user_3477490415

Zammer 3D

A simple pen holder that can hold up to six pens/pencils! Themed after a barbell rack. Assembly is simple. Slot Weight rack A &amp; B together with some glue. Put the weight plates onto the weight rod. The weight plates can be printed with a layer swap, with AMS or IDEX (easiest), or painted. Slide the nuts on either side of the weight plates and secure with glue. That&#39;s it! Print as many weights as you want :)Inspired by the numerous versions and copies of this on Amazon. I&#39;m not sure what the original is, but I don&#39;t claim full credit for the idea. (Although the actual files are 100% by me.)&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please consider leaving a review, like and boost! And of course remember to share this with your friends! Thanks for the support!</boostcontent></boostme>You can also <a target="_blank" href="https://buymeacoffee.com/zammer3d" rel="nofollow noopener">Buy me a Benchy</a> to get sneak peeks at my future designs!__________________________________________________________________________________________________________&nbsp;This model was designed by Zammer 3D and posted here on MakerWorld.com under the “<a target="_blank" href="http://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons - Attribution—Noncommercial—Share Alike</a>” license. Feel free to print for yourself, but do not sell this model. Remixes are allowed if substantial changes are made and credit is given to Zammer 3D via the built in remix feature. Thank you for respecting the license and supporting me! Happy printing!-Z

Weight Rack Pen/Pencil Holder!

K3DPrint

Wolverines - NCAA Thor&#39;s HammerThis is a Michigan themed Thor&#39;s hammer. It is separated into three plates so that it can be printed easily. I think after many tests and small alterations, I have come up with a really good profile for this. I sacrificed a little bit of time to get a more durable, better quality result that can be handled fairly rough, haha.&nbsp;Credits:@ChaosCoreTech (Original Hammer Designer) - <a target="_blank" href="https://www.thingiverse.com/thing:1311108" rel="nofollow noopener">https://www.thingiverse.com/thing:1311108</a> @Emp3thy (Hammer Remix) - <a target="_blank" href="https://makerworld.com/en/models/44616?from=search#profileId-46284" rel="nofollow noopener">https://makerworld.com/en/models/44616?from=search#profileId-46284</a>@Burnnoticed (Remix /w NFL Branding) - <a target="_blank" href="https://makerworld.com/en/models/166035?from=search#profileId-182300" rel="nofollow noopener">https://makerworld.com/en/models/166035?from=search#profileId-182300</a>@3DHummel (Rock Stand - 75%) - <a target="_blank" href="https://www.printables.com/model/132359-thors-hammer-molnjir-life-size-with-better-handle-" rel="nofollow noopener">https://www.printables.com/model/132359-thors-hammer-molnjir-life-size-with-better-handle-</a>&nbsp;Changes:My remix fixes quite a few issues I had with the original NFL hammers.<ul><li>I was able to get rid of the slight line that ran down the middle when printed.</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392295/design/2024-03-17_1272c464126ee.png"></li><li>No more removing a mess of supports from the inside.</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392295/design/2024-03-17_619b6f81bc59c.png"></li><li>The handle has been changed/re-oriented. This uses a bit more supports, but it provides a clean connection to the bottom of the hammer. I have printed lots of these for friends and family, and we had a few break off at that point. This change seems to end up with a sturdier hammer.</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392295/design/2024-03-17_f7e1b8c6bcb92.png"></li><li>The “top cap” has had the lettering removed. At 75%, the quality suffered, and this just provides a cleaner look, especially with a textured plate.</li><li>I replaced the bottom cap with a different design, that sits flush with the side of the handle. This helps prevent the top pieces from snapping off.</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392295/design/2024-03-17_2b585605f3c8c.png"></li></ul>&nbsp;&nbsp;Upcoming<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000392295/design/2024-03-17_70e70db0372c1.png">Currently in test print. The original model had some uneven areas for the handle to connect. This caused it to not sit flush with the bottom, I have fixed that and will update the model once it is tested.

Michigan Wolverines - Thors Hammer

Shane 

Cincinnati Squirrel

Toggle light switch lock.&nbsp;I frequently turned off the incorrect light and was in need of a straightforward solution.&nbsp;Remove only one screw and install the guard plate against the switch.

