Deamon Corpse

Willi 3D

Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo insert allen keys. This can hold the allen keys that come with the Bambu printer. The insert has space for screws that can be stored in it when dismantling.<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/141868/2023-11-03_1bwt6vr48vgo.jpg"></figure>BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>&nbsp;Printing:Layer height: 0.2Supports: NoBrim: NoMaterial: all&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!

[BaBo] insert allen keys 5x1

X1C Mods

TT-Products

--------------ENGLISH----------------&nbsp;Update June 27, 2024:<ul><li>Magnet variants expanded (D=4mm, D=5mm, D=6mm)<ul><li>Depending on the size, choose the appropriate model, e.g. spindle 4mm &amp; magnet holder 4mm</li></ul></li></ul>&nbsp;<img class="image_resized" style="width: 45.51%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-23_75554b6e9754a.jpg"><h2>AMS spool helper explanation:</h2>This design is intended to prevent the typical jamming of a spool in the AMS. The system was designed primarily for Bambu Lab spools, which is why system compatibility should be taken into account for spools from other manufacturers (see System Compatibility &amp; Adapters below).After many hours of printing with a wide variety of spools from different manufacturers, I have had the least problems with the original Bambu Lab spools. But here too, with spools that typically empty quickly, I had the problem that the spools tipped forward and jammed.Not only the resulting disruption, but also the enormous wear and tear on the AMS really bothered me. In my opinion, countless mods from Makerworld, Printables and others have not solved the problems.&nbsp;&nbsp;For this reason, I decided to counteract the basic problem. Since the spools ALWAYS tip forward, I thought about simply preventing this. For this reason, the design was created using a spindle that has ball bearings. The spindle prevents the spool from tipping forward. The spindle is also supported so that the spool does not jam on the spindle.&nbsp;→ Version without bearing also available → “bearing connector” changed to “bearing alternative”&nbsp;Side view with spool:<img class="image_resized" style="width: 45.26%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_dd7839f6a6b22.jpg">&nbsp;Without AMS spool helper: (Gif)<img class="image_resized" style="width: 45.16%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_8fc8207fb280f.gif">With AMS spool helper: (Gif)<img class="image_resized" style="width: 45.37%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_3957bbf4e2794.gif"> To make the system even more comfortable to use, I decided to use 2 separate spindles that are inserted from the outside and are held in place magnetically.This means that spools can be easily removed from the spindle and reinserted into the AMS without much effort.&nbsp;<img class="image_resized" style="width: 45.23%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_1e7b1b135e21c.gif">&nbsp;The system is designed to be easy to print. The base bodies can all be printed on one print plate (print plate 1). The second print plate (spindle) must be printed twice. I recommend printing from PETG as this is less likely to break. → The spindles can also be made from steel. All you need is a rod with a diameter of 8mm and a length of approx. 167.5mm (2 for an AMS).&nbsp;&nbsp;<h3>The system requires:</h3>-Standard bearings with an outer diameter of 22.0mm and an inner diameter of 8.0mm. The thickness should be 7.0mm (There is also a version without bearings → this also prevents the spool from jumping, but the version with bearings works better)-3 magnets with a diameter of 4,0mm, 5.0mm or 6,0mm and a thickness of 2.0mm (can also be used without → less convenient when inserting the spindle)-Glue to glue the bearing cover into the bearing connector when the bearing has been inserted<img class="image_resized" style="width: 23.14%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-23_b97a1546d21f5.jpg"><img class="image_resized" style="width: 22.25%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-23_f54efc1b8a83c.jpg">After mounting the magnet in the magnetic holder, as well as the bearing and bearing connector (magnet in the bearing is only needed once)<img class="image_resized" style="width: 23.52%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_2a4f807f20a85.jpg"><img class="image_resized" style="width: 21.96%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_21e28a5a95cb5.jpg">&nbsp;&nbsp;<h3>Printing recommendation:</h3>I recommend printing with the preset settings. In these, suitable parameters (outer contours and inner contours) have already been set, which adjusts the dimensional accuracy.&nbsp;&nbsp;<h3>Assembly:</h3><ol><li>The base body is simply inserted into the spokes of the AMS. A locking system holds the base body firmly in the AMS.