Teo5584

Indoor hydroponic greenhouse

Indoor Hydroponic Greenhouse

Third Hand Kit

Alligator Clips Adapter 5mm

Mini Test Clip Hook Grabbers

Base 14cm x 14cm 12holes

Third Hand PCB Workstation

Solder Wire Holder without brass threaded insert

Solder Wire Holder with brass threaded insert

Solder Wire Holder

0.2mm layer, 2 walls, 15% infill

AMS Dry Boxes Silica Gel Rectangular Hygrometer

uhltimate

6-Shot Blaster (Semi-Automatic)

0.16mm layer, 2 walls, 15% infill

Bambu Lab

Bambu Spool

V2 Honeycomb Spool with Filament Starter Slot and Peep Holes

linus3d

Safety Box Cutter/ Box Opener

Two Colors, 0.2mm layer 

D3luxee

TecBears AMS Lite Adaptor 

0.2mm layer, 3 walls, 8% infill

Simba cat

Bambu Lab Refill Spool

AU3D

ESUN Cardboard Spool Adapter

199mm Diameter | Flat | Full AMS Compatibility

LTS.Design

LTS Respooler Motorized Filament Winder

Respooler V3

Excellent model!
I printed the frame in gray ABS and the moving parts in black and white PETG. I adjusted the worm gear pins with a slight offset to fix excess play and thickened the largest gear to prevent flexing under heavy loads.

For the electronics, I designed a PCB with the same dimensions as yours to reuse the case, adding a circuit for a 30x30x10 fan at 24V. (I’m using 28V due to a smaller motor recovered from an old printer :D).

The model works great even after several rewinds.

Chamomile_3D

Simple Calibration Cube V3

Recommended | 0.2mm layer

user_3343625578

Bambu Lab AMS Dry Boxes Desiccant Silica Gel Beads

v1 - 0.2mm layer, 2 walls, 15% infill

Really useful! My AMS humidity level went from 4 to 1 in 2 hours!

flo89

galaxy watch USB-A charger

0.16mm layer, 3 walls, 15% infill

3DPrintWell.co.uk

Google Dino Tea Buddy - Teabag holder

DrJones

pill box to go

0.2mm/0.17mm layer, by object