user_3408113468

tibubufi

For more fun at work.&nbsp;The wings are from the Asterix helmet made by Djer (thanks for the great work!) <a target="_blank" href="https://www.thingiverse.com/thing:2560811" rel="nofollow noopener">https://www.thingiverse.com/thing:2560811</a>

Wings for the hardhat

stupid Shit

ueda

Adaption of the original 13mm irrigation pegs from IK3Digital to 16mm pipes. I essentially redrew the shape and remodeled the curve at the top to be the same, just for 16mm as I did not want to just scale the whole thing up and waste filament. I also added a 6cm shorter version for grounds where the soil is not penetrable for 21cm. The print profile adds a little strength in infill and walls.

Irrigation Pegs 16mm

Gardening

luke3veritt

This is a button to go in the button hole in the frame of the BambuLab P1P. I have 2 different ways to print it so that people with and without an AMS can print it multicolored.&nbsp;If you HAVE an AMS, select the 'With AMS' print Profile, and print as you would normally. If you DO NOT have an AMS, print the ‘P1P Button Icon’ and when that finishes, print the ‘P1P Button Main’ Without removing the previous print. It will print over the top of it and the 2 prints will turn into 1.&nbsp;<h2>DISCLAIMER:</h2>Quite a few people have mistaken this for a cover for the hole in the top of the printer. This is designed to go on top of an actual button (mounted under the hole) that turns on custom LED strip lights that have been installed. It is meant to be able to fit inside the hole and fall through if there isn't anything underneath it. This is not meant to be a plug for the hole. If you are looking for a plug I have one here: https://makerworld.com/en/models/36958#profileId-35275

Button for Bambu Lab P1P/P1S

P1S Parts

dei.alessandro95

select your rod diameter and print it!for example, if your rod is 20mm diameter choose the “20.stl&#34; file and print itthe right diameter will snap on the rod and it won&#39;t moveplease use petg and not pla!!!!

Safe fishing hook no band/elastic(different sizes)

Stuff Dad Would Like

MaxTee

<a target="_blank" href="https://www.buymeacoffee.com/maxt" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/328354/rich_content/bf7410f2-4e3d-4409-b318-6bc4c2cb3f55/thumbs/cover/800x225/png/bmc-button.webp"></a><a target="_blank" href="https://www.buymeacoffee.com/maxt" rel="nofollow noopener">https://www.buymeacoffee.com/maxt</a>&nbsp;----------------------<h4>2 versions in one package:</h4><ol><li>Without a recycle logo on the side</li><li>With a recycle logo on the side</li></ol><h4> Why should you use this model and not the others?</h4><ul><li>It won't break, ever (as long as you use it for the trash bag rolls)</li><li>The bag roll will never fall out through one of the sides</li><li>The bag roll is very easy to pick up</li><li>Enough extra spacing to fill a 60mm Ø bag roll without a problem, but you can resize the model as you please to fit bigger bag rolls</li><li>Can be used to accommodate any length of the bag rolls by simply spacing the left and right sides out as needed (I suggest adding an extra 0,5cm on each side of the bag roll)</li><li>Can be mounted using double-sided tape or screws</li><li>Because you've just spent a minute reading the reasons why to use this particular trash bag roll holder and not the others. If you're still here, we know you mean business - you need a solution that just works. This holder got you covered!</li></ul> The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 (much more important vs infill percentage!) Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Support Cubic Happy Printing!