Light Switch Lock Guard

dale

Timo

v1 is not easy to install. You need relatively short screws to get it screwed on. That&#39;s why I created V2. This is much easier to attach and also more stable.can be printed without support. I recommend printing it with a brim. I printed it with 4 perimeters and 30% infill.

modern shelf bracket

shelf 

shelby-eleanor

<h2>Description and assembly</h2>The model contains these objects: 5 pots, soil, tree stems and six leaves.Assembly is very easy. No magnets or glue are needed. Soil goes in the pot, stems go in the soil and leaves go on top of the stems.The assembled model has approx dimensions: 20x20x27cm.&nbsp;<h2>About the model</h2>The model is divided into several objects:<ul><li>Plant pot – Dimensions: 65x65x55mm.</li><li>Soil – Contains 3 holes for stems.</li><li>Leaves – There are 6 different leaf designs, all are divided into parts and pre-colored. While printing the leaves there will be 6 color changes. Approx leaf dimensions are: 90x100x2.5mm.</li><li>Stems – There are 3 stem designs. Supports are needed only for the tips of the stems.</li></ul>&nbsp;Colors:I printed stems and leaves in leaf green and white color. The pot is gray and the soil is dark brown.&nbsp;<h2>Print profiles and suggestions</h2>Printing suggestions:<ul><li>Use slightly higher nozzle and bed temperature for the first layer when printing leaves to have fewer gaps between colors</li><li>Print slower for better quality, set initial layer and initial layer infill to 50 mm/s, outer wall, inner wall and top surface to 100 mm/s</li><li>Supports are needed only for the tips of the stems.</li></ul>&nbsp;Suggestions for scarf seams:<ul><li>Use scarf seam for printing the pot. With scarf seam the pot is almost seamless. Use these settings in Quality tab:</li><li>Outer wall width: 0.6mm,</li><li>Scarf joint seam: Contour,</li><li>Conditional scarf joint: on,</li><li>Wall generator: Arachne,</li><li>Wall printing order: Inner/Outer/Inner.</li></ul><h2> Commercial Use</h2>This model is only available for non-commercial use, you can print it for yourself or as a gift for others, but you may not sell or alter the model. If you are interested in obtaining a commercial license please visit my Patreon store: <a target="_blank" href="https://patreon.com/noordinaryleaf" rel="nofollow noopener">https://patreon.com/noordinaryleaf</a>

Monstera adansonii variegated with 6 leaf coasters

jenn 

SASSy Design

A simple design with a very characteristic feature of an inverted hexagonal pattern on its exterior. Print information:<ul><li>Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)</li><li>Prints very good in any filament</li><li>The model is scalable to your liking</li></ul>Happy printing!

Inverted Hexagonal Plant pot Planter - Vase mode

plants pots 

marber

This is a flexible phone case for the Apple iPhone 15 Pro. It optionally supports the addition of an <a target="_blank" href="https://a.co/d/7HGvZoN" rel="nofollow noopener">adhesive metal MagSafe ring</a> in the back pocket, and has a separately printed inlay ring for lens protection.&nbsp;The main case is meant to be printed in flexible TPU (I had great results with Polymaker Polyflex 90A). The lens protection ring works great in PLA.&nbsp;The model is <a target="_blank" href="https://cad.onshape.com/documents/70041709cf11d601cc649319/w/ec826482c19def6071a09e91/e/ebc5cb5a616e3ae7187e86bf?configuration=Hexagon_back%3Dtrue%3BLens_protection_ring%3Dtrue%3BList_DYlRskUA7MicAm%3DMagSafe_pocket%3Bhexagon_size%3D0.006%2Bmeter&renderMode=0&uiState=65a562cc0dcb1913a813b94a" rel="nofollow noopener">publicly available in OnShape</a> (you can also create a free account to modify) with several more configuration options (no hexagon back, or no MagSafe pocket) available for export, or for modifications.&nbsp;I made <a target="_blank" href="https://makerworld.com/en/models/140713#profileId-153305" rel="nofollow noopener">a similar model for the iPhone 13 Mini</a>.

iPhone 15 Pro case (flexible, MagSafe)

phone case 

ian.page38

The only hooks you'll ever consider printing due to their extraordinary versatility and adaptability.Specially designed for the bathroom and shower areas, they are water-resistant, making them perfect for wet environments. Yet, their utility isn't confined to just one room; these hooks are equally efficient in the kitchen for hanging utensils or in the office for organizing supplies. Their flexible nature and strength make them suitable for a wide range of items, bringing convenience and order wherever they're used.3 sizes available to fit all your needs: small, medium and large.<h3>Installation Instructions:</h3><ol><li>Ensure the surface you're applying the hook to is clean and dry for the best adherence.</li><li>Add double sided tape.</li><li>Press the hook against the desired surface, applying pressure for about 30 seconds to secure it in place.</li><li>Wait for the adhesive to set fully — it's recommended to wait at least an hour before hanging items.</li></ol><h3>Print settings:</h3> Use TPU. For optimal performance and to prevent the base of the hooks from bending, it is recommended to print these hooks with a 100% infill setting. This will ensure that the hooks are completely solid, providing maximum stability and support for hanging objects.

