user_3298404601

Binrux3D

&nbsp;&nbsp;&nbsp;Model:&nbsp;Crazy desk marble fidget toy! This took way too long to design and prototype, I hope it shows!&nbsp;Printing:&nbsp;Use provided print profiles for best results! I&#39;ve tested sizes down to 35% which have still worked, but I&#39;m only including the 100% and 50% versions as print profiles. If you want the 35% or 75% feel free to scale the print profile, or download the included STL:s.&nbsp;Print profile which is full sized is actually scaled to 98% of the original model so it can fit A1 mini plate. full sized ball is also scaled to 98%. Either way this model works with pretty much any scaling (down to 35%)! Just add the same scale to the ball and model and you should be golden!&nbsp;Print does not require any supports or assembly. Works straight out the bed!&nbsp;!IMPORTANT!&nbsp;The ball needs to be cleaned after printing from all of the support residue. Use side cutters or a knife to get it round!&nbsp;Hope you enjoy the model!&nbsp;BONUS&nbsp;Check out my latest marble creations! &nbsp;<a target="_blank" href="https://makerworld.com/en/models/464194#profileId-372921" rel="nofollow noopener">Crazy Marble Fidget Toy V2</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-05-14_cc9d379e79ec.gif">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/441052#profileId-346770" rel="nofollow noopener">Smooth Marble run:</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-04-25_7fbdd6872b67e.gif">&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/450626#profileId-357615" rel="nofollow noopener">Crazy Skeleton Marble Track:</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-05-02_cd1ede4a92837.gif">&nbsp;

Print in place - Crazy marble fidget toy - no sup!

玩具

Matthew Ghost

NEW IMPROVED VERSION <a target="_blank" href="https://makerworld.com/en/models/415150#profileId-317228" rel="nofollow noopener">TILT PHONE STAND V3.0</a>&nbsp;The stand allowing you to comfortably and securely hold your mobile phone at the optimal viewing angle.<ul><li>Designed for printing completely without supported!</li><li>You will need glue (Superglue for plastics). It is necessary to connect the parts (02_Gear_Stand_Left + 03_Gear_Stand_Right) together.</li><li>Its possible that the gap between the base and the tilt gear will be too large. This will cause a slip. To prevent slipping, I recommend sticking the electrical tape on the guide (Base). Or you can also add a layer of glue on the contact surface and let glue dry.</li><li>Otherwise, if the connection is too rigid, it is necessary to grind the contact surface.</li></ul><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2023-12-16_fe804a401913c.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/818723/2024-01-10_dac2c51f4fc07.jpg">

玩具

小工具