user_3321499145

Sitsero

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;The Model is 142.2x240.01mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm&nbsp;Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments&nbsp;Swap Instructions:Start with BlackAt layer #9 (0.8mm) swap to BlueAt layer #12 (1.04mm) swap to YellowAt layer #18 (1.52mm) swap to Jade White for the rest.

Umbreon looking up to the moon ( Hueforge )

Hueforge

Aliko

This adapter is used for preventing the AMS coupler to overbend. My coupler was bending too much and PFTE tubes were coming out because of filament stuck. This part completely solved the issue. Please note that you should take apart the tubes or coupler to assembly this adapter.

A1 & A1 Mini AMS Coupler Easy-fix Adapter

A1配件

maker_f

A low poly heart model, can be used also as a vase

Low Poly heart

MSUWID

Copic Holder

用品

普朗克-凯

<h2>Four Noble Persons traditional Chinese lantern（四君子中国传统灯笼）</h2><h3> </h3><h3>Introduction(简介)</h3>The "Four Gentlemen" refer to the following plants: plum blossom, orchid, bamboo, and chrysanthemum. They are regarded as the "Four Gentlemen" with each representing a specific quality: pride, elegance, modesty, and leisure, respectively. Referred to as the "Four Gentlemen ," they symbolize the aspirations of the Chinese people and are commonly depicted in poems, writings, and artworks as an allegory for various virtues.You can see their figures on this lantern, and I hope you also like them. Wishing you a delightful time.&nbsp;【“四君子”分别是指：梅花、兰花、翠竹、菊花。被人称为“四君子”，其品质分别是：傲、幽、澹、逸。“四君子”成为中国人借物喻志的象征，也是咏物诗文和艺人字画中常见的题材。你可以在此灯笼上看到它们的身影，希望你们也喜欢它们，祝你们玩的愉快。】<h3> </h3><h3>Printing Instructions（打印注意事项）</h3>To illuminate the lantern, you need to have the LED Lamp Kit-001. If you have already printed the LED Lamp 001, you can disregard the following content.<ul><li>Purchase LED Lamp Kit-001</li><li>Search for the model of LED Lamp Kit-001 on MakerWorld. You only need to print the LED base.</li></ul><figure class="image image_resized" style="width:26.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_398a70a57cdbd.png"></figure>&nbsp;【为了让灯笼亮起来，您需要拥有001号LED灯套件，如果你已经打印了LED Lamp 001那么下面的内容可以忽略。<ul><li>购买001号LED灯</li><li>在makerwolrd里搜索001号LED灯套件模型，只需要打印led底座即可】</li></ul>&nbsp;I really like the built-in textured PEI print bed of the P1S. If the model's outer surface is flat, I often directly print it on the print bed without using a raft, and this allows me to achieve a good surface finish without activating the bed heating. When printing, please:<ul><li>Clean the oil stains on the print bed to prevent poor adhesion of the printed parts.</li><li>When printing the first layer, I often activate the silent mode, significantly increasing the probability of achieving a perfect first layer.</li></ul><figure class="image image_resized" style="width:50.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_aea6fd67f8893.png"></figure>【我非常喜欢P1S自带的纹理PEI打印板，如果模型的外表面是平面的话，我经常把外表面就直接打在打印板上，这样就不需要开启熨烫，就能获得比较好的表面，打印时请：<ul><li>清理打印板上的油污，避免打印板粘不住打印件</li><li>打印第一层时，我经常开启静音模式，大大提高获得完美首层的概率】</li></ul><h3> </h3><h3>Assembly Instructions（组装注意事项）</h3>This is everything printed out. You also need to prepare a roll of double-sided tape.<figure class="image image_resized" style="width:75.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_882b71f8a1db4.png"></figure>【这是打印出来的所有东西，您还需要准备一卷双面胶】&nbsp;Step 1: Affix the 3D image onto the red border, paying attention to the orientation.<figure class="image image_resized" style="width:76.43%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_76ba013d00ea4.png"></figure><figure class="image image_resized" style="width:75.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_0b6299a48ffde.png"></figure><figure class="image image_resized" style="width:75.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_950d6f10ba1b3.png"></figure>【第一步：将立体图片贴在红色边框上，请注意方向】&nbsp; Step 2: Install the LED light.It might be a bit tight; you may need to apply some force.<figure class="image image_resized" style="width:76.62%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_bdd9ada34c332.png"></figure><figure class="image image_resized" style="width:75.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_6cbc5dae620c4.png"></figure><figure class="image image_resized" style="width:75.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_f78c90efd42e2.png"></figure>【第二步：安装led灯，可能有些紧，需要用力】 Step 3: Insert the red border into the base; you may need to apply some force..<figure class="image image_resized" style="width:74.32%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_1383af3e608e8.png"></figure><figure class="image image_resized" style="width:77.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_e8f70a777e87d.png"></figure>【第三步：将红色边框插在底座上,可能有些紧，需要用力】&nbsp; Step 4: Install the lantern top. It might be a bit tight, so you may need to apply some force.&nbsp;<figure class="image image_resized" style="width:76.27%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_e8ad12679e802.png"></figure>【第四步：安装灯笼顶,可能有些紧，需要用力】&nbsp; Mission accomplished!<figure class="image image_resized" style="width:76.63%;"><img src="https://makerworld.bblmw.com/makerworld/draft/493250/2024-02-04_54865a1899ce4.png"></figure>&nbsp;【大功告成】&nbsp;&nbsp;&nbsp;

Four Noble Persons traditional Chinese lantern（四君子中国传统灯笼）

红米30w无线快充（MDY-14-ES）手机支架

红米30w无线充电器支架

支架

vitaprint 3D

This is a perfect Box for your Bambu Lab Spare Parts. I made all Bambu Lab printer Models to a Lid Design.You need foloowing Screws to complete it:&nbsp;<ul><li>M3 x 30 = 4 pcs (for the Hinges)</li><li>M3 x 35/40 = 2 pcs (for the Handle)</li></ul>&nbsp;Big Box:230 x 210 x 70<a target="_blank" href="https://makerworld.com/en/models/105260" rel="nofollow noopener">https://makerworld.com/en/models/105260</a>230 x 210 x 140<a target="_blank" href="https://makerworld.com/en/models/92348" rel="nofollow noopener">https://makerworld.com/en/models/92348</a>&nbsp;Small Box:175 x 130 x 110:<a target="_blank" href="https://makerworld.com/de/models/97173" rel="nofollow noopener">https://makerworld.com/de/models/97173</a>175 x 130 x 70:<a target="_blank" href="https://makerworld.com/de/models/408354" rel="nofollow noopener">https://makerworld.com/de/models/408354</a>

Bambu Lab Box L A1 Mini / P1S / A1 / P1P / X1C

工具

Proline

使用3D打印制作Oled盖板，替换原设计的亚克力盖板，配上3D打印的外壳和定位板可完全省去定制亚克力我在孔里面用烙铁烫了铜柱，规格为m2*6，供参考

Hueforge

A1配件

心

用品

灯

支架

工具

键盘