The Only Hooks You'll Ever Need: Flexible TPU Hooks for Ultimate Versatility

home 

kriswillcode

8 grams of filament, 20 minutes to print, and no assembly!&nbsp;Update: I added a new profile for a switch with increased tolerances. It&#39;s less “clicky” than the standard version, but should print easier if you&#39;re encountering problems with the toggle fusing to the body. <a target="_blank" href="https://makerworld.com/en/models/467451#profileId-392548" rel="nofollow noopener">Loose - 0.2mm layer, 3 walls, 15% infill</a>&nbsp;Taking inspiration from my <a target="_blank" href="https://makerworld.com/en/models/66672" rel="nofollow noopener">original fidget toggle switch</a>, I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it&#39;s definitely still a work-in-progress), so please report any issues you encounter.<h3>Print Settings</h3><ul><li>Material: PLA (see below)</li><li>Nozzle Size: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Vertical Walls: 3</li><li>Top/Bottom Layers: 5</li><li>Infill: 15%</li><li>Supports: Nope</li></ul>The switch has been tested with several different filaments. All PLA variants tested (standard, matte, CF, silk, and Plus/Pro/Max) worked great, but standard and CF worked best. PETG was also tested, but the switch&#39;s &#34;click&#34; action wasn&#39;t very strong.&nbsp;The model has some areas with limited bed contact, so make sure you have decent bed adhesion. A glue stick or another adhesive is very helpful here.&nbsp;After printing, you&#39;ll need to &#34;break&#34; the toggle from the axle. This requires a small amount of force, but you should be able to accomplish this using only your hands. You&#39;ll also need to flip the switch a few times to fully wear it in and smooth out the action.&nbsp;I designed the tolerances to be fairly loose for a 0.4mm nozzle. If you&#39;re having trouble with the toggle fusing to the axle, lower your extrusion flow ratio by a percentage point or two. I also added a new “loose” variant with increased tolerances, but the action is less “clicky.”&nbsp;If you print one, please post a make! If you encounter any issues, post a comment. Thanks!

Print-in-Place Fidget Toggle Switch

fidget

I am shocked this little guy hasn't made its way onto makerworld yet, plated and ready to print, also attached a version with a small hole in the tail so you can rock the look in style.&nbsp;Depending on how well your filament is tuned you may find the object is a bit tight to loosen up, I have found the bambu scraper a great tool for prying these apart, crack that back :)&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/albionrapture" rel="nofollow noopener">Buy Me A Coffee</a>

The Rock Slug + Keyring

Kenny 

zan.bacak

Complete assembly with optimal print settings at 0.20mm layer height with tuned supports and brims.&nbsp;This upload contains the complete 3mf file from Bambu Studio containing all parts needed for the house with optimal settings applied.‘’The baseplate of the house has been chamfered to reduce the chance of warping.''

Bird House

bird houses 

Meyerhouse

Wedding decor table numbering. Print these beautiful lanterns for table numbering at your celebration. Print the side walls twice and then the cap. I made 1, 2, and 10 but you can easily edit the numbers by right click on the text and click edit and then change it to whatever number you would like or even do Mr. and Mrs. I used tissue paper on the inside by just super glueing it and taking a razer to it to cut the side. Assembly was putting the sides together first, then putting the top on the sides.

