user_3345072958

OtakuMx

This keychain is roughly based on the PMAG 30 (Technically the windowed-version), and likewise the “<a target="_blank" href="https://www.thingiverse.com/thing:2827845/files" rel="nofollow noopener">5.56 x 45 PMAG Real Size</a>” model by <a target="_blank" href="https://www.thingiverse.com/xTrITeX" rel="nofollow noopener">xTrITeX</a>.&nbsp;<h4>Assembly:</h4><ul><li>It is designed with a ‘jump ring’ in mind to connect to a larger ‘key ring’ <ul><li>Jump rings being a small ring that connects to the actual trinket - You can get a set of 2000+ for under $5 on amazon/AliExpress.</li></ul></li></ul><h4>Changes:</h4><ul><li>Scaled down 30% (Length about 60mm)</li><li>Filled interior as 30% with hollow interior was very flimsy.<ul><li>Side note: This took hours… there is no good way to do this..</li></ul></li><li>Added key-ring loop.</li></ul>&nbsp;Perfect gift for someone who has a hobby with firearms!&nbsp;<h4>The above prints are with:</h4><ul><li>Black Polymaker PLA Pro</li><li>Overture (Brown) PLA</li></ul><h4>Notes:</h4><ul><li>This is under a non-commercial license; you may NOT sell prints of this</li><li>Original design by <a target="_blank" href="https://www.thingiverse.com/xTrITeX" rel="nofollow noopener">xTrITeX</a></li></ul>&nbsp;<h3>Checkout my other Keychains & Models!</h3>&nbsp;<figure class="table" style="width:100%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><thead><tr><th style="text-align:center;">Lantern Keychain</th><th style="text-align:center;">Camping Lantern Keychain</th><th style="text-align:center;">Japanese Style Lantern Keychain</th></tr><tr><th><a target="_blank" href="https://makerworld.com/en/models/173259#profileId-190354" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/779049/2024-02-05_3a2be11466f1c8.gif"></a></th><th><a target="_blank" href="https://makerworld.com/en/models/178596#profileId-196531" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/779049/2024-02-09_73d69d4be9ee6.gif"></a></th><th><a target="_blank" href="https://makerworld.com/en/models/180301#profileId-198347" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/779049/2024-02-10_5118879f56c58.gif"></a></th></tr></thead><tbody><tr><td style="text-align:center;">5.56 Bullet + Optional Keychain</td><td style="text-align:center;">.50 Cal Bullet + Optional Keychain</td><td style="text-align:center;">9mm Bullet + Optional Keychain</td></tr><tr><td><a target="_blank" href="https://makerworld.com/en/models/61348#profileId-63864" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/779049/2024-01-19_b4b5cdcfba254.png"></a></td><td><a target="_blank" href="https://makerworld.com/en/models/61349#profileId-63861" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/779049/2024-01-19_4d941962b9d49.png"></a></td><td><a target="_blank" href="https://makerworld.com/en/models/146930#profileId-160281" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/779049/2024-01-19_c30bd572b1e9f.png"></a></td></tr></tbody></table></figure>

Rifle Magazine KeyChain - PMAG

Military

Print Design

You can easily assemble all pieces printed at once. No support needed and I recommend printing all parts vertically like in the profile. Very fun and works great ;).&nbsp;If Lighter is loose in the sleeve I recommend wrapping a little piece of tape(any) around it and it will be fine (sometimes happens sometimes not, ig it depends on the printer or the lighter). This model was made for the bic mini and all lighters of mini size.

