momu

糯玉米-61

关于AI/AI Mini的AMS lite 密封方案情况说明：<ol><li>该密封方案超出了AI Mini的打印尺寸，Mini不能自救；</li><li>此密封方案只做到了耗材在整个路径上的相对密封，但基本满足日常需求（实测：不开盖的情况下，存放20天湿度由10%升至30%）；</li><li>打印件尺寸较大，整体耗材需求为2kg左右。</li></ol>采购件合计约60RMB：<ol><li>亚克力板--D190X2mmX4；</li><li>圆形强磁铁--D4X3mmX160；</li><li>电缆防水接头--M8(穿线2-4mm)X4;</li><li>土八热熔铜螺母--M2.5X3.5X3.5mmX70;</li><li>硅胶发泡密封条--D3.5mmX5米；</li><li>铁氟龙管--2.5X4mmX1米；</li><li>平头304螺钉--M2.5X8mmX70；</li><li>M2.5六角螺母X10；</li><li>纳米胶带--厚1mm、宽10mm、长度1米；</li><li>密封硅胶--1支；</li><li>502强力胶--1支。</li></ol>干燥剂使用推荐：直径4-6mm分子筛；ams lite入料口保护器推荐：<a target="_blank" href="https://makerworld.com/zh/models/54145#profileId-67822" rel="nofollow noopener">北望神州bambulab a1 mini ams lite入料口保护器 来自 北望神州 - MakerWorld</a>&nbsp;安装步骤参考：<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000427393/design/2024-04-25_dce49fc3a597c.jpg"></figure>

AMS lite 单盘料 密封方案 v2

配件

Titanie

Printing in A1Mini Colored all part to the right colorsColor needed: Black+White+Red+GoldNozzle: 0.4Layer:0.2Support: Someparts needed “Tree Auto”Infill:Gyroid 7%Each Plate Time Around: 2hour to 4Hour+My Print is not finish yet but next week i got time to print Update after

Mercy Halo "Crown" OG OW1 Multicolor 

达文西FPV

拓竹盲盒LED套件001，不需要支撑<figure class="media"><oembed url="https://www.bilibili.com/video/BV1xw411J73k/?vd_source=2089e59f0ea7f6d627e58ab3197c5395"></oembed></figure>

中式《氛围灯》Mood lighting，LED lamp 001

夜灯

koko

可选择零支撑打印 里面可用那个壁纸刀刮一下更加容易安装&nbsp;

原神键盘帽 派蒙 钟离 雷神 神里凌华

键帽

Melted Plastic

Millennium Ring Pendant NecklaceI remixed the original from a user on thinigiverse i have linked. My Remix is of the piece split in half and uses dowels / Glue to Snap together, this ensures a smooth surface on both sides, i previously printed as is from the original and found the backside to always be rough due to needing supports so this is a way to get rid of supports and have a clean finish on both sides. I also went ahead and adjusted the ‘’ Spikes &#34; Remodeled these from scratch to be thicker and not as prone to breaking. Printed in PLA .14 / 4 walls / 35% infill but you are free to play with your settings as needed. .3mf file will have preset settings you can print from and is scaleable as well. :)

配件

cos

夜灯

键帽

戒指