Wedding Decor Table Numbers

wedding 

entroisdimensions_figurine

Abra is now available, and you have the choice between different file formats:<ul><li>STL</li><li>3mf for Multicolor Bambu Lab printer</li><li>3mf for Multicolor Prusa printer</li></ul>Video of printing the model: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> For printing, I used PolyTerra PLA filament from Polymaker: 4 colors version:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352298041" rel="nofollow noopener">PolyTerra PLA Savannah Yellow</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574352265273" rel="nofollow noopener">PolyTerra PLA Pastal Banana</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233" rel="nofollow noopener">PolyTerra PLA Charcoal Black</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351577145" rel="nofollow noopener">PolyTerra PLA Earth Brown</a></li></ul>To discover which new models will be released next, follow @polymaker_figurines: <a target="_blank" href="https://www.instagram.com/polymaker_figurines/" rel="nofollow noopener">Instagram</a>, <a target="_blank" href="https://www.tiktok.com/@polymaker_figurines" rel="nofollow noopener">TikTok</a>, <a target="_blank" href="https://www.youtube.com/channel/UCScmlttdRwRbBA61ZGlUVJg" rel="nofollow noopener">YouTube</a> Join the Figurines Community on <a target="_blank" href="https://discord.com/invite/r2ujMfEb7S" rel="nofollow noopener">Discord</a> Happy Printing!-----------------------------------------------Printer settings on the Bambu Lab X1C<ul><li>Rafts: No</li><li>Supports: Yes</li><li>Resolution: 0.2mm</li><li>Infill: 10%</li><li>Filament brand: Polymaker</li><li>Filament color: brown, black, yellow</li><li>Filament material: <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla" rel="nofollow noopener">PolyTerra PLA</a></li></ul>

Abra Multicolor

Pokemon 

Matthew

Somebody in the Laser Engraving and Cutting group on Facebook asked for a file for a similar holder in a photo (see the example photo/screenshot above - it is not mine) and I thought it would make a good gift for some family that have a travel trailer that has dual axles. Should also fit vehicles with tag axles or similar. Much of the constructive discussion was about how different trailers/vehicles/dishes would require different dimensions so I "drew" it up in OpenSCAD so it would be customizable.My router is not big enough to cut the file with the text so I omitted it for the first holder I cut out. Since I don't have a trailer, I put it on the tire of my motorhome (see picture - it works okay but is at an angle) but it's really meant to have a tire on both sides. I got the photo back from my family member who has a trailer so I added photos of it working as intended.The file can generate SVG/DXF for laser/router or STL for 3d printing. You will have to download the file and load it in OpenSCAD to change it to 2d if you want the SVG/DXF (limitation of the online customizer - it won't generate the 2d files).<h3>Print Settings</h3>Printer Brand:MonopricePrinter: <div>Maker Select</div>Rafts:NoSupports: <div>No</div>Resolution:250Category: Sport & Outdoors

Customizable Water Dish Holder - Travel Trailers/RVs - Single or Dual Dish

Oakley 

DaShark

I couldn't find a simple photo booth so i made one and added a Light bar to the top.Has two different sizes: 1) 230x230x245 this one will fit in the Bambu printer. 2) 275x275x250 I printed this one on my Artillery x1Brim for warpinginfill doesn't matter its all walls&nbsp;edit: THIS MODEL REQUIRES 608ZZ BEARINGS!!&nbsp;My apologies i thought i edited this but guess it didn't update the right spot. &nbsp;

Photo Booth

staging 

OMMO

Originally we have created it as a gift for a friend. After we decided also to share it, so we added more designs to it and created some instruction. All is included in files for download, you can choose from many designs. For cool looking worn out effect we have sanded the surface of the money bank kettlebell. Enjoy

KettleBell Money Bank

Fletch

Barrel planters perfect for growing herbs or flowers in. I&#39;m still waiting for my herbs to get ready for transplate and plan on transferring them into these planters once they&#39;re ready in a few weeks. The barrels can be self watering if you add a wicking material to bottom of the insert or you can water them like normal from the top. If used as self watering, keep the water level below the first “metal” band so that only the wicking material makes contact with the water. The barrels are water tight and will not leak any water.&nbsp;SizesSmall<ul><li>52mm (2&#34;) insert diameter</li><li>89mm (3.5&#34;) height</li></ul>Medium<ul><li>76mm (3&#34;) insert diameter</li><li>130mm (5.1&#34;) height</li></ul>Large<ul><li>101mm (4&#34;) insert diameter</li><li>172mm (6.8&#34;) height</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796129/2024-03-31_1fb12d39be3d1.jpg"></figure>

Barrel Planter

garden 

Zodiaus

2x3x5 Gridfinity container for X1C and P1S nozzles. &nbsp;By default it contains a section for each nozzle (0.2, 0.4, 0.6, 0.8) and a slot for a suitible hex key (the one included with the printer does not fit without making it 2x4)&nbsp;There are versions without the Text and Allen Key slot.&nbsp;Bambulab Matte PLA Gray/White/Black used in pictured.&nbsp;Printed at 10% Infil 4 Walls