</li><li>The bearing must now be pressed into the bearing connector</li><li>The bearing cover is now glued to the outer diameter over the bearing into the bearing connector with a little glue (plastic glue)</li><li>The magnet must now be pressed into the magnetic holder. → Pliers or a vice are recommended. It was deliberately designed so that it is difficult to press in so that it does not come loose.</li><li>The magnetic holder with the pressed-in magnet is now pressed into a bearing connector in the middle of the bearing. - Here too, it should be difficult to press in so that it does not come loose.</li><li>The bearing connector must be sanded at the support structure points after printing (smooth surface) and then inserted into the base body. The bearing connector with the magnet must be inserted into the middle base body.</li><li>Insert or glue the 2 magnets into the recess in the spindle. ATTENTION! Insert the magnets so that the poles attract each other and do not repel each other!</li><li>Insert the spools and insert the spindles from the outside! Done!</li></ol>&nbsp;&nbsp;<h3>Information on system compatibility &amp; adapters:</h3>-The system was designed for Bambu Lab spools-Spools with an inner diameter that is too small can only be used without the spindle-Spools wider than the original Bambu Lab spool (68-70mm) are not recommended, as the spools are otherwise too wide.-Spools with a larger inner diameter can be used without any problems, e.g. Geeetech / Giantarm spools. However, an adapter (adjusted diameter) is then pushed over the spindle. → Adapters can be designed yourself and uploaded here. → Important: Diameter must be larger than 8.0mm of the spindle and a maximum of 70mm wide.&nbsp;&nbsp;Known suitable spools without adapter:-Eryone spools with outer diameter 200mm &amp; inner diameter 55mm&nbsp;Known suitable spools with adapter:-Giantarm spools with outer diameter 195mm &amp; inner diameter 75mm → insert adapter over spindle-Geeetech spools with outer diameter 195mm &amp; inner diameter 75mm → insert adapter over spindle&nbsp;Example outer AMS positions → Slide adapter over spindle and insert<img class="image_resized" style="width: 38.33%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_5d59c33203837.jpg"><img class="image_resized" style="width: 38.36%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_5e49a3eecc63e.jpg">Example inner AMS places → press the spools slightly to the side and hold the adapter to the bearing. Then insert the spindle from the outside<img class="image_resized" style="width: 38.51%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_ee872c78612bb.jpg"><img class="image_resized" style="width: 38.47%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_0f040efe596a3.jpg">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;--------------DEUTSCH----------------&nbsp;Update 27.06.2024:<ul><li>Magnet Varianten erweitert (D=4mm, D=5mm, D=6mm)<ul><li>Je nach Größe das passende Modell wählen z.B. spindle 4mm &amp; magnet holder 4mm</li></ul></li></ul>&nbsp;<img class="image_resized" style="width: 45.26%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-23_75554b6e9754a.jpg">&nbsp;<h2>AMS spool helper Erklärung:</h2>Diese Konstruktion soll das typische verklemmen einer Spule im AMS verhindern. Das System wurde hauptsächlich für Bambu Lab Spulen designt, weshalb für Spulen anderer Hersteller die Systemkompatibilität beachtet werden sollte (siehe unten Systemkompatibilität &amp; Adapter).Nach vielen Druckstunden mit verschiedensten Spulen unterschiedlichster Hersteller hatte ich bisher mit den Originalen Bambu Lab Spulen am wenigsten Probleme. Aber auch hier hatte ich bei typischerweise fast leeren Spulen das Problem, dass die Spulen nach vorne Kippen und sich dadurch verklemmen.Nicht nur die dadurch auftretende Störung, sondern auch der enorm hohe Verschließ auf das AMS hatte mich sehr gestört. Unzählige Mods aus Makerworld, Printables und weitere haben die Probleme meiner Ansicht nach nicht behoben. &nbsp; Aus diesem Grund entschied ich mich dem grundsätzlichen Problem entgegenzuwirken. Da die Spulen IMMER nach vorne Kippen, hatte ich mir überlegt dies einfach zu verhindern. Aus diesem Grund entstand hier die Konstruktion mittels Spindel, welche Kugelgelagert ist. Durch die Spindel wird verhindert, dass die Spule nach vorne kippt. Damit die Spule nicht an der Spindel verklemmt, ist die Spindel zusätzlich gelagert.&nbsp;→ Version ohne Lager ebenfalls erhältlich → “bearing connector” geändert zu “bearing alternative” angepasst&nbsp;Seitenansicht mit Spule:<img class="image_resized" style="width: 45.07%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_dd7839f6a6b22.jpg">&nbsp;Ohne AMS spool helper: (Gif)<img class="image_resized" style="width: 45.23%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_b88baa547509d.gif">Mit AMS spool helper: (Gif)<img class="image_resized" style="width: 45%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_c4059c4357dbe.gif"> Damit das System noch komfortabel zu bedienen ist, entschied ich mich über 2 getrennte Spindeln, welche von außen eingesetzt werden und magnetisch halten. Dadurch können Spulen einfach nach dem entnehmen der Spindel entnommen und wieder ins AMS eingesetzt werden ohne großen Aufwand.