user_3396563769

LoFi Layers

<h3>Description</h3>This 3D print features an artistic interpretation of Tinkerbell, with a striking splash of green. Perfect for fans of classic tales and unique art styles, this piece adds a captivating focal point to any collection.&nbsp;Print Details:Dimensions: 199x199mmMaterial: PLA Elegoo Basic Black, PLA Elegoo Basic Gray, PLA BambuLab Basic Jade White, PLA BambuLab Basic GreenPrint Settings: Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mmMin Depth: 0.48mmMax Depth: 2.2mmActual Depth: 2.2mmFilaments Used:PLA Elegoo Basic Black: Transmission Distance: 0.6PLA Elegoo Basic Gray: Transmission Distance: 2PLA BambuLab Basic Jade White: Transmission Distance: 5PLA BambuLab Basic Green: Transmission Distance: 2This print uses 4 unique filaments.Swap Instructions:Start with BlackAt layer #6 (0.56mm) swap to Jade White At layer #7 (0.64mm) swap to Gray At layer #8 (0.72mm) swap to Jade White At layer #22 (1.84mm) swap to BambuLab Green for the rest.

Tinkerbell Hueforge

Litophane

giuliolibrando

A mini filament clip. Easy to print, easy to use.&nbsp;&nbsp;

Filament Clip Mini

Tools

Sevro

OverviewThis is a boat model inspired by the TV series &#34;Thunder in Paradise&#34; from the 1994.It implements the Boat Model Components Kit 010It is great toy for pools.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000485141/design/2024-06-03_c8db7551d7f93.jpg"></figure>WarningDon&#39;t use brittle, old filament. Boat will be brittle too as it is hollow inside.&nbsp;Printing and assemblyTo obtain the best quality and simplicity of printing, I designed this model to be printed vertically with 0% infill.The engine is located inside the boat. Just put it inside. It holds firmly and is easy to insert and remove. This solution provides good balance and good looks, but does not allow for control. That&#39;s why I added the rudder. The rudder fits snugly into a hole under the boat and allows you to steer the boat. &nbsp;Additionally, I added the name &#34;Thunder&#34; to it as a separate part. If you want to give this boat a better look, simply print the name and stick it in the appropriate place on the side of the boat. Use superglue (Cyanoacrylate glue)For a better presentation of this model, I also designed a stand for the entire model.&nbsp;Three sizes.This model has three sizes. Big, medium and mini. You can choose which you want.Big version utilize capability of CarbonX1 in Z axis and is most majestic.Medium version is 10 % smaller than the Big one and is a little faster. Addicionaly in print profile there are two versions of hull (normal with flat bottom and full hull)Mini version is 23 % smaller than the Big one and is for small printers like A1 Mini.&nbsp;Have Fun&nbsp;&nbsp;&nbsp;&nbsp;

Litophane

Tools

Toys&Figures