X1C/P1S-Gridfinity-2x3x5

upgrades to x1c

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3>Introduction</h3></td></tr><tr><td>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed: So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.&nbsp;Thanks, Ben Levi<a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)&nbsp;</td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).<ul><li>Easy installation</li><li>Dual LED strip installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:<figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Printing Time</td><td>70~85 print hours - including color switching!</td></tr><tr><td>Printer</td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td>Filament</td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul>* Feel free to choose your own colors.</td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. Click on the pictures to enlarge.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<h2>Printing settings</h2>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results (click to enlarge):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure>Please note that you will find in also wonderful print profiles from the community too :)<h2> </h2><h2>Assembly instructions</h2>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:<h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3>Please print x2 Button insert.stl files and assemble as the photo below:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg">&nbsp;<h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project. please make sure to choose: “white” and “Strip-USB Button” options.  </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2>Changelog</h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.</li><li>29/06/24 - added BOM items  </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

ams 

Matthew Ghost

🔑Design your own key cover so you always know what the key is for🔑<ul><li>The default dimensions (Key_Diameter = 22.7 mm, Key_Width = 2.7 mm)  are intended for the normalized dimension of the key.</li></ul><figure class="image image_resized" style="width: 22.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497656/design/2024-06-16_dc4b4e4f5304a.png"><figcaption>Normalized dimensions of the key</figcaption></figure><ul><li>In the case of customizing your key cover size (Key Diameter, Key Width), it is always necessary to add clearance e.g. +0.4 mm!</li></ul>&nbsp;

Key cover | Key Caps | Key Tag | Label | Custom

keys 

abactor81

Decorative Wall cubic Shelf.&nbsp;If you like this work, you can support me with a boost! Thanks.&nbsp;You can resize it to your liking in the slicer.

Decorative Cubic Wall Shelf

wall art 

Harry Bruno

I set out to design something that would test the print volume of the X1C, and limited myself to 250mm cubed. I still havent been able to print it at 100%, it maxes out at 97%.&nbsp;The cutout on the corner is defined by the tool, it's to accommodate the exclusion zone, As such, its something of an in-joke, for those in the know…&nbsp;I printed this a while ago, I wanted to use the Bambu silver filament to match the printer, but it wasnt available at the time. Still isn't as of a few days ago.&nbsp;My flush volumes were off, particualrly using white filament, but the silver should be more forgiving. Also, I suffered a power outage while printing this one, around logo level, it lasted a while, enough for the temp in the chamber to drop, so when it restarted it stepped a little. I'll print it again properly sometime. This was an early print too, I'd like to think I've learned a little in the ten months I've been using the printer.

Bambu Trash Can

trash can 

Whopper Printing

This fun model is print-in-place and prints entirely without support and folds together right off the build plate. No assembly!&nbsp;This model is designed to fit small LED tealights inside (but you can change the source of light to anything you want)! Optionally, I've designed an insert that when lit from the back, takes the design to another level!&nbsp;The wheels are locked to the body of the model during printing in order to ensure nothing comes off the print bed during printing, but can be broken free and rotated after printing.&nbsp;If you would like to support me, consider these options:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Haunted Hearse - Print-in-Place Foldable Model

holloween prints 

soarpix

<h2>Custom WILLYS JEEP</h2><ul><li>Complete model kit</li><li>Spinning wheels</li><li>This model does not need any additional non-3dprinted parts</li><li>The design is divided in many different parts in order to allow printing different parts with different colors</li></ul>If you want rim and tire separated you can find it here: <a target="_blank" href="https://makerworld.com/en/models/433445" rel="nofollow noopener">https://makerworld.com/en/models/433445</a>&nbsp;Resolution: 0,2 Supports: Yes Infill: 15% Filament Material: PLA&nbsp;If you have any questions, let me know in the comments or on my youtube channelHAPPY PRINTING!<h2>Click here to wach the video =) <a target="_blank" href="https://youtu.be/eVaXzeeD8cM" rel="nofollow noopener">https://youtu.be/eVaXzeeD8cM</a></h2><h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433442/design/2024-04-18_ega264w78jwu.jpg" alt="image">                <h2>Click here to wach the video =) <a target="_blank" href="https://youtu.be/eVaXzeeD8cM" rel="nofollow noopener">https://youtu.be/eVaXzeeD8cM</a></h2>