Slightly Over Engineered Trash Bag Roll Holder

House Stuff

wuguigui

Updated 20230928I found the first version bent after standing on the table for 1 night, so I enhanced the back structure, I suggest using PLA tough or PLA+ to print the connection parts, the 4 boards using PLA basic are fine. Also when you print the 4 boards part, they have a probability of deformation after cooling from the hotbed, so you'd better to press them with a heavy object after printing.Recommended Filament: Bambu Lab <a target="_blank" href="https://shrsl.com/4duvx" rel="nofollow noopener">PLA Basic</a> or <a target="_blank" href="https://shrsl.com/4duvd" rel="nofollow noopener">PLA Tough</a>____________________________________________________________________________&nbsp;As the new A1 mini has been released, the “Bambu Filment Swatches” in the package of A1 mini Combo look so nice, but I don't like the way they stay together, so I designed a new frame to display them.&nbsp;To make all parts printable in small A1, I spent a whole night figuring out an idea to make it possible, all the parts can be printed without support. The swatch can be taken down easily because of the Inclined base design. You can also choose to mount it on the wall or put it on the table.&nbsp;See the images to get more information. If you like it, please give my design a like, and follow me, I will keep on designing more things.&nbsp;Have fun!<figure class="media"><div data-oembed-url="https://youtu.be/9_ne1zI8iBw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/9_ne1zI8iBw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_c0cfdeb595f03.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_4366a6bcc9301.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-28_ec15465091c93.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-29_e73e5f8ef218f.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-27_cd6b6f84e9f1b.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/423914/2023-09-27_e09c53cd22683.png"></figure>

Bambu Filament Swatches Frame

Test Prints

Daniel

ikea skadis board with spacers and holes for wall mounting

Ikea Skadis board with spacers for A1 Mini 

Game Room Stuff

Musolik

usb-stick holder

PC Stuff

Clyde Frog

This sleek and sturdy trash bin is the perfect solution for keeping your vehicle clutter-free while on the go.&nbsp;It&#39;s compact size ensures it doesn&#39;t take up unnecessary space, yet it&#39;s spacious enough to hold all your wrappers, receipts, and small waste, ensuring your car remains tidy and organized. The bin features a detachable clip mechanism that slides into a channel on the back, allowing for easy installation on the inside of your car door. The bin is also easy to clean, with a removable top for disposal of waste. It is made for hanging on the side of a car door but it can also be used elsewhere due to the detachable clip. Small clip: 13mm Big clip: 18mm Edited 09-04-2024: Added larger sized clip.

Car Trash Bin

Car Stuff

Allar3D

Replica of a well made and proven pocket hole jig. It lets you use it&#39;s super strong hardened sleeves but i&#39;ve also included 3D printable sleeves.&nbsp;I chose this model because it&#39;s well loved pocket hole jig and their sleeves are really long and that minimizes the wobble. Not to mention that they actually sell their sleeves and drill bits seperately.&nbsp;&nbsp;Edit: I&#39;ve included 9.5mm printable sleeve, you can use Kreg drill bit with that.&nbsp;Sleeves and drill bit (9mm) can be had for less than 10$ from <a target="_blank" href="https://vi.aliexpress.com/item/1005005702070963.html?spm=a2g0o.productlist.main.5.42b83qpD3qpDTC&amp;algo_pvid=2f9dc360-3afd-455e-bb97-12282b2ebcbc&amp;algo_exp_id=2f9dc360-3afd-455e-bb97-12282b2ebcbc-" rel="nofollow noopener">Aliexpress</a>&nbsp;To cover up the pocket holes, you can download the file from here: <a target="_blank" href="https://makerworld.com/en/models/413376#profileId-315376" rel="nofollow noopener">Pocket Hole Plug </a>&nbsp;&nbsp;Print settings:Layer height: 0.12 - 0.20Walls: 3 or more.Infill: 15% or more.Brim: Not needed if you have good bed adhesion.Supports: Up to your judgement.I&#39;ve oriented the file the way it&#39;s supposed to be printed, but feel free to change whatever you think might suit better.&nbsp;&nbsp;&nbsp;

Ultimate Pocket Hole Jig

Tools

P1S BSMT

Storage Slots to be mounted under shelf. Allows storage for multiple Types of Wrap, Foil and Paper used for cooking and food storage. Split into 2 files. &nbsp;2 Slots fits cling wrap boxes 3 Slots is slightly smaller and fights wax paper and parchment paper boxes&nbsp;Mine holds Cling Wrap, Wax Paper, Parchment Paper and Foil

