user_3414895960

Maleko

<h2>The Nozzle Wiper</h2>I designed this nozzle wiper for my X1C. The original wiper isn&#39;t effective and when I got my A1 I saw how great the A1 wiper was so I decided to adapt an A1 wiper to my X1C. This solution cost me less than $1 and now my nozzle is always clean which reduces defects on my prints.&nbsp;I tested this print for 1 week ( &gt; 40h) of printing without a problem.The A1 wiper is available for purchase from the official Bambulab Store at an affordable price.<h4><a target="_blank" href="https://emojipedia.org/warning" rel="nofollow noopener">⚠️</a> Use a material that can handle the heat, like at least PETG.</h4><h4>🚀 <a target="_blank" href="https://makerworld.com/en/models/437463#profileId-342665" rel="nofollow noopener">New version V3 available here</a> 🥳</h4><h3>INSTALLATION:</h3><ol><li>Remove the screw holding the original wiper - Using the larger allen key.</li><li>Install the new wiper using the original screw.</li><li>Cut an A1 silicon wiper in half and install it on top of the new wiper.</li></ol><h3>BENEFITS:</h3><ul><li>No Supports</li><li>No Brims</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Clean nozzle</li></ul>

The Nozzle Wiper - X/P Series

Printer Hardware

dangles_

VERSION 2Changes made to the main design and have been confirmed to be sturdier and easier to get the blade in. Old versions have been removed and print profiles for main model and shorter model have been added. Version 2 also includes a “push stick” in the profile to help safely install the blade. &nbsp;About the ModelCuter that makes cutting those annoying sheets of Christmas gift paper rolls smoother and cleaner. &nbsp;PartsDesign is based around a #11 Hobby Blade. Packs of a lot of these can be found on amazon for very cheap. &nbsp;AssemblyOnce printed and blades have been acquired, you can *carefully* slide a blade into the slot. Using the printed “push stick” to push the blade further in. The lower hole is designed to allow you to use a small screwdriver to pull the blade down into place (as well as take it out).

Wrapping Paper Roll Cutter (VERSION 2)

Stuff

Longracks Labs

Mashup of Dry Pods and Desiccant tray models for using desiccant beads in AMS.&nbsp;v2 in Raw Model download includes update includes:<ul><li>Plate with DryPods (0 degree offset), and trays (same as v1)</li><li>Plate with DryPod at 30 degree offset</li><li>Plate with ‘skinny’ DryPods as needed (with AMS wear preventer, etc.)  </li></ul>Drop a Boost if you are happy with this print!

Printer Hardware

Stuff

Dessicant Trays