user_3382500881

Fletch

The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.&nbsp;This model should fit all Bambu printers. You will need to move the model to the corner on the A1 mini to fit both the model and prime tower.&nbsp;Update 3/14/24 - <a target="_blank" href="https://makerworld.com/en/models/254506" rel="nofollow noopener">Added a stand to display the Saturn V rocket that can be found here</a>.&nbsp;NotesThe antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.&nbsp;Assembly<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_0c0b17411535b8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_88e6226af64dd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c99b1d1591bfb.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c63a7fd7539ff8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_725c5a900205e8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_a0f5646572fbd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_38eaf64fc600e.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_bf8c15a68b8df8.jpg">

NASA Saturn V Kit Card

卡片组装

多少沾点

原神甘雨彩色浮雕画p3为ams耗材选择顺序 p4为各色耗材对应设置（在”对象“设置中） 需要使用cmyk耗材，不限制品牌方，图片中是拓竹官方耗材。 （如果是下载原模型进入切片软件，请全选所有stl拖入，并在弹出：“加载为一个多零件对象”时选择是）&nbsp;

甘雨彩色浮雕画

浮雕

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_yztq9u8cw9ql.png"></figure><h4>Dimensions (LxWxH)</h4>110 x 64,32 x 20,18 mm (100% scale)<h4>Basic information</h4>Trilobites have been extinct for quite a while now, so you most likely won't get the chance to hold one in your hand any time soon. Until someone brings them back to life, here's a good alternative!<h4>Files information</h4>I've included 1 file in the .stl format.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_zj8hmawflnb0.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>The model was designed not to require any support material.<h4>Scaling</h4>A well tuned setup should be able to print the model reliably at up to 50% scale, I wouldn't recommend going below that. If you're printing a downscaled version, you need to make sure, that the first layer adhesion is sufficient, as the contact area isn't exactly big, and it might cause issues.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>If your printer suffers from poor buildplate adhesion, consider using some kind of adhesion booster, such as adhesive spray or glue. The contact area is fairly small, and the print might detach otherwise.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_1vlcwoutsbqk.png"></figure>In this section, you can find a list of all updates and fixes, which were introduced to the model along the way. Each update will be explained thoroughly, so that you know, which issue was every specific update adressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please visit the section of known issues, which can be found just below Updates and fixes. If you won't find your specific problem there, don't hesitate to contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_7qvyiugvs1b6.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381124/2024-01-09_4fjxyiwkmug8.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in other way, please contact me via dm, and we will discuss details, terms and conditions, and your individual pricing plan.

Articulated Trilobite

动物

TheCreator

This shifter design was intended to fit into position in a similar way to a real shifter. It has a spring that returns it to its central position and a locking system that keeps it in every position. The only element that is not 3D printed is a 5cm long m4 screw. It is possible that depending on the screw you use, the head is different and does not fit correctly on the support piece. I&#39;ve tried different screws and most of them work properly, so if you find one that doesn&#39;t, I ask you to let me know. Every piece is built by locking in place, more info in the pictures.

Gear Shift Fidget Toy

玩具

G__W__

山海 ShanHai Realm --策略性桌遊 a Strategic Board game

大件

Golub17

Alternative filament guides for AMS saver by <a target="_blank" href="https://makerworld.com/en/@madizmo" rel="nofollow noopener">https://makerworld.com/en/@madizmo</a> The AMS saver model in question <a target="_blank" href="https://makerworld.com/en/models/156593?from=search#profileId-171555" rel="nofollow noopener">https://makerworld.com/en/models/156593?from=search#profileId-171555</a> Working flawlessly so far, even with cardboard and off-brand spools. Collection of My Accessories for 3D Printers: <a target="_blank" href="https://makerworld.com/@golub17/collections/1575941" rel="nofollow noopener">https://makerworld.com/@golub17/collections/1575941</a>

Slim Filament Guide for AMS saver

打印机配件

Tom Skehan

This is a fully 3D printable spur gear assembly, which once together spins easily with a cool handle. Fun printing project for working out how gears work or even use it as a fidget toy. To assemble, first remove the small supports under the base and the handle arm, once removed push the handle piece into the indent/hole in the arm. Next put the large gear onto the pin of the base and secure it with one of the C clips. Next place the small gear over the remainin hole on the base and secure it with the assembled handle. Finally lock the handle in place by inserting the remaining C clip on the underside of the base. Note that all of the assembly is photographed above. Feel free to check out my other gear projects for download on my makerworld profile.

卡片组装

浮雕

动物

玩具

大件

打印机配件

准备打印