Kitchen Storage for Cling Wrap and Foil

Kitchen Stuff

Never Disarm

Revolutionize your nail care routine with our Nail Kit Organizer – now with dedicated space for up to 21 of your favorite nail polishes! Unleash the power of perfect organization as you keep your nail essentials and a stunning polish collection in one stylish hub. &nbsp;This sleek design ensures your nail clippers, files, and brushes have their designated spots, while the spacious polish compartment lets you showcase and easily access up to 21 of your go-to shades. Elevate your beauty station with this Nail Kit Organizer – where style meets functionality in perfect harmony!&nbsp;Print hassle-free with our Nail Kit Organizer 3D file! No supports needed, and it's a breeze to print in PLA.&nbsp;The Nail Kit Organizer 3D file requires no additional hardware – just two M3 x 8 mm screws are all you need to secure the drawer handles. Keep it easy, keep it efficient. Print, assemble with minimal effort, and enjoy a clutter-free nail care routine. Elevate your organization game effortlessly with a touch of style, because sometimes, less hardware means more convenience!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/317254/2023-12-27_386c01fbc2be2.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/317254/2023-12-27_557e557797bb5.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/317254/2023-12-27_6a94ee0f0d183.jpeg"></figure>&nbsp;

Nail Art Kit Organizer

Stuff For Susan

K2_Kevin

DONT FORGET: <a target="_blank" href="https://makerworld.com/en/models/142513" rel="nofollow noopener">Download the Pro Streamer Essentials Bundle.</a>&nbsp;<h2>The &#34;Pro Streamer&#34; for Stream Deck XL</h2>System to keep your control panel in order! Each holder works with various components (Stream Decks, Phone holder, or other designed accessories) that set into place using Gridfinity!<h4>Instructions:</h4><ul><li>Print the holders for your Stream Deck(s)</li><li>Download the Pro Streamer Essentials files that include the Interface Plates, Dowels and Gridfinity Baseplates.</li><li>Interface Plate(s) - slide your Stream Deck Holder in place (Designed to be VERY tight, but pops off easily from the back)</li><li>Gridfinity Baseplates</li></ul>&nbsp;NOTE: Think ahead... how do you want to fit together your control panel. Overlapping Interface plates help keep multiple holders together. Im still working on more interface plate sizes/designs. I use 3x5, 3x6 Minimal Baseplates for my Control Panel.&nbsp;I&#39;ve tried to design each additional holder to fit Interface Plates and Gridfinity Baseplates.This is a project, and you can choose your own adventure based on your needs! Remix and design your own panels using any of these designs. I included a BLANK Holder in another download you can scale to fill gaps or modify to suit you needs.&nbsp;Hard to install plates?  If you find the Interface Plates are difficult to slide on, no problem, feel free to use a hammer.  Some may slide on nice and easy, while others need a little convincing.&nbsp;The Pro Streamer Control Panel is Inspired by flight sim cockpit design by mhwlng on printables. The Stream Deck +/XL design has been designed to fit snug on Interface plates and sized to fit gridfinity baseplates together.

Pro Streamer XL Control Panel

Stream Stuff

DocLex

English version below (machine translated)&nbsp;Dispenser für ca 12 Visitenkarte (85x55mm), je nach Dicke des Papier. Andere Grössen auf Anfrage. Wenn die Karten aneinander kleben kann das verbesserte Design helfen.Ein-Teil-Druck. Kein Zusammenbau, kein Support.Gedruckt mit Bambu Lab PETG-CF, standard Einstellungen. Sieht echt spitze aus. Aber auch andere Materialien sind möglich. (Layerhaftung muss OK sein).&nbsp;Dispenser for approx. 12 business cards (85x55mm), depending on the thickness of the paper. Other sizes on request. If the cards stick together, the improved design can help.One-piece printing. No assembly, no support.Printed with Bambu Lab PETG-CF, standard settings. Looks really great. But other materials are also possible. (Layer adhesion must be OK).&nbsp;For 91x55 cards:<a target="_blank" href="https://makerworld.com/en/models/249875#profileId-266151" rel="nofollow noopener">https://makerworld.com/en/models/249875#profileId-266151</a>&nbsp;

