Torsten Kammer

DjangoCashflow

Embark on a delightful construction adventure with the "Micro Dump Truck Kit," a finely detailed and interactive model that brings the classic dump truck to your tabletop. This engaging kit is perfect for hobbyists, collectors, and young engineers eager to explore the mechanics of a dump truck in miniature form. Features:Kit Card Assembly: Each part of the dump truck is precision-engineered and laid out on a kit card, making it easy to identify and remove the pieces for assembly.Functioning Parts: The truck comes to life with rotating wheels and a tilting bed, providing an authentic look and feel.High-Detail Design: Modeled with meticulous attention to detail, this micro dump truck is a faithful replica of the real thing, from the chassis to the bed.Filament Hinges and Axles: Utilizing filament for hinges and axles, the assembly is simple and seamless—no screws or glue required.Kid-Friendly Project: This kit offers a fun and educational experience for children, helping them develop fine motor skills and an appreciation for mechanical design.Easy Assembly: Clear instructions make the building process a breeze, ensuring a rewarding and enjoyable construction experience without any additional tools.Pure Building Enjoyment: Perfect for hobbyists, model enthusiasts, or families looking for a creative project.  Assemble your own Micro Dump Truck today and take pride in creating a miniature mechanical masterpiece that's more than just a toy—it's a small-scale celebration of design and craftsmanship. Spare Parts can be found in the RAW Files. Now with Multicolor parts for non AMS Printer Assembly Instructions for Micro Dump Truck - Step 1: Main FramePreparation:<ul><li>Gently cut out all the pieces from the kit card. Take special care not to remove the holding pins as these will be crucial for assembly.</li><li>Straighten a piece of filament to be used as the axle and hinge. The straighter the filament, the smoother the assembly will be.</li></ul>Step 1: Assembling the Main Frame Locate the front axle, front, cabin, lights, exhaust and frame parts: <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_e8c3702aaf87.jpeg">Lights and Exhaust Placement:<ul><li>Locate the small holes on the underside of the cabin piece.</li><li>Align the pins of the lights and exhaust pieces with these holes.</li><li>Insert the lights at the front and the exhaust on the side of the cabin, pressing gently until they click into place. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_3d9ff77fab1d2.jpeg"></li></ul>Frame Attachment:<ul><li>Take the main frame part and align it with the front grille piece.</li><li>Carefully push the frame into the grille until it is securely attached. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_a3cda27a6210a.jpeg"></li></ul>Cabin Installation:<ul><li>Find the slot on the front part of the frame, which is designed to hold the cabin.</li><li>Slide the cabin down through this slot, ensuring that it sits flush with the frame. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_e22830b9be403.jpeg"></li></ul>Front Axle Installation:<ul><li>From below the assembly, position the front axle piece so that it aligns with the corresponding slots in the frame.</li><li>Press the axle upwards, making sure that the push pins engage with the underside of the cabin and the frame, locking everything into place. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_813e33188038f.jpeg">  </li></ul>Step 2: Bed AssemblyParts Needed:<ul><li>Top bed part</li><li>Front bed part</li><li>Side bed parts (two pieces)</li><li>Bottom bed part <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_a159c4027979e.jpeg"></li></ul>Assembly Steps:Front Bed to Bottom Bed:<ul><li>Start by taking the front bed part and aligning it with the bottom bed part.</li><li>Carefully insert the tabs of the front bed part into the corresponding slots on the bottom bed part. Press gently until they click into place, ensuring they are fully seated. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_3b305d910b035.jpeg"></li></ul>Attaching the Sides:<ul><li>Next, take the side bed parts and align them with the assembled front and bottom pieces.</li><li>Gently slide the side pieces into the slots, connecting them to both the front and the bottom bed parts. Be cautious during this step to avoid bending the pins. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_8a7a507492e6f.jpeg"></li></ul>Securing the Top Part:<ul><li>Finally, take the top bed part and align it over the structure you've just assembled.</li><li>Press the top bed part down onto the front bed part, ensuring that the tabs click into the slots securely. It should fit snugly and complete the bed of the dump truck. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_3d6ced68ab2a5.jpeg">  </li></ul>Step 3: Securing Bed to Main FrameParts Needed:<ul><li>Main frame from Step 1</li><li>Bed assembly from Step 2</li><li>Filament piece</li><li>Cutting tool <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_8571c0b363389.jpeg"></li></ul>Assembly Steps:Aligning the Bed and Frame:<ul><li>Take the bed assembly you completed in Step 2 and line it up with the main frame from Step 1. Ensure the holes for the hinge on the bed align with those on the frame.</li></ul>Inserting the Filament Hinge:<ul><li>Insert the filament piece through the aligned holes to act as a hinge pin. The filament should go in smoothly but with a snug fit. This will allow the bed of the dump truck to tilt. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_3a0e9c3326f5f.jpeg"></li></ul>Securing the Hinge:<ul><li>Once the filament is in place, check that the bed tilts up and down freely. This will simulate the dumping action of the truck.</li></ul>Trimming Excess Filament:<ul><li>Use the cutting tool to trim any excess filament from both sides of the hinge. Be careful to cut it flush with the frame to prevent any sharp edges.</li></ul>Step 4: TiresParts Needed:<ul><li>Six tires (four with a smaller inner diameter and two with a larger inner diameter)</li><li>Rear axle spacer</li><li>Two wheel caps</li><li>Filament piece</li><li>Optional: Glue <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_9866d769fd27e.jpeg"></li></ul>Assembly Steps:Wheel Cap and Filament Axle:<ul><li>Take one wheel cap and slide it onto one end of the filament piece. This will act as a stopper for the wheels. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_a607f2ca94359.jpeg"></li></ul>Attaching Rear Wheels:<ul><li>Slide the two tires with the smaller inner diameter onto the filament piece, up against the wheel cap you just attached. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_902ba28f4d0ce.jpeg"></li></ul>Inserting Rear Axle Spacer:<ul><li>Position the rear axle spacer between the frame parts at the rear of the dump truck. It should fit snugly and help to maintain the correct distance between the wheels.</li></ul>Securing Rear Wheels to Frame:<ul><li>Guide the filament axle with the attached wheels through the rear hub area of the main frame.</li><li>Once the axle is through, attach the remaining two wheels to the protruding end of the filament axle.</li><li>Secure the wheels in place by adding the second wheel cap to the end of the filament. Press firmly to ensure it is snug. If the fit isn't tight enough, you may add a drop of glue to hold the wheel cap in place. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_4de856e34d4b1.jpeg"></li></ul>Attaching Front Tires:<ul><li>Take the tires with the larger inner diameter and press them onto the front axle pins protruding from the main frame. Ensure they rotate freely for smooth rolling action. <img src="https://makerworld.bblmw.com/makerworld/draft/583155/2024-02-23_08aad8271686d.jpeg"> Your Micro Dump Truck is now complete. Well done! It's a neat little project to finish, and I hope you find it a satisfying addition to your collection or as a fun toy. Enjoy your craftsmanship.</li></ul>&nbsp;