Lighter sleeve Balisong Butterfly Knife

Cool

3D Print Bros

<a target="_blank" href="https://www.tiktok.com/@brady_meets_world" rel="nofollow noopener">@bradyprints on Tiktok</a> challenged the 3D printing community to print the popular <a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">Gyro Fidget Spinner</a> as big as they can, but I couldn&#39;t help but notice there is one glaring issue - as you scale up the model, the tolerances between the spinning rings also scale up, resulting in a wobbly spinner.&nbsp;To combat this, I redesigned it with updated tolerances for a smooth spinning experience. This model is 300% scale of the <a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">original</a>! This behemoth spinner is a true statement piece. Perfect for any coffee table and a great conversation starter. Even looks awesome hung on the wall! Not to mention it&#39;s strangely addicting to spin.&nbsp;&nbsp;<a target="_blank" href="https://cults3d.com/en/3d-model/game/commercial-license-jumbo-gyro-fidget-spinner-v2" rel="nofollow noopener">Onetime payment commercial license available on Cults3D here!</a>  Don&#39;t forget to print the pocket-sized version for fidgeting on-the-go here:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/245471#profileId-261872" rel="nofollow noopener">Gyro Fidget Spinner V2 by 3DPrintBros - MakerWorld</a> &nbsp;And if that&#39;s still too big for you, check out the Micro Gyro:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/435704#profileId-340795" rel="nofollow noopener">Micro Gyro Fidget Spinner by 3D Print Bros - MakerWorld</a><figure class="image image_resized" style="width:34.82%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000393051/design/2024-04-19_e3cf893471adc.gif"></figure>— &nbsp;&nbsp;Now that you&#39;ve printed this glorious piece, put it on display with the perfect stand designed by Stickler:  <a target="_blank" href="https://makerworld.com/en/models/423233#profileId-326399" rel="nofollow noopener">Display Stand - Jumbo Gyro Fidget Spinner by Stickler - MakerWorld</a><figure class="image image_resized" style="width:62.09%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000393051/design/2024-04-11_9520a9b47d052.jpg"></figure>

Jumbo Gyro Fidget Spinner

Toys

Ben 3d Prints

The Luke lightsaber keychain is designed to be printed in 2 parts: hilt and blade.&nbsp;Assembly:The blade should click into the hilt however it may need to be superglued.&nbsp;Printing Instructions:Tree supports on the build plate onlyBrim on the blade0.2mm layer height works but can go smaller for better quality&nbsp;Check out my other listings:<a target="_blank" href="https://makerworld.com/en/models/236267" rel="nofollow noopener">https://makerworld.com/en/models/236267</a><a target="_blank" href="https://makerworld.com/en/models/236265" rel="nofollow noopener">https://makerworld.com/en/models/236265</a>&nbsp;

Luke Lightsaber Keychain

KeyChain

ming

免支撑一体成型 章鱼 Unsupported one-piece octopus

免支撑一体成型 章鱼 Unsupported one-piece octopus

Articulated

Fletch

Spring has started, so that means it&#39;s time to get the greenhouse ready for some fresh veggies! I wanted to do some thing a little fun and different this year, so I decided to make some Mario themed seed starters for getting the plants ready. These pots are self watering, so you don&#39;t have to worry about watering them every day.&nbsp;Place a cotton ball or any wicking type material in the bottom part of the small pot. Screw the bottom onto the pot, add some dirt and seed, add a little water to the dirt, and you&#39;re ready to go. Make sure the water stays below main pot, so that the wicking material stays wet and keeps your plants happy!&nbsp;When you&#39;re ready to transplant, unscrew the bottom of the pot and push up!&nbsp;UpdateA profile for a humidity dome has been added. I decided to go with individual domes for each pot after a lot of experimenting. It somehow came out requiring less plastic and print time when printing 6 at a time vs a single dome covering the entire 3x2 tray. I recommend letting the build plate cool before trying to remove as it is only 2 surfaces and single wall. The print speed is turned down a lot to improve clarity.

Mario Seed Starter Tray - Self Watering

UseFul

koko

需要添加一定支撑 这样会更加完美

钢铁侠半身像 Iron Man 摆件

Action Figure

kevingao1998

Model of .44 MG Desert Eagle, may update with moving parts in the futureI believe someone has made a print profile with AMS multicolour, check it out!&nbsp;Note: Recommended to turn on "build plate only" for supports, I forgot to do that in my print profile&nbsp;

Desert Eagle

Guns

Special Printing Services

Model of a legendary fighting knife used by Special Air Services during WW2.It is just a prop, not a functional knife. Be careful when using.Not suitable for children Who dares wins

SAS legendary Fighting knife, early version

Knifes

nbalet

Replica of the german Flying bomb Fiesler Fi.103, also known as the V1. print the fuselage upward, the wings (ala_sx & ala_dx) and the horizontal stabilizers (equilibratore_sx) with the tip on the bed, the rudder (deriva) is to be printed with supports. the engione (motore) can be printed without supports.

V1 Flying Bomb

Props

3D Delight

Scale miniature container with openable doors. Once roof lid is glue you can pressure fit the doors on hinges.