thumbs/cover/800x534/png/28.webp"></figure><blockquote>Note: Insert the magazine between the Ground glass Holder and the film holder.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/55d87e33-57dc-436a-8b9b-58fecde9f38b/thumbs/cover/800x533/png/29.webp"></figure><blockquote>Note: When you feel a click, the holder has been correctly inserted and is now lightproof.</blockquote><figure class="image"><img src="https://media.printables.com/media/prints/236655/rich_content/43ce4f7d-8d92-4e11-8018-49799150869c/thumbs/cover/800x533/png/30.webp"></figure><blockquote>Note: When you're ready, remove the darkslide and make the exposure. to take out the film magazine pull it backwards to disengage the lock, then slide it out.</blockquote>&nbsp;<h3> Technical Specifications:</h3>&nbsp; Compatible Lensboards: Linhof style Max Front Tilt and Swing: +/- 45° Max Rear Tilt and Swing: +/- 45° Front Rise/Fall: 50mm Up / 45mm Down Rear Rise/Fall: 70mm Up / 20mm Down Front Shift: +/- 30mm Rear Shift: +/- 55mm Weight: 1kg

Vega 4x5 View Camera

Camera 

盒理HeLi DIY

手部解压玩具<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1G94y1n7E6/"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1G94y1n7E6&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1G94y1n7E6&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

萝卜弩解压玩具

Toy and Puzzles

user_2479700816

This is to help with the process of scanning 35mm film on a desk(loading and catching). This model is made for a 1.25&#34; thick desk. If printed at 97% it will be a snug press fit and will not need the added screw. Make sure to not print supports on threads if you are panning to use them. Also with tree supports you might need to slow down the print for the top half. Or maybe other supports would work better? Happy printing and scanning:)

35mm Film Catcher

Film Photography 

SNASA

This is a small and stealthy minimalist heat insert press designed for CNC Kitchen TS100 heat insert set. I didn&#39;t want to use a counterweight so I made an invisible spring and belt system hidden in the vertical part. Its size makes it perfect for small job on the workbench :<figure class="image image_resized" style="width: 42.73%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_a86cd65962c1d.jpg"></figure><figure class="image image_resized" style="width: 42.59%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_4f0eadde94f.gif"></figure>&nbsp;The sides are super convinient to store everything you need (there is also a spot for a small alen key).&nbsp;I have added the step files if you want to design your own soldering iron mount or use a different base.&nbsp;Miscellaneous:<ul><li>20 * M3 brass insert</li><li>22* M3x8</li><li>1 * M3x6 screw</li><li>2 * M3 Nut</li><li>3 * M3x25 screw</li><li>7 * M5 nut</li><li>6 * M5x10 or M5x12 screw</li><li>1 * M5x16 thumb screw</li><li>2 * GT2 idle pulley ID Ø3mm</li><li>1 * GT2 belt (200mm should be enough)</li><li>1 * Spring or elastic band</li><li>1 * LML12B 200mm linear rail</li><li>1 * <a target="_blank" href="https://cnckitchen.store/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free" rel="nofollow noopener">CNC kitchen Heat Insert Set</a></li><li>Optional :<ul><li>1 * M4x8 Screw</li><li>1 * M4 nut</li></ul></li></ul>Assembling:<ul><li>Insert M3 brass insert (see red arrow below)</li><li>Use M3x8 screw everywhere except 1 * M3x25 (see orange arrow below)</li><li>Use 1 * M3x6 screw to lock the spring or elastic band</li><li>Use 2 M3x25 to mount the GT2 idle pulley</li><li>Insert M5 Nut (see yellow arrow below)</li><li>Make sure to run the belt before assembling the GT2 idle pulley</li><li>Use a small piece of adhesive tape to secure the belt on the arm mount (makes it so much easier to mount the belt on the sliding carriage)</li></ul><figure class="image image_resized" style="width: 79.45%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_86b4fd1a3ef78.png"></figure><figure class="image image_resized" style="width: 35.29%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75b2c88e1b92e.png"></figure>&nbsp;Print settings:<ul><li>PETG for the soldering iron holder, other part can be printed in PLA</li><li>Layer height : 0.2 mm</li><li>No support</li><li>Print orientation as shown below :</li></ul><figure class="image image_resized" style="width: 54.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430484/design/2024-04-18_75456e3a941b9.jpg"></figure>