WILLYS JEEP - Fully printable

jeep

PrintinPlace

<h2>THE POOP SCREAM</h2>&nbsp;How many times have you screamed in fear after seeing how much your printer pooped? This is the representation of the face of each of us, every time we collect tons of purge.&nbsp;Shopping List:&nbsp;<ul><li>150x100x1 mm acrylic glass</li><li>A little drop of superglue</li></ul>Filament i used:<ul><li>Brown PLA By amazon</li><li>eSun Bones White PLA</li><li>eSun Black PLA</li><li>Creality White Sparkle PLA</li><li>eSun Red PLA</li></ul>The only piece that requires gluing is the character. the rest of the frame is interlocking.&nbsp;Here you can Find the assembly Video:&nbsp;<a target="_blank" href="https://www.tiktok.com/@printinplace/video/7360012546155302176" rel="nofollow noopener">https://www.tiktok.com/@printinplace/video/7360012546155302176</a>&nbsp;I decided not to glue the poops, but you can glue them to prevent them from moving, or you can take a nice resin bath for a more spectacular effect!&nbsp;And That&#39;s it! &nbsp;HAPPY PRINTS

The Poop Scream - Frame Box

tools

BeeTee 3D

LED lamp of the New England Patriots logo.&nbsp;Two back plates are included: one with a hole for hanging on a wall, and one without a hole for placement on a desk or a table.&nbsp;&nbsp;How do I make this thing?!Easy!  Just follow these general steps, and you'll be lighting up your life in no time.  Pay attention, as there will be a quiz later.&nbsp;<ol><li>Download the model to your computer or open it in the Handy app.  I suggest downloading it and opening it so you can remove the purge line (Google is your friend here).  I also strongly suggest using the included profile, as it contains many little tweaks to prevent problems that are common with these types of lamps (gaps, wisps, separation, etc.)</li><li>Confirm whether you have enough AMS's to handle all of the colors.  I do my best to keep my lamps to 4 colors or less, but sometimes that's just not possible, and a second AMS will be needed.  Alternatively, you can build in pauses and conduct manual filament swaps, but you'll need to research how to do that on your own, because I'm not good at that.</li><li>Ensure your filament colors are in the correct AMS slots that corresponds to the model.  Hint: I generally arrange my colors in alphabetical order, because I'm weird like that.  Just be cautious of wildcards like "light blue".</li><li>All of my models come with two different back plates.  One will have a hole for those of you that want to hang the lamp on a wall.  The other will not have a hole, and that's intended for those of you who will be placing the lamp on a desk or a table or a cat.  You do NOT need to print both back plates (or do, I don't care, I'm not your mother).  Pick whichever one you want.  Some lamps will also come with a base.  This is to keep your lamp from tipping over like a drunk toddler if you're placing it on a flat surface.  If you're hanging it on a wall, you don't need the base.</li><li>I strongly recommend using a textured PEI plate, as that will do an excellent job in hiding the print lines, and that's what these prints are tweaked for.  But you can use whatever fancy plate you want -- again, I'm not your mom.  </li><li>Once you've got your AMS set up and are ready to go, hit that big ol' PRINT button for the lamp face and then your back plate. I suggest disabling Flow Calibration.</li><li>Go make a sandwich.</li><li>You should now have the lamp face and your back plate of choice, and it's assembly time!</li><li>This first step is optional, but I would suggest picking up aluminum (or aluminium for some reason if you're British) foil tape.  Yes, it comes in tape form!  Line the inner side of the back plate with the sticky stuff, as it will help tremendously in making your light brighter and with a more even and consistent light.  I personally tear off small strips, apply, and then flatten/smooth it out with the edge of a credit card, and repeat until the entire side is shiny silver.</li><li>Next you're going to want to buy yourself some LEDs.  The options here are many and varied, and I can't decide for you (see mom comment above).  Decide what types of light you want.  Do you want basic white light?  Great!  Do you want cool white or warm white?  Do you want it to flash or dance to the music?  Do you want a switch?  Do you want a remote?  Do you want it to be USB or higher voltage?  Have you changed your mind and want it to be multi-colored or able to change color to the seasons or your mood?<ol><li>What I can do is make some suggestions.  First, there are several kinds of LEDs that are typically used in these types of lamps.  The first is a basic LED strip, which is a roll of circuit board tape with a sticky back-end.  These are the simplest and easiest to use.  Next is what's called a COB strip, which is basically the same, but instead of an LED every inch, it has a solid band of light.  