&nbsp;<img class="image_resized" style="width: 45.23%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_1e7b1b135e21c.gif">&nbsp;&nbsp;Das System ist so konstruiert, dass es einfach zu drucken ist. Die Grundkörper können alle auf einer Druckplatte gedruckt werden (Druckplatte 1). Die zweite Druckplatte (Spindel) muss 2x gedruckt werden. Ich empfehle hier den Druck aus PETG, da dies weniger zu brechen neigt. → Die Spindeln können aber ebenfalls aus Stahl eingesetzt werden. Hier wird lediglich eine Stange mit Durchmesser 8mm und einer Länge von ca. 167,5mm benötigt (2 für ein AMS).&nbsp;&nbsp;<h3>Benötigt für das System werden:</h3>-Standard Lager mit einem Außendurchmesser von 22,0mm und einem Innendurchmesser von 8,0mm. Die Dicke sollte 7,0mm betragen (Gibt auch eine Variante ohne Lager → das Springen der Spule wird damit auch verhindert, jedoch funktioniert die Variante mit Lager besser)-3 Magnete Durchmesser 4,0, 5,0mm oder 6,0mm und einer Dicke von 2,0mm (Kann auch ohne benutzt werden → weniger Komfort beim einsetzen der Spindel)-Kleber um das bearing cover in den bearing connector zu kleben, wenn das Lager eingesetzt wurde<img class="image_resized" style="width: 23.14%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-23_b97a1546d21f5.jpg"><img class="image_resized" style="width: 22.25%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-23_f54efc1b8a83c.jpg">Nach Montage des Magneten in den magnetic holder, sowie das Lager und bearing connector (Magnet im Lager wird nur 1x genötigt) <img class="image_resized" style="width: 23.52%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_2a4f807f20a85.jpg"><img class="image_resized" style="width: 21.96%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_21e28a5a95cb5.jpg">&nbsp;&nbsp;<h3>Empfehlung Druck:</h3>Ich empfehle den Druck mit den voreingestellten Einstellungen vorzunehmen. In diesen wurden passende Parameter (Außenkonturen und Innenkonturen) bereits vorgenommen, welche die Maßhaltigkeit anpasst.&nbsp;&nbsp;<h3>Montage:</h3><ol><li>Der Grundkörper (base body) wird einfach in die Speichen der AMS eingesteckt. Ein Einrastsystem hält den Grundkörper fest im AMS.</li><li>Das Lager muss nun in den bearing connector eingepresst werden</li><li>Das bearing cover wird nun an dem Außendurchmesser mit ein wenig Klebstoff über das Lager in den bearing connector eingeklebt (Kunststoff-Kleber)</li><li>In den magnetic holder muss nun der Magnet eingepresst werden. → Wird eine Zange oder Schraubstock empfohlen. Wurde bewusst so designt, dass es schwer einzupressen ist, damit es sich nicht mehr löst.</li><li>Der magnetic holder mit dem eingepressten Magnet wird nun in einen bearing connector mittig im Lager eingepresst. - Auch hier sollte es sich nur schwer einpressen, damit es sich nicht mehr löst.</li><li>Der bearing connector muss nach dem Drucken an den Stützstruktur-Stellen angeschliffen werden (Glatte Oberfläche) und anschließend in den Grundkörper (base body) eingeschoben werden. Der bearing connector mit dem Magnet muss in den mittleren Grundkörper (base body) eingesetzt werden.</li><li>Die 2 Magnete noch in die Aussparung der Spindel einsetzten bzw. einkleben. ACHTUNG! Magnetete so einsetzten, dass Pole sich anziehen und nicht abstoßen!</li><li>Spulen einsetzen und die Spindeln von außen einsetzen! Fertig!</li></ol>&nbsp;&nbsp;<h3>Infos Systemkompatibilität &amp; Adapter:</h3>-Das System wurde für Bambu Lab Spulen designt -Spulen mit einem zu kleinem Innendurchmesser können nur ohne die Spindel eingesetzt werden-Spulen breiter wie die Originalen Bambu Lab Spulen (68-70mm) werden nicht empfohlen, da die Spulen sonst zu breit sind.-Spulen mit einem größeren Innendurchmesser können ohne Probleme eingesetzt werden z.B. Geeetech / Giantarm Spulen. Hier wird aber ein Adapter (angepasster Durchmesser) über die Spindel dann geschoben. → Adapter können selber designt werden und hier hochgeladen werden. → Wichtig: Durchmesser muss größer 8,0mm der Spindel sein und maximal 70mm breit sein.&nbsp;&nbsp;Bekannte passende Spulen ohne Adapter:-Eryone Spulen mit Außendurchmesser 200mm &amp; Innendurchmesser 55mm&nbsp;Bekannte passende Spulen mit Adapter: -Giantarm Spule mit Außendurchmesser 195mm &amp; Innendurchmesser 75mm → Adapter über Spindel stecken-Geeetech Spule mit Außendurchmesser 195mm &amp; Innendurchmesser 75mm → Adapter über Spindel stecken&nbsp;Beispiel äußere AMS Plätze → Adapter über Spindel schieben und einführen<img class="image_resized" style="width: 38.33%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_5d59c33203837.jpg"><img class="image_resized" style="width: 38.36%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_5e49a3eecc63e.jpg">Beispiel innere AMS Plätze → Spulen leicht auf die Seite drücken und Adapter an das Lager halten. Anschließend Spindel von außen einführen<img class="image_resized" style="width: 38.51%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_ee872c78612bb.jpg"><img class="image_resized" style="width: 38.47%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000508073/design/2024-06-24_0f040efe596a3.jpg">

