Stamos

misosiru

・countersunk screw M2.6 15mm x4 ・Nut M2.6 x4

Raspberry pi 4 Model B case

Raspberry Pi

Sevro

Update:28.03.2024 - I redesigned the lamp a bit. I made it a little thicker, so now it is compatible with 12 mm LED strip and is also stronger.&nbsp;I used to this version LED STRIP from Bambu Lab Store<a target="_blank" href="https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes" rel="nofollow noopener">https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes</a>&nbsp;&nbsp;The diffuser has a larger flange and fits better into the main ring.I enlarged each piece by 110% so it now better takes advantage of bed size of the Bambu Lab printers <figure class="image image_resized" style="width: 68.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_e7c1da1fbecee.jpg"></figure>I created new print profile with this new design and will be develop this project with this size of lamp.If you want use front panels of other designers make sure that is proper size. If it too small just easy enlarge it to 110 % in X and Y axis <figure class="image image_resized" style="width: 44.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_867e2b9fbfc93.png"></figure>&nbsp;02.02.2024 - New front panel added : Deer in the forest05.02.2024 - New front : Birds in love&nbsp;&nbsp;Overview.A Ring Lamp that can be changed to different situations. I designed base with various panels which can adapt to various style and occasion. You can simply change color of it as well as pattern on it, by changing color of diffuser and changing different panels.WARNINGSLed strips can emits some heat depends on what type of led you and voltage you use. In my case temperature of Main Ring achieve 60 °C . Due to this I recommend use filament that can resist that temperature especially for Main Ring. I tested ASA and it works well. Other high temperature filaments should work too (ABS, PETG but I didn&#39;t test it) PLA in this case can bend over time especially if you use heavy panel like budha.So in summary I tested and recommend :Main Ring - ASABase, Diffuser - PLAPanels- PLA or ASAIf you want change panel, always wait to cool down the ring lamp, otherwise PLA cover can bend during take off.Electric parts you need.<ul><li> led stripe - I used: LED COB 8W/1M 12 V, 8mm wide - choose one that can be cut every 2.5 cm</li></ul><figure class="image image_resized" style="width: 430.185px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/6db55f53-37bb-4cbb-ba60-486465aa3c52.webp"></figure><ul><li>dc connector - I used 2.1/5,5 mm , the diameter of the mounting hole is 11.5 mm</li></ul><figure class="image image_resized" style="width: 424.403px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8867176f-a9e4-4554-8087-7b1fd3a6b430.webp"></figure><ul><li>OFF-ON SWITCH</li></ul><figure class="image image_resized" style="width: 424.332px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/5cf1687e-913a-4186-92f2-75d8d2bac909.png"></figure><figure class="image image_resized" style="width: 425.98px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/4ed0768e-9f72-45b5-9dc0-72aa2a703338.png"></figure><ul><li>Charger 12V</li></ul><figure class="image image_resized image-style-align-center" style="width: 434.759px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/1b0daae1-d790-41b4-a6da-4028c899a774.webp"></figure>Printed PartsMain Ring, Base and Panels can be printed in draft mode 0.28-0.30 mm layer height with no issue.Diffuser should be printed with 0.2 mm layer height.<ol><li>After print, glue led strip to inner side of Main Ring</li></ol><figure class="image image_resized" style="width: 539.361px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/55f0a8a9-5b68-4a7a-b60e-def1c0cf337a.webp"></figure>Start from hole on bottom side<figure class="image image_resized image-style-align-center" style="width: 537.429px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8f453fdd-01d6-476e-baaa-f03826eac490.webp"></figure>2. Put Main Ring into base. It should fit tight without glue.<figure class="image image_resized image-style-align-center" style="width: 538.864px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f03a229b-e68e-4835-9d5f-37f66a2677d0.webp"></figure>3. Insert the electric part into the base and connect them by soldering<figure class="image image_resized" style="width: 535.014px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2e73757c-be70-46f0-8fbb-ebc700b2e62a.webp"></figure><figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/75ca1515-ddbf-47b2-ab0d-34d6c3b795b9.webp"></figure>4. Insert Diffuser to Main Ring”. The Main Ring has a groove into which the Diffuser should be inserted and sit steadily. The flat side to the back.<figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/dd5e9b3f-84e4-47dc-8964-6b93b4f6ee46.webp"></figure><figure class="image image_resized" style="width: 527.23px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/3fc14977-a473-4279-b0d1-25f667c08fba.webp"></figure>5. Insert Panel into Main ring. The Panel has cuts at the bottom to avoid cutting the cables<figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f414f9b5-fc71-4e83-af57-faf01b92199e.webp"></figure><figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/d3004065-f61c-4175-b595-6235c7b8ead8.webp"></figure>&nbsp;If you any question or suggestion write to me&nbsp;Have fun

Ring Lamp with replaceable panels

Decor

Makerspace.Online

For this to work you have to download the casing from my <a target="_blank" href="https://makerworld.com/en/models/148536" rel="nofollow noopener">Business card Embosser (LINK!)</a> Paw pattern Rollers for the Business card embosser! (Only rollers, no casing) For all animal and pet lovers! More rollers will be added in the future! Keep an eye on my page or follow <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram!</a> Note: This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product.

