user_3323432575

Kris95

cute models of a keychain and a magnet of Bubble tea Hope you like it! I am a beginner in the 3d printing so it is not perfect, but HEY its cute :D

bubble bobba tea keychain magnet

magnets

Whopper Printing

This fun model is print-in-place and prints entirely without support and folds together right off the build plate. No assembly!&nbsp;This model is designed to fit small LED tealights inside (but you can change the source of light to anything you want)! Optionally, I've designed an insert that when lit from the back, takes the design to another level!&nbsp;The wheels are locked to the body of the model during printing in order to ensure nothing comes off the print bed during printing, but can be broken free and rotated after printing.&nbsp;If you would like to support me, consider these options:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Haunted Hearse - Print-in-Place Foldable Model

Goth

vali

Wobbley mouse toy for cats. Fill the mouse with cat nip or silver vine.Tip: if you have liquid cat nip, you van spray a tissue and put that inside.&nbsp;The base need to be 100% solid, I used 99 walls.&nbsp;There are two versions, one with small whisker holes for fishing line and one with larger holes for filament whiskers.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000463573/design/2024-05-14_574064b86b7f1.jpg"></figure>

Wobble Mouse Toy for Cats

PenolopyBulnick

I decided to make cutout Rupee earrings inspired by The Legend of Zelda.&nbsp;Each earring is printed in 2 pieces that are glued together.&nbsp;I've also added a full 3D rupee earring but I always have issues with those. &nbsp;Full instructions for these rupee earrings can be found on Instructables: <a target="_blank" href="https://www.instructables.com/id/3D-Rupee-Earrings/" rel="nofollow noopener">https://www.instructables.com/id/3D-Rupee-Earrings/</a>

Rupee Earring

Gifts

Another attempt at HueForge earrings!&nbsp;I really love the way dripping paint looks and I like the idea of paint dripping around a circle or hoop and dripping off the bottom. That was the inspiriation and prompt for the design. &nbsp;This design was created in <a href="Craiyon.com" rel="nofollow">Craiyon.com</a>. It was then run through <a target="_blank" href="https://shop.thehueforge.com/" rel="nofollow noopener">HueForge</a>. I then shaped it in the Bambu Slicer as the original shape was square. &nbsp;I decided to try this with shades of pink, but I think it could look good in other colors as well. The original image I found had it in orange. &nbsp;Layers 1 - 5 : BlackLayers 6 - 13 : Magenta (Inland)Layers 14 - 17 : Medium Pink (MatterHackers)Layers 18 - 23 : Light Pink (Inland)Layers 24 - Top : White&nbsp;I think the white got a little thick on this one, so you could consider chopping off a few of the top layers. &nbsp;.08mm Extra Fine settings were used with .4 Nozzle.Ironing was used on ALL top surfaces, but this can be a matter of preference.Gyroid infill is used where it is necessary but 100% infill could also be good with how small and thin it is.I use a Prime Tower, but it is small. Possibly not necessary but helps sometimes.

Stylized Paint Drip Earrings HueForge

Earrings 

3DNoviceDiY

Looking for a way to organise your bed side table or your reading area? This is was a quick design inspired by a wooden model i saw online. It has a place for you glasses, keeps your coffee/tea mug safe and most importantly, your book's split spine will be safe. &nbsp;Easy to print with no supports - you can print the coaster in a different colour to make it stand out. It can be printed on any 3D printer with a bed size of 180*180*160mm&nbsp;You will need to insert 4 magnets & glue into the base & cup holder - see the last photo. Magnets used: 6mm diameter * 2mm thickness &nbsp;Make sure you insert the magnets correctly so the N & S poles attract each other.&nbsp;Free feel to sell the printed items.