AMS spool helper - no more jamming of the spools

AMS Mods

Bartyk

Demonic Skull modelled in Nomad Sculpt on the ipad. Requires support to print

Demonic Skull

Nice!

Comi

You can use this model to store your remote controllers (TV, speakers, …) and you can also screw it into a wall.

Double Remote Control Holder

Household

Josh-3D

I present to you today, a poker chip set for Monopoly! With Case!&nbsp;I had a friend that plays poker, but also enjoys Monopoly, and he got me hooked on the idea of using poker chips instead of the paper currency with monopoly. I designed this to be a custom fit set for Monopoly! Along with a case to keep it tidy.&nbsp;The print profiles are setup so there&#39;s 10 poker chips per a plate for each value. All in all you need 30 poker chips per a value. I wasn&#39;t sure if I should set the profiles up to only have one pokerchip on them, or try and cram them all on there. I printed them off in batches of ten though, so decided to keep it like I printed it. Should be easy to adjust for your own needs, if you want more or less. I recommend printing the poker chips on a smooth pei bed!&nbsp;The case comes in it&#39;s own print profile, as there were a number of custom settings setup for the poker chips to make them best. Of note on the poker chips, I set them to 100% infill, so they have a little more weight to them like real poker chips. I also had to adjust a few other settings to make sure the inset on the face facing down, prints nicely. Lastly, the poker chips are setup to us ironing for the top face!&nbsp;[Update] I have produced an A1 Mini version of the case, for the A1 Mini uses. Follow the Link <a target="_blank" href="https://makerworld.com/en/models/436699#profileId-341871" rel="nofollow noopener">HERE for more information</a><figure class="image image_resized" style="width:43.06%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000155467/design/2024-04-20_a48eace5ac067.jpeg"></figure>&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Monopoly Poker Chip set w/Case

Games

dieggs

A simple but well working protractor

Protractor -  Goniometro

Tools

droopster1984

Silica container for bags or beads to use inside spool.Can also be used to ad weight when necessary.No interference with ams, very slik desing.Hexagon Holes of 1.5mmCan print single or multicolor with bambulogo

Honeycomb SILICA DRY (or weight) BOX BAMBU SPOOL with thread no interference with AMS

3D Printing Utils

Bottega.co.nz

Original art created by us, then we used Hueforge to create this 200x200 piece.&nbsp;Please share your prints&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA PolyLite Black PLA PolyLite Steel Grey PLA BambuLab Basic Beige PLA PolyLite Pro Cold White &nbsp;Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Steel Grey At layer #10 (0.88mm) swap to Beige At layer #15 (1.28mm) swap to Cold White for the rest.

Darth Vader Hueforge

Lito

domi-dns

Ikea Skadis 220x220x5,1&nbsp;&nbsp;Post Your Makes / Follow Me / Check my Other Models

Ikea Skadis 220x220x5,1

Storage Systems

Sevro

Update:28.03.2024 - I redesigned the lamp a bit. I made it a little thicker, so now it is compatible with 12 mm LED strip and is also stronger.&nbsp;I used to this version LED STRIP from Bambu Lab Store<a target="_blank" href="https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes" rel="nofollow noopener">https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes</a>&nbsp;&nbsp;The diffuser has a larger flange and fits better into the main ring.I enlarged each piece by 110% so it now better takes advantage of bed size of the Bambu Lab printers <figure class="image image_resized" style="width: 68.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_e7c1da1fbecee.jpg"></figure>I created new print profile with this new design and will be develop this project with this size of lamp.If you want use front panels of other designers make sure that is proper size. If it too small just easy enlarge it to 110 % in X and Y axis <figure class="image image_resized" style="width: 44.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_867e2b9fbfc93.png"></figure>&nbsp;02.02.2024 - New front panel added : Deer in the forest05.02.2024 - New front : Birds in love&nbsp;&nbsp;Overview.A Ring Lamp that can be changed to different situations. I designed base with various panels which can adapt to various style and occasion. You can simply change color of it as well as pattern on it, by changing color of diffuser and changing different panels.WARNINGSLed strips can emits some heat depends on what type of led you and voltage you use. In my case temperature of Main Ring achieve 60 °C . Due to this I recommend use filament that can resist that temperature especially for Main Ring. I tested ASA and it works well. Other high temperature filaments should work too (ABS, PETG but I didn&#39;t test it) PLA in this case can bend over time especially if you use heavy panel like budha.So in summary I tested and recommend :Main Ring - ASABase, Diffuser - PLAPanels- PLA or ASAIf you want change panel, always wait to cool down the ring lamp, otherwise PLA cover can bend during take off.Electric parts you need.<ul><li> led stripe - I used: LED COB 8W/1M 12 V, 8mm wide - choose one that can be cut every 2.5 cm</li></ul><figure class="image image_resized" style="width: 430.185px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/6db55f53-37bb-4cbb-ba60-486465aa3c52.webp"></figure><ul><li>dc connector - I used 2.1/5,5 mm , the diameter of the mounting hole is 11.5 mm</li></ul><figure class="image image_resized" style="width: 424.403px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8867176f-a9e4-4554-8087-7b1fd3a6b430.webp"></figure><ul><li>OFF-ON SWITCH</li></ul><figure class="image image_resized" style="width: 424.332px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/5cf1687e-913a-4186-92f2-75d8d2bac909.png"></figure><figure class="image image_resized" style="width: 425.98px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/4ed0768e-9f72-45b5-9dc0-72aa2a703338.png"></figure><ul><li>Charger 12V</li></ul><figure class="image image_resized image-style-align-center" style="width: 434.759px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/1b0daae1-d790-41b4-a6da-4028c899a774.webp"></figure>Printed PartsMain Ring, Base and Panels can be printed in draft mode 0.28-0.30 mm layer height with no issue.Diffuser should be printed with 0.2 mm layer height.<ol><li>After print, glue led strip to inner side of Main Ring</li></ol><figure class="image image_resized" style="width: 539.361px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/55f0a8a9-5b68-4a7a-b60e-def1c0cf337a.webp"></figure>Start from hole on bottom side<figure class="image image_resized image-style-align-center" style="width: 537.429px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8f453fdd-01d6-476e-baaa-f03826eac490.webp"></figure>2. Put Main Ring into base. It should fit tight without glue.<figure class="image image_resized image-style-align-center" style="width: 538.864px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f03a229b-e68e-4835-9d5f-37f66a2677d0.webp"></figure>3. Insert the electric part into the base and connect them by soldering<figure class="image image_resized" style="width: 535.014px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2e73757c-be70-46f0-8fbb-ebc700b2e62a.webp"></figure><figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/75ca1515-ddbf-47b2-ab0d-34d6c3b795b9.webp"></figure>4. Insert Diffuser to Main Ring”. The Main Ring has a groove into which the Diffuser should be inserted and sit steadily. The flat side to the back.<figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/dd5e9b3f-84e4-47dc-8964-6b93b4f6ee46.webp"></figure><figure class="image image_resized" style="width: 527.23px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/3fc14977-a473-4279-b0d1-25f667c08fba.webp"></figure>5. Insert Panel into Main ring. The Panel has cuts at the bottom to avoid cutting the cables<figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f414f9b5-fc71-4e83-af57-faf01b92199e.webp"></figure><figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/d3004065-f61c-4175-b595-6235c7b8ead8.webp"></figure>&nbsp;If you any question or suggestion write to me&nbsp;Have fun