PAW pattern - Business Card Embosser Roller

Kocyns

<h3>Basic info:</h3><ul><li>Toroidal propeller launcher with double planetary gearbox.</li><li>Update: Part 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li></ul><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-12-17_c4bb05a73c6fe.gif"></figure><figure class="image image_resized" style="width: 39.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_83uzwi9s2ww6.gif"></figure>&nbsp;Gearbox:<ul><li>Non-printable parts: You just need one type of screws (M3x16 Countersunk screw, DIN 7991) for assembly.</li><li>Gear ratio 1:12 with smooth move.</li></ul><figure class="image image_resized" style="width: 28.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_zynkq0o8slne.gif"></figure><h3>Printing:</h3><ul><li>No supports!</li><li>Layers height are 0,12-0,2mm.</li><li>Recommended material for gears is PETG, see below to BOM.</li></ul><h3>BOM:</h3><figure class="table"><table><thead><tr><th colspan="4">Printed parts/Purchased parts</th></tr><tr><th style="border: 1px solid #000000">Item</th><th style="border: 1px solid #000000">File</th><th style="border: 1px solid #000000">Qty</th><th style="border: 1px solid #000000">Description</th></tr></thead><tbody><tr><td style="text-align: center">1</td><td>1.stl</td><td>8</td><td>PETG</td></tr><tr><td style="text-align: center">2</td><td>2.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">3</td><td>3-Ring-up.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">4</td><td>4-Ring-down.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">5</td><td>5.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">6</td><td>6.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">7</td><td>7.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">8</td><td>8.stl</td><td>1</td><td>PLA (1)</td></tr><tr><td style="text-align: center">9</td><td>9.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">10</td><td>10.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">11</td><td>11.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">12</td><td>12.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">13</td><td>13, 13Low ,13-256</td><td>1</td><td>PETG (2)</td></tr><tr><td style="text-align: center">14</td><td>14.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">15</td><td>Tor_170.stl, Tor_200.stl</td><td>1</td><td>Propeller (3)</td></tr><tr><td style="text-align: center">-</td><td>Tor_base.step</td><td>-</td><td>to create remixes</td></tr><tr><td style="text-align: center">16</td><td>Screw M3x16</td><td>11</td><td>Countersunk screw (DIN 7991)</td></tr></tbody></table></figure><ol><li>Recommended high of layers 0,12mm</li><li>13Low.stl is for printer bed size under 250x210mm. 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li><li>170mm or 200mm toroidal propeller +105mm. Recommended high of layers 0,12mm.</li></ol><h3>Assembly:</h3>STEP 1:<figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_wkmqsgwz6zyl.png"></figure><figure class="image image_resized" style="width: 40.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_lbjrwlyynvsa.png"><figcaption>Note: Screw (red) in detail A shouldn&#39;t be too tight!</figcaption></figure>STEP 2:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_ozf5yzznmp1z.png"></figure>STEP 3:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_oog17ne6f0uq.png"></figure>STEP 4:<figure class="image image_resized" style="width: 39.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_sstcnap2p6qk.png"></figure>STEP 5: Let&#39;s fly!!<figure class="image image_resized" style="width: 40.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_4qb6fj7yq7z3.png"></figure><h3>Commercial uses:</h3>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;&nbsp;Note: By downloading and using the model, you agree that it is provided &#34;as is,&#34; without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.

ToroSpin Turbo - Launcher with planetary gearbox

Toys

wuguigui

<div><h1>Summary</h1><div><h2>06/14/2022 Updated： Upload new version for 3030 profiles. Have a try! Someone said this one might doesn't work, but he tried 4040 25% scaled smaller can fits perfect for 3030.</h2>The same day updated: New parts for 2020 aluminum profile.<h2>If you find it loose when fixing it into the profile, just scale a little in the slicer software.</h2>Sometimes when you want to attach stuff to the aluminum profile, you must disassemble the whole structure. It's really miserable :(Now we have this, just 4 parts can be easily printed without support, just download and follow the diagram pictures and try. You can also use your own parts to replace the "Clip_holder" part.The files uploaded are for "4040" aluminum profile, I will make a new one for "2020" later.Welcome to upload your specific holder parts in remixes. Enjoy! See my other designs at: <a href="/wuguigui/designs" rel="nofollow">https://www.thingiverse.com/wuguigui/designs</a></div><h1>Post-Printing</h1><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=WniC9C6CMLg"><iframe src="//www.youtube.com/embed/WniC9C6CMLg" frameborder="0" allowfullscreen="allowfullscreen"></iframe></div><pre><code> <img src="https://cdn.thingiverse.com/assets/a2/a4/f1/5a/e2/20220511133928-1.jpg"> <img src="https://cdn.thingiverse.com/assets/14/13/87/bb/8a/20220511133921.jpg"> <img src="https://cdn.thingiverse.com/assets/b1/9d/d1/1e/f9/20220511173114.jpg"> <img src="https://cdn.thingiverse.com/assets/9c/43/2a/98/f1/20220511173120.jpg"></code></pre></div>

Profile Clip

3D Printer Accessories

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-19_9f3e533f94456.jpg"></figure>This LED lamp project offers two types of 3D-printed lamps. Type A features a hollowed-out and angular design, while Type B showcases textured and wavy patterns. To achieve the best lighting and shadow effects while maintaining a balance between translucency and light guidance, we have carefully selected suitable LED light sources and recommend using Bambu PLA Basic Jade White filament for this project.&nbsp;Recommended filaments: Bambu PLA Basic Jade White<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683</a>Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-15_31832bf687dbb.png"></figure>

Raspberry Pi

Decor

Fun

Toys

3D Printer Accessories

Household