Book & Coffee Holder

commercial use

clothes

K2_Kevin

I use 3 lenses a lot, so I needed a lens cap holder that could hold all three sizes. Simple design that's easy to attach to your molle bag or camera strap. Attach one tab, rotate to slide second tab onto your strap. Im so excited for this simple little design, its changed my photography world. LOLCap sizes: 40.5mm - 49mm - 55mmNEW QUADRUPLE THREAT: Cap sizes: 40.5mm - 49mm - 55mm - 58mmNOTE: If you have lens cap sizes not listed above, please msg. me. I'm working on a larger version that will hold larger common sizes.<h5> </h5><h5>My Print Settings: </h5><ul><li>0.16mm or 0.20mm Layer height </li><li>3 perimeters</li><li>20% infill or your own preference</li></ul>

Camera Lens Cap Holder (Triple Threat)

Camera

lasse1999

Traditional bookmark and paperclip.

Bookmark or paperclip

Bookmarks

Justin Lauck

Gardening season is starting here, and I need to start my tomatoes and peppers in the next two weeks. I needed some pots to get them started in. There is a frame that will hold six pots together.

2 1/2" Seed starting pots

trixs3D

Pencil holder&nbsp;<ul><li>without supports</li></ul>

Frog / pencil holder

business

Darrare

A prop/cosplay sword and sheath that holds a standard dice set for D&D. I printed a bunch of these out for friends for Christmas or birthday gifts super easily, only very minor supports needed.&nbsp;The hilt and blade have some nubs that interlock, but what I did was I used the hot end of my hot glue gun to melt the nubs and melt a bit in the hilt to create an uneven surface to let the hot glue really hold with a strong bond. I also just tried plain super glue and it held really well, but not as sturdy as the hot glue gun method.

Dice Holder for D&D Dice Set

FunFam3D

Adorable Easter egg key chains, bag tags, and/or zipper pulls in 7 different types.Can also be sized down for earrings.&nbsp;Print files available :All 7 eggs 4 colors by layerAll 7 eggs 1 colorindividual eggs 4 color by layerindividual eggs 1 color

Easter Egg Keychains

Keychains

michal0082

Hello. Today I have something completely new for you. A puzzle for the youngest ones. It's a simple puzzle that develops children's motor skills and shape recognition. There are two versions available. In the first version, smaller shapes can be inserted. In the second version, there are only 5 basic shapes. No AMS is required. It can be printed on any printer larger than 250 x 250mm. Happy printing.&nbsp;WARNING This toy is not intended for children under 3 years old. WARNING&nbsp;You can find more toys here:<a target="_blank" href="https://makerworld.com/en/u/1621874954/collections/441100" rel="nofollow noopener">https://makerworld.com/en/u/1621874954/collections/441100</a>

Montessori insert toys 1

Household

HL3dDesign

<h4>Check out my new updated model Jumping Frog_v2 ! ! ! jumping even further! ! !</h4>Enjoy<h4><a target="_blank" href="https://makerworld.com/en/models/466323#profileId-375296" rel="nofollow noopener">Jumping frog_v2</a></h4>https://makerworld.com/en/models/466323#profileId-375296<h4> </h4><h4>Introducing the Jumping Frog, a hilarious toy that guarantees endless fun!</h4><h4>This funny little creature can be printed in just about 30 minutes, making it a quick and easy activity to enjoy with your kids.</h4><h4>Watch as the Jumping Frog leaps and bounces around, bringing laughter and excitement to your playtime. Get ready for some unforgettable moments with this entertaining toy!</h4>

Jumping Frog

Freebies

LiL_PPJ

useful rack to display keychains and others

spinning keychain display (stackable)