Ring Lamp with replaceable panels

Lamps

mystoopidstuff

When I bought my X1C, I picked up some spares, and a few more since, so I needed a place for them. I really like some of the spares cases already available, but I also enjoy designing, so I tried my hand at making a case to store my spare parts, and this case is the result.This case design is based largely on my (empty) <a target="_blank" href="https://www.printables.com/model/630027-box-for-stuff-bfs-v10" rel="nofollow noopener">Box For Stuff V2.1</a>. Additionally, this case uses some remixed parts from <a target="_blank" href="https://www.printables.com/model/567590-optimized-bambu-lab-accessory-storage-case" rel="nofollow noopener">Mr Sullivan&#39;s awesome Accessory Storage Case</a>. Specifically, this uses the holders for the full, and partial hot ends. There are some changes to the holding tabs as well from Mr Sullivan&#39;s design.&nbsp;This spares case is designed for the X1C, however it will work just fine with an X1E, P1P or P1S since all the spare parts should fit. There are currently no labels for the P1P, P1P or X1E yet, but I will include the template models as STEP files, in case somebody wants to make a label. Otherwise I may add those labels later, if they are requested.&nbsp;There are two versions of the top, one designed with a TPU gasket, and the other which does not have the gasket, just print the version you plan to use. I&#39;ve tested both designs (on this and other prototype cases), and the TPU gasket will not make it water tight, there are too many variables to that. I think the gasket helps though. But don&#39;t expect to dunk this case, and have everything stay dry. If anyone has a suggestion on the gasket design, let me know, and I may try updating the gasket, it if water tightness can be improved (depending on complexity of the changes).&nbsp;If printing the gasket version of the base, I recommend that you test that your printer can run TPU without issues first. The cap of a sharpie is the tool I use to press the TPU gasket into place. The gasket is not symmetrical so make sure to verify the position before installing it Start by pressing in the middle of the gasket along all 4 sides, then once it&#39;s set in position, press in the corners.&nbsp;I printed my prototype case in PETG, and that is what I suggest using, since PLA may be a bit brittle for some of the tabs and printed springs which retain the various parts.&nbsp;<h4>.3mf Files are included:</h4>The .3mf files which were generated with BambuStudio, and use a 0.4mm nozzle. Please use my profiles which have the most up to date models:&nbsp;1. X1C_Bambu_ToolKit-9B_NO_PRIME_TOWER.3mfThis file includes all the parts except for the labels and SD inserts. This includes several 2 color parts, which will need either a color swap or the AMS. This is set up without a prime tower for the reasons explained below.&nbsp;2. X1C_Bambu_ToolKit-9B_LABELS_AND_INSERTS_FOR_AMS.3mfThis file includes all the (new 2 peg) labels and SD card inserts, which require the AMS. The prime tower can be used normally on these. You can change the AMS colors and delete any items which are not going to be used from the build plate, before printing this one. For reference, my AMS was set up with the following colors when I set this file up:<ol><li>White PETG</li><li>Blue PETG</li><li>Orange PETG</li><li>Gray PETG</li><li>Black TPU (this one does not use the AMS and needs to be run from the spool holder)</li></ol>&nbsp;<h4>If printing without using the included .3mf files, the following may help:</h4>These models are organized into folders to help keep things together (it makes for quite a few folders, but most of them are not required). Most of the folders relate to parts for different labels, since those have different colors and each color is a part (to make it simple to colorize in the slicer). The parts are all designed to print without supports, but they will need to be oriented in the slicer for printing.&nbsp;The print settings I used are the OrcaSlicer defaults, with the following changes:&nbsp;Strength &gt; Infill &gt; Sparse Infill Pattern &gt; GyroidQuality &gt; Wall Generator &gt; Wall Generator &gt; Arachne&nbsp;For the TOP and BOT(tom) parts, which have an inlayed label, I recommend disabling the prime tower. It will waste a bit more material, but since these parts take up most of the build area, there is no room for the prime tower. The AMS is only required on the first several layers of these parts anyway.