Business Card Box // Visitenkartenbox 85x55

Work Stuff

3D Print Bros

V2 of the Gyro Fidget Spinner is here! Please use the print profile for best results. Bambu Labs Basic PLA gives me the best results, but most PLAs should work just fine. My prints got spinning right away, but if your rings don&#39;t spin freely, first try breaking it in a little. If it doesn&#39;t break in within a few minutes, re-print it with reduced flow ratio or perform flow calibration. Results will vary depending on filament used.&nbsp;Improvements include:<ul><li>Relocated Z seams</li><li>Optimized tolerances</li><li>Longer spin times</li><li>Quieter smoother spinning</li><li>Faster print time</li></ul><a target="_blank" href="https://cults3d.com/en/3d-model/game/gyro-fidget-spinner-v2" rel="nofollow noopener">Commercial selling license now available!!</a>&nbsp;Check out the JUMBO version <a target="_blank" href="https://makerworld.com/en/models/393051#profileId-294200" rel="nofollow noopener">here</a>! Or if you&#39;re more a miniature person, I have you covered with the <a target="_blank" href="https://makerworld.com/en/models/435704#profileId-340795" rel="nofollow noopener">Micro</a>.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000245471/design/2024-04-19_89ff840145366.gif"><figcaption><a target="_blank" href="https://makerworld.com/en/models/393051#profileId-294200" rel="nofollow noopener">JUMBO Gyro</a></figcaption></figure><figure class="image image_resized" style="width:43.04%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000245471/design/2024-04-19_4d5bdcba3287d.gif"><figcaption><a target="_blank" href="https://makerworld.com/en/models/435704#profileId-340795" rel="nofollow noopener">Micro Gyro</a></figcaption></figure>&nbsp;

Gyro Fidget Spinner V2

Toys

jayz5jz

Designed this Apple Watch Stand that allows each part to be printed in any color and then put together to complete the stand. Minimal to no glue is required, I did personally add one spot of super glue to keep the top side tab of the ‘Mid’ piece in place.&nbsp;In my home / office I have came across 3 difference charging cables that have slightly different dimensions, so I have made a ‘Charge’ face for each one. Simply measure your charging cable to determine which one to print.&nbsp;Construction:<ul><li>Assemble the ‘Charge’ face with your charging cable. Start by sliding the USB-A / USB-C end through the ‘Charge’ face. Secure the cable side in the ‘Charge’ face and then push the opposite side of the charger in. Pull the cable through the ‘Stand’ from the top and snap the ‘Charge’ face into place.</li><li>Add the ‘Mid’ piece by sliding it into the ‘Stand’. Secure / align the lower side tabs and then align the top side tabs.<ul><li>NOTE: I added one little spot of glue to the longer tab to help keep the top side tabs secure.</li></ul></li><li>Add any extra cable inside the ‘Stand’ before snapping the ‘Bottom’ face into place.<ul><li>NOTE: I added some non-slip rubber pieces to prevent any sliding.</li></ul></li></ul>&nbsp;

Apple Watch Stand / Dock / Charger

Apple Stuff

V3T3D Designs

Options! Everyone loves a bit of options. There is no bigger truth to that when it comes to filament options. One problem when it comes to the AMS Lite… Not all spools work. This is where the gap filler comes in. Now granted it says Sunlu in the title, however, this would work with just about any spool that the hole is 73mm+.&nbsp;And yes before you say it, I already know there are several other…, there's that word again, OPTIONS available on the market and that's OK. This one is special, at least I think so, because it is threaded. Making it easy to switch between spools when needed and the spool doesn't have to spin around it degrading the part.&nbsp;Instructions for use: Holes Out! Because of the constant back and forth of the AMS, it can unscrew the inner portion(The side with the finger holes) if that part is on the inside of the spool holder where the grippers are.&nbsp;No supports needed&nbsp;As always let me know questions or issues and enjoy. Share it around!

Sunlu Spool AMS Lite Gap Filler

Printer Parts

mikolaj.mazik

I'm a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;This time I decided to make a wheel loader model. Modeling took me about two days, another two days to print individual parts.Arm works identically to the real loader, the wheels rotate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/577860/2024-02-18_0e01c095c5424.png"></figure>

Catherpillar 930M Front Loader

Construction

All Things STL

NEW NEW!! SCREW WALL!! See videos for description… Click the link below to check it out…&nbsp;All the other files in this collection are for the Honeycomb Wall that I no longer use.&nbsp;<a target="_blank" href="https://www.printables.com/model/544779-screw-wall" rel="nofollow noopener">https://www.printables.com/model/544779-screw-wall</a>&nbsp;Some of the files require support but just the ones with the middle hex connections.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/c2PZH-eX0i0?si=g3pNL-yLpcjtgSpo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/c2PZH-eX0i0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/OImDS4lT7Kc?si=Fp0P3wua8jDUfklq"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OImDS4lT7Kc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/R5rCSqXRi7Q?si=FggY1tEdJ6Q9rlLi"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/R5rCSqXRi7Q" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;&nbsp;&nbsp;