Display

Jaatinen3D

Fun fidget toy you can spin around your fingers making tricks and impressing your imaginary friend! Print a chain of appropriate length (I&#39;m using length 14, it feels nice) and attach the Ring and End to the chain. Ready to spin!&nbsp;Prints nicely without supports!&nbsp;---Check out the new <a target="_blank" href="https://makerworld.com/en/models/151261" rel="nofollow noopener">Ringchaku Wall Hook</a> to display and store your Ringchaku!---&nbsp;---Update 2024-19-01: I&#39;ve added three smaller versions of the ring: 22mm, 20mm and 18mm. Let me know if you need even smaller!---&nbsp;<figure class="media"></figure>&nbsp;<h3>Check out the special editions too:</h3><figure class="table" style="width: 100%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-22_5e3d7929a825c.jpg"></figure></td><td>Valentine&#39;s Day Edition NEW! FREE!</td><td><a target="_blank" href="https://makerworld.com/en/models/152374" rel="nofollow noopener">MakerWorld</a></td></tr><tr><td style="padding: 0px"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_491754b41e8de.jpg"></figure></td><td>Thanksgiving Edition</td><td><a target="_blank" href="https://than.gs/m/964381" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1629286" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_91dffdceaa6a6.jpg"></figure></td><td>Mace Edition</td><td><a target="_blank" href="https://than.gs/m/969867" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1629291" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_be36c48d89bf9.jpg"></figure></td><td>Blade Edition</td><td><a target="_blank" href="https://than.gs/m/973197" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1631360" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_ab638babd38a6.jpg"></figure></td><td>Christmas Edition</td><td><a target="_blank" href="https://than.gs/m/975683" rel="nofollow noopener">Thangs </a>/ <a target="_blank" href="https://cults3d.com/:1648164" rel="nofollow noopener">Cults</a></td></tr><tr><td style="padding: 0px"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000068477/design/2024-01-19_a4dc599028daf.jpg"></figure></td><td>Kusarigama Edition NEW!</td><td><a target="_blank" href="https://than.gs/m/992237" rel="nofollow noopener">Thangs</a> / <a target="_blank" href="https://cults3d.com/:1711103" rel="nofollow noopener">Cults</a></td></tr></tbody></table></figure>&nbsp;Don&#39;t forget to check out my Instagram and YouTube channel for more interesting projects!<a target="_blank" href="https://www.instagram.com/jaatinen3d" rel="nofollow noopener">https://www.instagram.com/jaatinen3d</a><a target="_blank" href="https://www.youtube.com/@Jaatinen3D" rel="nofollow noopener">https://www.youtube.com/@Jaatinen3D</a>

Ringchaku Spinning Fidget Toy

Fidget

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Master Sword Pen

Personal Use

Lars 🙂

ReRollReRoll V2 is now publiced at my account!!! Improved version with stackable spools!With this simple design you can reuse your unused BAMBU Spool and turn it into a cool, customizable desktop storage.U can store whatever you want in the boxes. Some ideas: USB’s, Paperclips, Battery’s, SD cards, Bolts, Coins, ect… Or other small items laying on your desk.Assembly<ul><li>Remove the cardboard ring from the spool.</li><li>Place a card of your choise in de cardholder on the Top Ring.</li><li>Place the Top ring on the spool half with the material tag.</li><li>Place the bottum ring on the egde of the other spool half.</li><li>place the small ring on the half which has the little stud.</li><li>Put the boxes on to of the bottum half.</li><li>click the top half in place to lock the boxes</li><li>Give it a good shake! Everything should stay right in place!</li><li>Enjoy!</li></ul>BoxesI’ve made 7 different boxes, 30, 45, 60, 90, 120, 150 & 180 degrees. This means you have the possibility to combine the boxes that you need! As long as it is max 360 degrees.For example, 12 x box 30. 4x box 90 or 2x box 60 + 1x box 120 + 2x box 45 + 1x box 30.I’ve made 2 versions of the boxes, one with text “BOX (degrees)”. And one blank.PrintThe design is easy to print with PETG and PLA, I recommend to make the boxes out of PETG as this gives it a lot more strength.I’ve included 4 cards you can place on the spool to keep track what’s inside. Pick the one that you need. Or make your own with the sign tool Bambu provides. Dimensions: 54,8mm x 33.8 X 1,4mm Radius 4,5mm.FeedbackTips are always welcome! If you find or miss something let me know and I will help you =).