user_3235955873

LMaker87

I love the X1C design, so I wanted to create a similar enclosure for my A1 Mini.&nbsp;Premise, I know that the A1 Mini is not created to work in an enclosure etc, but I closed it only whene the print is out of service to protect from dust etc and for only my estetical pleasure, when it works I keep the door and the roof open.&nbsp;The project currently is about just the enclosure and not of AMS and its management, an update will follow that will only touch the rear panel to incorporate the PTFE from AMS.(I must verify some parameters befer to release that).&nbsp;The mounting of chassis is easy, all are interlocking peaces and their fixing is renforced by glue, below what I used:&nbsp;<img class="image_resized" style="width: 19.84%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_38c96ef5903348.png">&nbsp;<img class="image_resized" style="width: 20.12%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_15339be7580c.jpg"><img class="image_resized" style="width: 20.34%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_ba144ddf408918.png">&nbsp;<img class="image_resized" style="width: 25.26%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_f5316f65506ef8.jpg"><img class="image_resized" style="width: 28.05%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_485c2b45f7c298.jpg"><img class="image_resized" style="width: 26.09%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_9c6cdda704b628.jpg">&nbsp;For the panneling, I used the 3mm Dibond material below an example photo,&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_21f9bc27c14a58.jpeg">I cut it of the mausere needed, I prefer don&#39;t say the measure, when you glued all peaces of chassis, is better that you take the meause alone to cover better the dettail, below a picture of all cover needed. &nbsp;<img class="image_resized" style="width: 28.67%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_70d4717a38e67.jpg">while for the roof and the door I use a policarbonato always of 3 mm also it cutted after the chaissis is glued, to have more dettailed measure.&nbsp;<img class="image_resized" style="width: 29.08%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_72e7b7e629f6f8.jpg">&nbsp;in the end for the door hinges I used a Pin like in the photo belw (usually used for shelves) diameter 5 mm and for the handle a magnet of 10 mm diameter.&nbsp;<img class="image_resized" style="width: 26.82%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000481343/design/2024-06-01_5b1221a9e2bcd8.png">&nbsp;&nbsp;&nbsp;&nbsp;

Enclosure for A1 Mini

SeaSpotter

I modified the original Decontaminator to use with the Bambulab A1 mini silicon brush, more reliable and robust than the brass brushes.I also modified the bucket to be smaller on the inner side to mount different Wago mounts.All you need is all print files (print in ASA or ABS best as it is close to the heatbed). The only thing you need to modify is the "spacer" to your desired size.I added 1, 2 and 3mm spacers but you can modify in your slicer to your desired needed size.For my Voron 2.4 the intermediate plate needs to be 2mm, but just adjust the height of this plate to your printer needs in your Slicer.BOM:4x M3x8 SHCS2x M3 T-Nuts4x 6x3mm magnets2x M3 Threaded Insert (M3x5x4 / Voron type)1x Bambulab A1 mini nozzle wiper (<a href="https://eu.store.bambulab.com/de/collections/accessories-for-a1-mini/products/heatbed-nozzle-wiper-a1-mini" rel="nofollow">https://eu.store.bambulab.com/de/collections/accessories-for-a1-mini/products/heatbed-nozzle-wiper-a1-mini</a>)