mbrine

Faran3D

Jack Skellington Full Head Mask&nbsp;This mask has full head coverage consisting of a front and back half which uses a bit of elastic strap for the top hinge and includes two hooked side pins which slide on one side and then swivel into place to connect the front and the back together. There are large eye holes which allow plenty of ventilation to breathe, but will allow your face to be seen - I wore a black full face/head mask but you can glue buckram or mesh over the holes instead.&nbsp;Supports for the face are unavoidable, but I was able to print the back with no supports. It had some stringing so if you want a perfect print please add supports.&nbsp;You may notice that the mask is hand painted in the photos, and that's because I didn't have an AMS at the time. I have now painted this for a two color print have made this AMS print available. If you want a single color print and happy to paint the black yourself, go for it!&nbsp;Please see my other uploads for the Bat Tie to go with this costume, and I will look into adding the bone skin I had to modify to make the articulated finger extensions fit properly. We also have a full head Pumpkin King mask which I'll upload soon!&nbsp;Please like and tell your friends about this design. If you would be so kind as to share your results, I'd love to see how you got on!As always, please rate this print so others know how awesome it is :)&nbsp;If you'd like to buy me a coffee to support this and future projects, I'd really appreciate it!  https://www.buymeacoffee.com/faran3d

Jack Skellington Full Head Mask - Nightmare Before Christmas

Halloween

chippwalters

Use my print profile for best results, I cannot guarantee print profiles by others.&nbsp;Here are 18 different Christmas ornaments that print really fast: under 2 hours for each plate of 9 ornaments. Only 3 filament swaps total per print. Two different build plates.The 3mf file has all the filament changes built in.&nbsp;Print at 100% infill with a layer height of 0.2mm with a base layer of 0.2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic BambuLab Green Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 4Swap Instructions: Start with Charcoal At layer #7 (1.4mm) swap to Scarlet Red At layer #12 (2.4mm) swap to BambuLab Green At layer #19 (3.8mm) swap to Ivory White for the rest.  &nbsp;

18 different Christmas Ornaments for A1-mini and Bambu 

Christmas

hYPERfOCUS

New 20 gear model: <a target="_blank" href="https://makerworld.com/en/models/153612" rel="nofollow noopener">https://makerworld.com/en/models/153612</a>&nbsp;I set out to create one of the most versatile, complex, and clean fidget toys to challenge my design and print skills, and because I loved the concept of a 12 gear fidget spinner.&nbsp;The model includes 49 parts, and functions perfectly if your printer is well dialed in.&nbsp;The toy can be used in a number of ways. You can manually spin gears in one hand, or between two hands. You can pinch gears to spin the toy around in your hand, or spin the toy with two opposing gears. It's really quite fun, and serves as a good educational toy for kids as well.&nbsp;Putting it together is simple enough. Each gear has a screw, a washer, and a cap. Pop the screw through the gear, a washer on the back, then screw it into the core of the model. Once you've done that, you can pop the cap onto the gear.

hYPER Fidget Toy - Beveled gear fidget spinner

Toys

miak3D

I hung my honeycomb wall on a cement wall so i needed to use command strips around the entire thing. The original only worked on the top and bottom sides so i rotated the insert piece so that it would fit on the flatt(er) sides as well.

Rotated Longer Command Strip holder for Honeycomb Wall

Honeycomb Storage

peterow

Mountain Range Reflection is a truly stunning piece that looks fantastic in any room!

Mountain Range Reflection Amazing Wall Art 

Other

Harry Porpise

A toolbox case for the A1 and A1 Mini that replaces the old cardboard box. The only assembly needed is to snap the plastic tray into the container. I'm super happy with how this turned out, especially how clean the design on the lid is (taken from the old packaging).&nbsp;Update I: I tightened the fit of the lid.Update II: I slightly loosened the fit of the lid so it can be opened more easily.&nbsp;Happy printing!

Halloween

Christmas

Toys

Honeycomb Storage

Other

Printer Accessories