Minimalist Heat Insert Press

Tools

PriscoRulez

Introducing the Trolex, a 3D printed working watch powered by a Miyota 2035 Quartz movement. Shock your watch-collector friends with a custom piece that will certainly attract their interest!With its 41.3mm size, this timepiece can adapt to most wrists and for all the occasions provided you use filaments that suit your taste. It is fully working and relatively easy to put together.Create your own personal wristwatch and show the world your style! Now, I also added a custom text version of the dial for your special messages.&nbsp;&nbsp;Important notes: Dial, hands and back case require a 0.2mm nozzle. The other pieces can also be done with 0.4mm nozzle, to allow more filament options (e.g. marble, sparkle, etc.) but would benefit from a 0.2 nozzle for higher quality.&nbsp;To work the watch requires a Miyota 2035 quartz movement, which is easy to find online and fairly cheap, but could be adapted to other movements by creating a custom inner movement holder. I got 5 for 9£ from Aliexpress here: <a target="_blank" href="https://www.aliexpress.com/item/1005006170752556.html" rel="nofollow noopener">https://www.aliexpress.com/item/1005006170752556.html</a>&nbsp;I do not own an AMS, so the watch is designed to be printed without one, for multi-color dial there is a pause set at the start of the 14th layer and change filament. If you do not want to change filament you will have to resume print to finish it, or remove the pause before slicing the plate. &nbsp;There are now two options for the wristband: flexible to be made with TPU (as in the cover picture) and rigid for any other filament.The rigid version is made up of pieces that need spare filament wire to be held together. This allows to adjust size by removing or adding more pieces.&nbsp;Needless to say the hands are the hardest part to get right and might require a few print (I am still working on a more reliable version of these). For reliability I would recommend buying the hands if you actually plan to use this watch as I do not know how long the 3d printed hands will last or keep the time. The second hands was too small even for the 0.2 mm nozzle.&nbsp;I printed it using a smooth PEI plate, I have not tested it yet on other plates, particularly for hands and back cover which have designs on the bottom surface.&nbsp;Building instructions:I am planning to produce a dedicated video on how to build it, in the meantime the Fusion360 scheme shows more or less where each piece should go.<ol><li>Place the movement in the holder, snap the dial in place over it and insert it into the main case;</li><li>Push in place the back case and force the spacer ring over the dial to secure the movement in place, then add the top ring;</li><li>Attach the wristband pieces using spare filament, the holes have a tight fit so it is best to use some pliers to help pushing the filament through;</li><li>Insert the stem on the movement, pull it into time-set position then screw the crown in from outside the case. (Leave enough play to allow the stem to be pushed in into normal position). Use some super glue here to fix the crown on the stem.</li><li>Set the watch into the time-set position;</li><li>Finally use some precision tweezers to push the hands in place carefully. It is not easy and might require some attempts and patience;</li><li>Turn the crown to check the hands are moving correcly and freely;</li><li>Wear it proudly!</li></ol>

Trolex - the 3D printed working wrist watch

Watch building 

Allar3D

A simple universal quick release wall mount. Can be screwed to the item and wall, or just use double sided tape.&nbsp;Download the Medium-Duty model from here: <a target="_blank" href="https://makerworld.com/en/models/459408#profileId-367627" rel="nofollow noopener">Universal Wall Mount - Medium-Duty</a>Download the Light-Duty model from here: <a target="_blank" href="https://makerworld.com/en/models/464549#profileId-373195" rel="nofollow noopener">Universal Wall Mount - Light-Duty</a>

Universal Wall Mount - Heavy-Duty

Storage solutions

Michal

A compact poop container (S - small version) designed for the Bambu Lab A1 and A1 mini printer. Very easy to attach and remove from the printer.A larger version of the basket is available at this link: <a target="_blank" href="https://makerworld.com/en/models/501368#profileId-416430" rel="nofollow noopener">https://makerworld.com/en/models/501368#profileId-416430</a>&nbsp;UPGRADE 19.06.2024According to your comments, I made the following changes: 1. Yellow arrows - latches have been added to prevent the basket from sliding during vibrations. 2. Red arrow - the shelf on which poop was sticking has been removed. 3. Green arrow - the wall has been raised to further protect the poop from falling out. 4. The height of the basket has been increased by 5mm to increase its volume.5. To make the basket quieter, you can cut a thin sponge and stick it to the bottom from the inside.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451897/design/2024-06-19_7865e4dc0924e.jpg"></figure>

Compact poop bucket S (A1, A1 mini)

A1 mini add ons

IQELIX

IQMouse is back! Re-imagined and better than ever before! It&#39;s more ergonomic, equipped with brand new customizable buttons, and has even more amazing features to offer! Check out our video to learn more!&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=K8qTU_iSi2g"></oembed></figure>

IQMouse V2

PC accessories 

Amateur Prints

This is a token to be used for UK shopping trolly&#39;s. Can be removed from trolly once unlocked