user_3258190104

Wojciech Kawa

For dragon lovers, I have prepared an extruder front for A1 and A1 mini printers. The dragon turns its eye while printing.<h4>Before you start printing, make sure you have a clean plate (Wash it in warm soapy water or IPA). The first layer has a lot of small elements that must stick well to the plate.</h4>Colors I used to print the dragon:<ul><li>Galaxy Purple,</li><li>Lilac Purple,</li><li>Red,</li><li>White.</li></ul>Secound Version:<ul><li>Dark green,</li><li>Light Green,</li><li>Red,</li><li>White.</li></ul>If you think the dragon should have different colors, please show others what it looks like in other colors.&nbsp;Let me know if the print was successful and if everything fits. If any corrections need to be made, let me know. If you have printed it, please leave a rating.&nbsp;Before installation, the original front and the rotating element must be dismantled. During installation, the eye should be pressed as far as it will go. After putting the face, the eye should be flush with the face or deeper. When assembling, make sure that the top latches are flush with the top edge before pressing from the front. See my other projects.&nbsp;Assembly instructions below. (same as Funy Face)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/411989/2023-12-19_a1ede8a515cf8.jpg"></figure>&nbsp;

A1 and A1 mini Dragon Eye

工具类

Binrux3D

&nbsp;&nbsp;&nbsp;Model:&nbsp;Crazy desk marble fidget toy! This took way too long to design and prototype, I hope it shows!&nbsp;Printing:&nbsp;Use provided print profiles for best results! I&#39;ve tested sizes down to 35% which have still worked, but I&#39;m only including the 100% and 50% versions as print profiles. If you want the 35% or 75% feel free to scale the print profile, or download the included STL:s.&nbsp;Print profile which is full sized is actually scaled to 98% of the original model so it can fit A1 mini plate. full sized ball is also scaled to 98%. Either way this model works with pretty much any scaling (down to 35%)! Just add the same scale to the ball and model and you should be golden!&nbsp;Print does not require any supports or assembly. Works straight out the bed!&nbsp;!IMPORTANT!&nbsp;The ball needs to be cleaned after printing from all of the support residue. Use side cutters or a knife to get it round!&nbsp;Hope you enjoy the model!&nbsp;BONUS&nbsp;Check out my latest marble creations! &nbsp;<a target="_blank" href="https://makerworld.com/en/models/464194#profileId-372921" rel="nofollow noopener">Crazy Marble Fidget Toy V2</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-05-14_cc9d379e79ec.gif">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/441052#profileId-346770" rel="nofollow noopener">Smooth Marble run:</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-04-25_7fbdd6872b67e.gif">&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/450626#profileId-357615" rel="nofollow noopener">Crazy Skeleton Marble Track:</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-05-02_cd1ede4a92837.gif">&nbsp;

工具类

玩具