Then there's neon COBs, which are self-explanatory.  There's also LED dome bulbs, which you would apply directly to the backplate, but would require soldering.</li><li>Whatever you choose, you want to look for the following:  - A way to power the thing.  USB, DC, solar panels, steam engine -- doesn't matter, just as long as you can turn it on and off.  - A way to trim the length.  Most LED strips have areas on them that are safe to cut with scissors as long as you cut precisely along the indicated area.  Once you make that cut, the part of the LED strip that's still connected to the power will function, but the remainder will no longer function (there are ways to repower them, but generally require soldering and/or special clips and new controllers.  Google is still your buddy here).  <ol><li>A way to secure the strip to the inside of the lamp.  Most LED strips come with an adhesive side, but not all -- make sure you know what you're buying.  In a pinch, hot glue will do the trick. </li><li>An LED strip length of 1m is usually sufficient, but some lamps do exceed that length.</li><li>Test EVERY strip before you apply it.</li></ol></li></ol></li><li>All of my lamps come with a hole in the side of the case that's just big enough for threading through the LED strip (if you don't want the hole, you can cover it with a small piece of electrical tape).  Thread the USB cable (or whatever power source you chose) from the inside through to the outside so the connecter is dangling just outside the lamp.  Then peel off the sticky backing of the LED strip, and start applying it to the inner wall perimeter of the lamp, maintaining steady pressure to ensure good adhesion.  Try to keep it as straight as possible.  Use a credit card or other narrow instrument to help get it into any nooks and crannies the lamp has.  Continue along the entire inner perimeter until you come back around to the outlet hole, and then make your cut.  Plug in the power to ensure the light still works.<ol><li>This is optional, but I suggest putting a dab of hot glue every inch or so to secure the strip extra tightly to the inside of the case.</li></ol></li><li>Now you're ready to close the lamp up.  Take the back plate you printed earlier and line it up with the front plate.  All of my back plates have a lip to help secure it, and it is a tight friction fit.  This helps keep the two halves together without needing to glue them, which allows you to open it back up in case you need to fix the LEDs.  Once it's lined up, squeeze the two halves together, ONLY PUTTING PRESSURE ON THE OUTER EDGES.  If you squeeze the lamp directly on the thin face or back plate, you'll put your whole hand through it like a gorilla.  <ol><li>Here's the method I use:  I place the edge of the box between the balls of my thumbs, lock the rest of my fingers together above it, and then squeeze.  As long as you're only squeezing on the EDGE, it can take a surprising amount of force.  I repeat this around the entire edge of the lamp until I have a tight fit.  Occasionally, for any tricky areas, a little sanding/trimming/clipping of the lip can be helpful.</li></ol></li><li>Lucky number 13, and you're done! </li></ol>&nbsp;Quiz time (did you think that was a joke?)  1. What's the suggested way of opening the lamp file?  2. What do you need to ensure is in the right order before printing?  3. I'm not your _______?  4. Which back plate should you use for which scenario?  5. What is the recommended plate you should use for lamps?  6. What kind of sandwich did you make?  7. What type of LEDs did you decide on, and what should you do before applying it? 8. What should you NEVER apply pressure to or squeeze when joining the lamp halves together? 9. Did you have fun? &nbsp;Feel free to join me on Patreon @ BeeTee 3D for more, including exclusive lamps!  &nbsp;

New England Patriots LED Lamp

sports

Big Simi

Hello everyone! ✨✨&nbsp;Today I bring you a new type of model never seen before on my page! &nbsp;I made a flexible Rayquaza! 🐉🐉🐉&nbsp;Let me know what you think and if you want me to make other types of legendary pokemon too 😉&nbsp;&nbsp;I hope everyone enjoys this and gives it ⭐⭐⭐⭐⭐&nbsp;&nbsp;&nbsp;🚀 If you like my work, consider giving a boost to this model 🚀&nbsp;&nbsp;My other design:&nbsp;<ul><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/519798" rel="nofollow noopener">Hueforge Pokemon</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/340368" rel="nofollow noopener">Pokemon Model</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/607365" rel="nofollow noopener">Design Model</a></li><li><a target="_blank" href="https://makerworld.com/en/u/2583221243/collections/340360" rel="nofollow noopener">Hueforge</a></li><li><a target="_blank" href="https://makerworld.com/@BigSimi/collections/1301776" rel="nofollow noopener">One Piece</a></li></ul>

