Zhongli without AMS pause for filament change printing

0.12mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 10% infill

0.2mm layer, 2 walls, 15% infill

No AMS (pause to add filament)

Multicolor print version

0.2mm layer, 2 walls, 15% infill

Gundam Base (8mm Magnet)

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.12mm layer, 3 walls, 15% infill

0.12mm layer, 4 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.12mm layer height, 3 walls, supports and orientation are already adjusted, you can print directly, the supports are easy to remove.

0.08mm layer height, 2 walls, 15% infill. Test layer adhesion and filament shrinkage

10CM high, with a ring added to the head for hanging on bags, can be scaled down to make a keychain.

0.2mm layer, 2 walls, 15% infill

Added hanging rings, snap-on eyes can use eye stickers, wings modified to the ground, no need to remove supports, can be printed directly.

0.2mm layer, 2 walls, 15% infill, supports added, with hanging loop, and sticker eyes are possible