HoneyComb Storage Wall remixes & Screw Wall

Honeycomb

3DMN

If you appreciate my work, give it a like, and if you love it, consider buying me a coffee to show your support! <a target="_blank" href="https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG" rel="nofollow noopener">https://www.paypal.com/donate?hosted_button_id=BC7SWTMZG92TG</a> &nbsp;Step into the enchanting world of Westeros with our meticulously crafted 3D-printed Winterfell from Game of Thrones. Immerse yourself in the intricate details of this iconic castle, meticulously replicated with precision. The Z 214 Y206 Z51 model captures Winterfell's grandeur.&nbsp;This Winterfell model is a true testament to the fusion of art and technology. Display it proudly as a centerpiece in your home or office, and let the spirit of the North resonate through its walls. Whether you're a devoted Game of Thrones fan or an aficionado of intricate craftsmanship, this 3D-printed Winterfell is a must-have collectible.&nbsp;Embrace the magic of Westeros and bring Winterfell to life in your own space. Claim your piece of the Seven Kingdoms!"

Game of Thrones Winterfell Castle

Game of Thrones

PolyMesh

Original design by Poho on ThingiverseAn easy way of transporting up to 7 whisky samples. The lid screws on and holds the bottles in place. Good for 30ml bottles of approx 33mm in diameter and 83mm tall.Created from the ground up, but design was inspired by <a target="_blank" href="https://www.thingiverse.com/thing:4573555" rel="nofollow noopener">https://www.thingiverse.com/thing:4573555</a>.Once printed, a little lithium grease on the thread ensures smooth operation.&nbsp;

Whisky Sample Holder V2

Bourbon

Gage's Gallery

Taylor Swift Reputation Album Cover Lithopane

T Swizzle

Arjen

Introducing the Mini Desktop Trash Can, your compact solution to maintaining a clutter-free and organized workspace. This sleek and stylish accessory is designed to fit seamlessly into any desktop environment, providing a convenient and hygienic way to dispose of small waste items.&nbsp;Crafted with precision using advanced 3D printing technology, this mini trash can combines functionality with aesthetics. Its compact size makes it ideal for placement on desks, countertops, or any other small surface area where space is limited.&nbsp;Despite its small footprint, the Mini Desktop Trash Can boasts ample capacity to accommodate various types of waste, such as paper scraps, pencil shavings, or discarded stationery items. The removable lid ensures easy access for disposal while effectively concealing unsightly trash from view.&nbsp;Constructed from durable and eco-friendly materials, this trash can is not only practical but also environmentally conscious. Its sturdy build ensures long-lasting use, making it a reliable companion for keeping your workspace neat and tidy for years to come.&nbsp;Whether you&#39;re working in a home office, cubicle, or dorm room, the Mini Desktop Trash Can is the perfect accessory to streamline your workflow and enhance productivity. Say goodbye to clutter and hello to a cleaner, more organized workspace with this essential desktop companion.

Mini Desktop Trash Can

Desk Stuff

E.T.

<h2>Airless Ping Ball 3.0!</h2>&nbsp;New mesh, new strength.&nbsp;Prints with a 3 layer raft for ease of adhesion and easy support removal!&nbsp;While this ball is a little heavy for table tennis, it DOES work (slams not guaranteed). Other uses include: Works as a fantastic cat toy if you toss a bell in at 60% print completion (or by itself).&nbsp;If you wish to sell this commercially, look <a target="_blank" href="https://cults3d.com/en/3d-model/game/airless-ping-pong-ball-3-0" rel="nofollow noopener">here</a>&nbsp;Thanks!

Airless Ping Pong Ball 3.0

Airless

WIZZY

Glock 17 with movable parts (Trigger,Magazine)on the spring part the support is a little bit tricky to remove check out my other models too