This is square modeled after the woodpeckers 642. This is nowhere near the quality of the woodpeckers however it should work fine. The woodpecker model is out of my budget so i designed this. If you like this model I'd suggest considering purchasing the offical woodpeckers 642 as it is a high quality square and also includes scribe notches.

My case trimmer only had a .243 pilot (bought it used) so i designted a .224 diameter pilot to trim some 223 cases. I didnt go crazy with tightening the setscrew and it seemed to hold it well. First case was a tight fit so i cranked the trimmer and slowly applied pressure to work case onto pilot and it worked well. Obviously a steel pilot is a much better soloution but this got me going in less than an hour instead of waiting a week to get a proper steel one.

TPU feet for mini toolbox. I don't like having metal on my desk so i designed these strips. I have a mastercraft mini toolbox but should fit the us general and kobalt versions as well. Will need double sided tape or adhesive to fasten to toolbox.

This is a sponge or soap tray made to fin inside a lid of the newer poly propylene 16 piece Ferrero Rocher box. New style box was introduced September of 2021. May also fit old style box but I don't have one to test it. Holes in grid may be a little large for use as a soap dish but works well for a sponge. Fits up to 70mm x 137mm sponge or soap. Good use for an empty Ferrero Rocher box.

This is a 1:1 scale model of the 6mm arc introduced by hornady.

I wanted a handy shot glass that's light and won't break like glass. Also I wanted inside corners radiused for ease of cleaning. I designed this in onshape. Understand risks regarding food safety of 3d printed objects before using.