&nbsp;To disable the prime tower (for the Top and Bottom case parts with the inlayed labels):Under Process “Global” &gt; Others &gt; Prime Tower &gt; Enable (uncheck)&nbsp;For the labels and inserts, which use the AMS, the prime tower can be used without an issue.&nbsp;The following parts will need to be printed in multiples (quantities are in “( )”):(2) Bambu_ToolKit-7D_TOP_CLEAT.stl(5) Bambu_ToolKit-8Q_CUTTER_TAB_x5.stl&nbsp;<h4>Tips on building it:</h4>I recommend using safety glasses since there are a few parts that must snap in place. You can find a build guide for this on my website here:<a target="_blank" href="https://www.mystoopidstuff.com/bambu-spares-box-build-guide.html" rel="nofollow noopener">https://www.mystoopidstuff.com/bambu-spares-box-build-guide.html</a>&nbsp;This will require some M3 hardware to assemble. Specifically, it requires the following screws:(8) M3 x 6mm BHCS(7) M3 x 10mm SHCS(2) M3 x 14mm SHCS(8) M3 x 20mm SHCS(4) M3 x 25mm SHCS(2) M3 x 30mm SHCSBHCS = Button Head Cap ScrewsSHCS = Socket Head Cap Screws&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;If you find these models useful, please post a like or a comment with some pics of your prints.&nbsp;You can find the other things I&#39;m working on at my blog <a target="_blank" href="https://www.mystoopidstuff.com/blog" rel="nofollow noopener">here</a>. You can also follow me <a target="_blank" href="https://makerworld.com/en/u/2561228817" rel="nofollow noopener">here</a> or on <a target="_blank" href="https://www.printables.com/@MyStoopidStuff/models" rel="nofollow noopener">Printables,</a> to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:<a target="_blank" href="https://www.buymeacoffee.com/mystoopidstuff" rel="nofollow noopener">https://www.buymeacoffee.com/mystoopidstuff</a>Thanks for looking!&nbsp;The model posted here is for personal, non-commercial use only, and is being shared (for free) with the 3D printing community to help us organize our Bambu printer stuff (so we can get it all together, and put in this box…all the stuff…so it&#39;s together). The trademarks used in this model belong to Bambu Lab.&nbsp;UPDATES AND CHANGES:&nbsp;Update 12/4/2023 - Apologies, I was looking over this model today and noticed that the draw latch parts were missing. I have since uploaded them in the folder named “Latch Parts”.&nbsp;Update 12/25/2023 - Thanks to feedback from “Stephen Friend”@Printables, who advised me that the handle was missing, I&#39;ve added that part to the “BOTTOM PARTS” folder.&nbsp;UPDATE 1/20/2024: Thanks to some helpful feedback, the bins for the Wipers and Cutters have been updated.&nbsp;Update 2/10/2024: I had two reports that installing the M3 SHCS would crack the hinge on this and similar models. The problem seemed to be related to slightly different size screw head diameters between M3 screws (I have measured between 4.9-5.6mm diameters). To address that problem, I&#39;ve updated the files here to Version 2.1, which has a bit more clearance for larger M3 SHCS heads (the pockets are 5.8mm diameter). The new version also includes an update to the label and handle designs (if you need the old v1.0 3 peg labels or handle, see the remixes). The 3MF and STEP files are also now updated with all the current V2.1 changes, including the new wiper and cutter designs.&nbsp;Update 3/10/2024: It was suggested in the comments that since some folks don&#39;t use the Bambu Liquid Glue, the space could be better utilized. This remix will not replace the current design, but will be an additional option. The new compartment will also be able to hold the glue bottles (though not as securely as the current design). The changes made for this option were only to the bottom of the case. You can find the remix here:<h3><a target="_blank" href="https://makerworld.com/en/models/243389" rel="nofollow noopener">https://makerworld.com/en/models/243389</a></h3>Pics of the remix are below, with the door closed and open: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062636/design/2024-03-07_232c275c8afe4.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000062636/design/2024-03-10_4ade89f62e81c.jpg"></figure>Update 6/12/2024:  The profiles were updated with the following changes:<ul><li> increased walls from 2 to 3 on all parts</li><li> changed infill on the latches, handles and labels to 100% to provide these with extra strength</li></ul>

Bambu Labs X1C Spare Parts Case (Version 2.1)