Flexi Rayquaza

toys

LemonArts

1967 Shelby Mustang GT 500 Model Kit a model of the legendary Car Easy to Print. Multicolor use glue to assemble <figure class="image image_resized" style="width: 73.8%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_e980d4cba3d34.jpg"></figure><figure class="image image_resized" style="width: 74.28%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_e3fc65b6eabf1.jpg"></figure><figure class="image image_resized" style="width: 74.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_16f9c61e69231.jpg"></figure>

1967 Shelby Mustang GT 500

cars

Eccodyne

Beautiful, stylish box &amp; container&nbsp;This is a beautiful, stylish box &amp; container which adds an extra touch of luxury to any of your rooms. You can store your jewlery or anything else which comes to your mind in this wonderful box.  &nbsp;There are two lids to choose from, one reflects the pattern of the box, the other one has a clean, flat surface.&nbsp;Swap colors in your slicer to your liking. Easy print, no supports needed.&nbsp;Height: ca. 104 mmWidth: ca. 100 mm&nbsp;Enjoy and please let me know what you think!&nbsp;There is also a circular version of this container which you can download <a target="_blank" href="https://makerworld.com/en/models/496803#profileId-411157" rel="nofollow noopener">here</a>:&nbsp;<img class="image_resized" style="width: 57.44%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000487790/design/2024-06-15_e5d03fa5af88e.jpg">&nbsp;If you like stylish boxes &amp; containers, have a look at this design which comes with 12 different lid decors, look <a target="_blank" href="https://makerworld.com/en/models/218027#profileId-236897" rel="nofollow noopener">here</a>:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/218027#profileId-236897" rel="nofollow noopener"><img class="image_resized" style="width: 57.65%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000487790/design/2024-03-02_2a0d201650fbb.jpg"></a> &nbsp;

Beautiful, stylish box & container 

boxes

trixs3D

Model size 214 x 230 x 173 The cat is printed without supports .. supports are required only for eyes that are printed separately. prepainted eyes added in .3MFThe cap size is max 33mm

Cat / bottle holder

tori

Marchenator

baby groot holder for controller or phone

Baby Groot Holder

desk accessories 

elikoll

You have to put the ring inside the head so it fits always perfect.Show me your finished print results.

Baby Groot Hitch Ball Cover Trailer

trailer

Rawsen Mitchell

A simple, modular spice rack with sliding trays for easy access. The model is 10&#34; deep, but I&#39;ve included the SW model in case you need to change the dimensions.&nbsp;

Modular Spice Rack

kitchen 

Think3D

Introducing &#34;Flying Fuck&#34; – a unique piece of art that combines attitude with creativity. This striking model features a middle finger suspended in mid-air, held by string art. &nbsp;Innovative Design: The Flying Fuck features a middle finger floating in mid-air, creating a rebellious visual effect.&nbsp;String Art: The model is supported entirely by strings.&nbsp;Compatibility: Designed to be compatible with the Bambu LED Kid, allowing for additional lighting effects.&nbsp;Dual Print Profiles: Choose from two print profiles – one with a colorful fingernail, and one with the nail and hand in the same color.&nbsp;Decoration: Ideal as a unique decor piece for your home or office, adding a touch of humor and to any space.&nbsp;Bring a touch of creativity to your space with Flying Fuck. Happy Printing

Flying F**k – Suspended Middle Finger Art --V1--

office 

Atelier1996

After i saw this vase on Aliexpress, i found it quit expensive.I&#39;d rather modeled it than buy it. So here we areIt can hold dry flowers or BRICK flowersdidn&#39;t try with real flowers that need water. The hole should hold water&nbsp;Print in multi parts &nbsp;I printed it using bambu filament and polymaker polyterra white&nbsp;pro tip  To snap the gauntlet  tree marks. Put them on the same order you print them.  They are placed based on the gauntlet  Once in place, press hard or use a tool to tap on them to fit. They should fit perfectly. Not need of glue&nbsp;

Mickey Hand Vase

gifts 

DutchWorkX3D

The PIP BOY for the X1C, working great as you can see on my picture. Adjust it, remix it as you wish, this is just a try-out.

gym