Micro Dump Truck Kit Card - Liebherr 284 T

Modelle div. Maßstäbe

JohannR

Kupplungsverlängerung für Spur G. Diese Verlängerung eignet sich um handelsübliche Drehgestelle oder Achsaufnahmen von LGB und Piko für eigene Projekte zur verlängern, so dass der Abstand bei Wagen mit größeren Überhängen wieder passt.&nbsp;Coupler extension for G gauge. This extension is suitable for extending standard LGB and Piko bogies or axle mounts for your own projects, so that the distance fits again for wagons with larger overhangs.

Spur G / G Scale Kupplungsverlängerung / Coupling Extension LGB PIKO

Spur G interessant

The Pendragon

Bahnsteigkante für Spur N (1:160)&nbsp;Gedruckt mit grauen PLA von der <a target="_blank" href="https://recyclingfabrik.com/shop/rpla-filament/" rel="nofollow noopener">Recyclingfabrik</a>.&nbsp;Druckeinstellungen:0.4 mm Nozzle (geht evtl. besser mit einer 0.2 mm Nozzle)Layerhöhe 0.08 mm&nbsp;Maße:Länge: 150 mm + 2* 20 mm Seitenteile Links & RechtsHöhe: gesamt 6,2 mm, 2 mm über SO (entspricht ca. 380 mm über SO in der Realität)

Bahnsteigkante Modellbahn Spur N 1:160 / N Scale platform edge

Spur N interessant

Hanti_3d

<h2>A simple filament clip which prevents the filament from unwinding reliably!</h2> I&#39;ve tested many filament clips in the past, but couldn&#39;t find one that I was 100% satisfied with. Out of this need I have designed this small clip!<h4> Fast and easy to print, prevents filament tangling for ALL spools!  </h4>Recommended to print the clip with regular PLA. Only requires 1 gr of filament an 4 minutes of print time!<h4> Recommend to also check my lastest version:<a target="_blank" href="https://makerworld.com/en/models/490880#profileId-404364" rel="nofollow noopener"> https://makerworld.com/en/models/490880#profileId-404364</a>  </h4>

Modelle div. Maßstäbe

Spur G interessant

Spur N interessant

Tools interessant