Boxes

JayRay

This is the original #3DBenchy directly from Creative Tools. Not a download of a download, nor all the slightly modified versions found elsewhere (ie, BambuLab Studio, Printables, etc…)&nbsp;I would like to introduce the #3DBenchy to Maker World. During the close beta period, there was no #3DBenchy available to send to the printer from the phone app so I uploaded it here. &nbsp;Please add your profiles as you see fit for the community to use to run tests. Thanks!&nbsp;Community members have provided a ton of different profiles. I hope you find one that fits your testing needs. Remember, a bad Benchy print could mean your filament calibrations are off, or a sign of mechanical error (for Bambu Printers.)&nbsp;All models uploaded and the below content is extracted from 3Dbenchy.com.<figure class="media"><div data-oembed-url="https://youtu.be/_epwuDI9FBI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/_epwuDI9FBI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<figure class="image"><a href="http://www.3dbenchy.com/features/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy__Low-slope_surfaces_1-300x300.png"></a></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Visit <a target="_blank" href="http://www.3dbenchy.com/sample-page/features/" rel="nofollow noopener">this link</a> to see a complete list of each feature and correspondent descriptions.<figure class="image"><a href="http://www.3dbenchy.com/dimensions/" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_about_features-300x287.png"></a></figure>Use #3DBenchy to test and calibrate your 3D printer by adjusting hardware and software settings for optimal results.The shape and size of this 3D model is designed to challenge 3D printers. Compare your #3DBenchy results with the dimensions illustrated in <a target="_blank" href="http://www.3dbenchy.com/dimensions/" rel="nofollow noopener">this link</a>. These are easy to measure with a caliper.Print and check your 3D-printer’s result for dimensional accuracy, tolerances, warping and deviations related to changes in printing parameters and material types.&nbsp;<h2>Features</h2><figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_page_features_main_image.png"></figure>#3DBenchy is designed to offer a large array of challenging geometrical features for 3D printers, and touch on different issues related to additive manufacturing.The 3D model is designed to print at 1:1 scale without support materials. It is challenging for most 3D printers but the small volume (15.55 cm3) typically prints in well under two hours and does not require much material.The different surfaces of the #3DBenchy model reveal typical issues regarding surface finish, model accuracy, warping, etc.Please see a complete list of each feature and correspondent descriptions below.&nbsp;<h2>The Hull</h2>The hull is a large, smooth overhanging curved surface that is challenging to 3D-print, and clearly reveals any surface deviations.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hull_curved_overhang-300x300.png" alt="Feature_hull_curved_overhang"></figure>&nbsp;<h2>Symmetry</h2>#3DBenchy is perfectly symmetrical which makes any skewness and warping easy to detect.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_symmetry-300x300.png" alt="Feature_symmetry"></figure>&nbsp;<h2>High-Resolution STL file</h2>The STL file is triangulated at a very high resolution which yields smooth surfaces. The maximum deviation from the original CAD file is set to 0.001 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_high-res_stl_mesh-300x300.png" alt="Feature_high-res_stl_mesh"></figure>&nbsp;<h2>Planar Horizontal Faces</h2>The top surfaces of the deck, box and chimney are planar, horizontal and parallel to the bottom plane.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_planar_horizontal_faces-300x300.png" alt="Feature_planar_horizontal_faces"></figure>&nbsp;<h2>Tiny Surface Details</h2>If you have a high-resolution 3D printer, this is where you can shine! The letters on the stern are less than 2 mm tall and the thickness of #3DBenchy’s nameplate is just 0.1 mm.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_3DBenchy_nameplate_tiny_detail-300x300.png"></figure>&nbsp;<h2>Cylindrical Shapes</h2>The chimney is designed to define concentrical cylindrical shapes with inner and outer diameters. These clearly show deviations in roundness.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_conentrical_cylindrical_shapes-300x300.png" alt="Feature_conentrical_cylindrical_shapes"></figure>&nbsp;<h2>Overhang Surfaces</h2>Overhang issues are the Achilles’ heel of 3D printing. #3DBenchy offers several challenging areas such as in the difficult-to-reach inside of the bridge.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_overhang_bridge-300x300.png" alt="Feature_overhang_bridge"></figure>&nbsp;<h2>Low-Slope-Surfaces</h2>Low-slope-surfaces clearly show the layered structure of 3D printing. If printed horizontally, #3DBenchy’s gunwale and roof of the bridge will reveal the layer-steps.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_low-slope-surfaces-300x300.png" alt="Feature_low-slope-surfaces"></figure><h2>Large Horizontal Holes</h2>The rear window offers a large circular horizontal hole and the boat’s wheel offers a round difficult-to-reach secluded feature.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_large_horizontal_hole-300x300.png" alt="Feature_large_horizontal_hole"></figure>&nbsp;<h2>Small Horizontal Holes</h2>The hawsepipe represents a small short horizontal hole and has a very thin flange against the hull.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_hawsepipe_small_hole-300x300.png" alt="Feature_hawsepipe_small_hole"></figure>&nbsp;<h2>Slanted Small Holes</h2>The fishing-rod-holder provides a very small slightly-slanted blind hole.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_fishing-rod-holder_slanted_small_hole-300x300.png" alt="Feature_fishing-rod-holder_slanted_small_hole"></figure>&nbsp;<h2>First-Layer-Details</h2>The shallow letters at the bottom of the boat clearly reveal typical first-layer-squashing.&nbsp;<figure class="image"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/Feature_shallow_letters_bottom_plate-300x300.png" alt="Feature_shallow_letters_bottom_plate"></figure><h2> License</h2><figure class="image"><a href="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041.jpg" target="_blank" rel="nofollow noopener"><img src="http://www.3dbenchy.com/wp-content/uploads/2015/04/3DBenchy_frontpage_slider_sea_v041-1024x402.jpg"></a></figure>&nbsp;#3DBenchy by <a target="_blank" href="http://creative-tools.com/" rel="nofollow noopener">Creative-Tools.com</a> is licensed under a <a target="_blank" href="http://creativecommons.org/licenses/by-nd/4.0/" rel="nofollow noopener">Creative Commons Attribution-NoDerivatives 4.0 International License</a>. Permissions beyond the scope and typical usage examples are explained below.&nbsp;<h2>Feel free to …</h2><ol><li>… download the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> and 3D-print it as you please.</li><li>… give away and even sell 3D-prints of the <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a>.</li><li>… <a target="_blank" href="http://www.3dbenchy.com/share/" rel="nofollow noopener">publish</a> images and videos of your 3D-prints – you own them!</li><li>… redistribute the unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">#3DBenchy STL file</a> as you please. Such as hosting your own downloads, attaching to emails, including the file on DVDs, USB-sticks, and in software distributions, bundling the STL or pre-sliced print file with 3D printer kits, etc.</li><li>… experiment, be inventive and creative! We made #3DBenchy as a tool for playing around with and testing 3D printers. Improve your skills and challenge your machine and its software. Try every setting, variation and material you can think of!</li><li>… modify #3DBenchy for personal use. Feel free to publish texts, images and videos of your experimentation (these are your work and you own them!). Please respect the above list items regarding not distributing modified STL files of #3DBenchy.</li></ol><h2>Consistency</h2>#3DBenchy is designed to be a calibration tool for testing 3D print settings and comparing the performance of different 3D printers. Therefore it is important that the same unmodified <a target="_blank" href="http://www.3dbenchy.com/download/" rel="nofollow noopener">STL</a> file is consistently used for this purpose.<h2>Attribution</h2>We designed the little #3DBenchy boat and this expanding web page to help 3D printer operators on this planet to better navigate the vast sea of 3D printing possibilities!It is also meant to be a fun object to experiment with and discover 3D printing. If you enjoy #3DBenchy and the content on this site, please give us attribution in your publishings. Simply include the word <a target="_blank" href="https://www.google.se/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=%233dbenchy" rel="nofollow noopener">#3DBenchy</a> and the URL <a target="_blank" href="http://3dbenchy.com/" rel="nofollow noopener">3DBenchy.com</a>. The team behind #3DBenchy highly appreciates your help!

BENCHY

Printer Calibration

GlennovitS 3D

<figure class="table"><table style="border: 4px solid rgb(77, 230, 77)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models, get access to exclusive models, and get commercial rights, to sell prints of my models. <a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">Join today - GlennovitS3D</a> - or check out my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D" rel="nofollow noopener">model collection</a> 🗂️ and my <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/1401115" rel="nofollow noopener">popular models 🔥</a></td></tr></tbody></table></figure>Updates:<figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/2024-06-13_68fab90b938e68.jpeg"></figure>13. June 2024 - New <a target="_blank" href="https://makerworld.com/en/models/494875#profileId-408895" rel="nofollow noopener">Minimals Savanna Pack</a> available! 🦓🦒🦏🐆&nbsp;Animals.. but mini… Minimals! Enjoy this first pack/collection of safari Minimals!<figure class="image image_resized image-style-align-right" style="width: 49.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/4df051e6-ab54-4703-909d-fe9a831e343e.gif"></figure>Perfect for your desk or somewhere else, where they can sit and maybe bring a smile when you see them.This collection contains 4 animals - but are there more coming?..<h3>Overview</h3>Say hi to your 4 new buddies:<ul><li>Elly Elephant 🐘</li><li>Luke Lion 🦁</li><li>Maddy Monkey 🐵</li><li>Chris Crocodile 🐊</li></ul>All of them comes in multiple versions:<ul><li>Single file (fx. Elephant.stl)<ul><li>Can be printed in single color</li><li>..or split to parts in slicer and printed easily in multicolor with an AMS</li></ul></li><li>Multiple files (different parts, to print in different colors seperatly and glued together afterwards)</li></ul><figure class="table" style="height: 0px; width: 0px"><table style="border: 4px solid rgb(153, 230, 77)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">More Minimals or other fun models? I got you covered! Check out this <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/1289189" rel="nofollow noopener">Minimals collection</a> - or this <a target="_blank" href="https://makerworld.com/en/@GlennovitS3D/collections/97409" rel="nofollow noopener">collection of fun models</a> - everything from toys, to puzzles and games.</td></tr></tbody></table></figure><h3>Assembly</h3><figure class="image image_resized image-style-align-right" style="width: 50.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000466386/design/202ca7b5-5c65-48e3-93b6-189be1b15386.webp"></figure>If you print the pieces seperatly (maybe to have multiple colors without an AMS), you need to glue things together. This requires a steady hand - they are small, and the pieces is really small. Now you are warned<h3>Multicolor prints</h3>This is optional - but looks nice! You can do like this (in Bambu Studio):<ol><li>Insert the single-file-version you want (fx. Elephant.stl)</li><li>Right click on the model and click on Split &gt; To parts</li><li>In the left pane Process click on Objects</li><li>Select individual parts of the model and choose filament for each.</li></ol><h3>Print instructions</h3>Here is a few ideas to get started:<ul><li>Supports: Yes - overhangs like ears requires supports. I have mine set to Automatic Organic Tree supports with a Threshold angle of 25. Worked just fine</li><li>Colors: paint in slicer</li><li>Orientation: Printing the single-file-versions - just as they come. But if printing the pieces seperatly, you need to rotate them to optimal position (and even lowering some a bit ‘below’ the printbed. This is done for you in the Bambu Studio project files!</li></ul>Happy printing!