xonggg

Simple mould with rounded corners to cast a base slab for your 3D printers. &nbsp;Do note that for best effect, a layer of foam/rubber is required to act as the dampener.&nbsp;Intructions:<ol><li>Print 4 pieces of “Concrete_Mould_Piece.STEP" - Each takes ~100g of filament.</li><li>Assemble them together and tape them together at the bottom</li><li>OPTIONAL - seal the gaps and seams with silicone</li><li>Apply mould release if you want to have a chance at reusing your moulds</li><li>Pour cement and lay fibre reinforcement</li><li>Wait for it to cure and remove concrete slab</li></ol>

Concrete Slab Mould - Vibration/Sound Dampening Base for 3D printers

yard

phyXoo

70% scale model0,2mm layer height0,2mm Top Z distance Smoothened Top surfaces &nbsp;Supports are easy to remove.

Mudkip - Pokemon

painting

Underground Tabletop

Dice for your Warhammer 40k battle when playing Dark Angels.&nbsp;16x16x16mm Dice&nbsp;2 Print profiles available:A - One colour die with hollow logo/dimpels for speed (~45 min.)B - Dual-colour die with solid logo/dimpels (more filament changes/time ~8 hours)&nbsp;This print profile has more rounded corners and colourized with classic dark green.This is printed solid to give it some weight.If You need other dice then DM a request.&nbsp;Thanks for Your support :-)

Warhammer 40k - Dark Angels dice

minis

Danrusso

The Krampus is an old Christian character from old world Catholic Christmas traditions. The Krampus is one of the variations of St Nicholas’s helpers; a tradition where another character is assigned St Nicholas’s naughty list duties. The Krampus is a horned <a target="_blank" href="https://en.wikipedia.org/wiki/Anthropomorphism" rel="nofollow noopener">anthropomorphic</a> goat figure with one human foot and a very long tongue who, in Central and Eastern <a target="_blank" href="https://en.wikipedia.org/wiki/Alps" rel="nofollow noopener">Alpine</a> <a target="_blank" href="https://en.wikipedia.org/wiki/Folklore" rel="nofollow noopener">folkloric tradition</a> Christianity, is said to accompany <a target="_blank" href="https://en.wikipedia.org/wiki/Saint_Nicholas_(European_folklore)" rel="nofollow noopener">Saint Nicholas</a> on visits to children during the night of 5 December (Krampusnacht; &#34;Krampus Night&#34;), immediately before the <a target="_blank" href="https://en.wikipedia.org/wiki/Feast_of_St._Nicholas" rel="nofollow noopener">Feast of St. Nicholas</a> on 6 December. The Krampus knocks on the doors of children’s homes to warn them to be good, or otherwise he will return on Christmas Eve with St. Nicholas. In this tradition, Saint Nicholas rewards well-behaved children with small gifts, while Krampus punishes badly-behaved ones with <a target="_blank" href="https://en.wikipedia.org/wiki/Birching" rel="nofollow noopener">birch rods</a>. Krampus also wears a whisker basket on these visits and will kidnap extremely naughty children after his visit.<a target="_blank" href="https://en.wikipedia.org/wiki/Krampus#cite_note-1" rel="nofollow noopener"> (Wikipedia)</a>

Krampus Mask

costumes

nouzamarek

Roh kempingové skříně CAMP GEAR. Zlepšení celkové stability skříně.

Camp Gear

camping

Desmodromic

Keychain tag for your Electric Vehicle (EV), generator or electrical box. We use the blue one for our Chevy Bolt EUV keys and the red/orange for our generator. Helps keeps things straight on our key rack at home.  When preparing to print, set filament color assignments to whatever colors suit your taste or match your car.&nbsp;Check out my profile for other key chain fobs or tags.

EV Electric Vehicle Keychain

random

Wing-Art

Kitchen Dispenser V2 - now with Quicklock Mount!&nbsp;In <a target="_blank" href="https://makerworld.com/en/models/94119#profileId-100760" rel="nofollow noopener">Version 1</a> of the Kitchen Dispenser, the problem was the wall mount. It was too unstable for heavier and larger glasses. Therefore, in response to numerous requests, the wall mount has been improved. We now have a Quickmount with a lock that operates using a pressable spring mechanism to ensure the kitchen dispenser holds securely.&nbsp;This print file contains the design for a universally applicable kitchen dispenser, specifically developed for use with pickle jars with a diameter of 80 mm or Mason Jars.&nbsp;Compatible Jars for self-printing are <a target="_blank" href="https://makerworld.com/en/models/96064#profileId-102443" rel="nofollow noopener">AVAILABLE HERE </a>for the Standard (Pickle-Jar) Version! The Mason Jar Version is a bonus for your own Mason Jar. There is also an adapter for the standard version (pickle jar) to a wide mouth Mason jar (with 86mm) available in the print profiles! Excellent for storing and easily dispensing various ingredients such as:  <ul><li>Coffee</li><li>Cereal</li><li>Rice</li><li>Cat food</li><li>Pasta</li><li>Lentis</li></ul>…or many other things! Design Features:<ul><li>Flap with Rubber Ring: At the bottom of the dispenser, there is a flap operated by a cleverly integrated rubber ring mechanism.</li><li>Versatile Use: The dispenser is ideal for a variety of dry foods such as coffee beans, cereal, rice, pasta, lentis and other dry ingredients.</li><li>Text Plates: Additionally, the kitchen dispenser can be equipped with text plates for labeling.</li></ul>&nbsp;Note - There are two Versions of the Dispenser:   <ul><li>Standard (Pickle) Version for 80mm Diameter Jars</li><li>Mason Jar Version (als requested in the comments)  </li></ul>If you are printing the Standard (Pickle-Jar) Version , then <a target="_blank" href="https://makerworld.com/en/models/96064#profileId-102443" rel="nofollow noopener">these jars AVAILABLE HERE </a>from me, will fit perfectly!&nbsp;It is highly recommended to print the included test thread if you are printing the Mason Jar Version or if you are unsure. This is to ensure that the thread fits correctly and your jar is compatible with the dispenser.&nbsp;<a target="_blank" href="https://all3dp.com/2/food-safe-filament-brands-compared/" rel="nofollow noopener">HERE</a> you can find the Best Food-Safe PLA Filaments of 2023. Special bonuses:&nbsp;Additional doors:<ul><li>10mm handle (Standard size)</li><li>20mm handle</li><li>30mm handle</li></ul>Adapter:<ul><li>Standard (Pickle-Jar) Version to → Wide Mouth Mason Jar (86mm)</li></ul>Funnel by CD84:<ul><li><a target="_blank" href="https://makerworld.com/en/@CD84" rel="nofollow noopener">CD84</a> provides us with a specially designed funnel for filling the Kitchen Dispenser <a target="_blank" href="https://makerworld.com/en/models/422982#profileId-326091" rel="nofollow noopener">available HERE</a>. Thank you CD84!  </li></ul><figure class="image"><a href="https://makerworld.com/en/models/422982#profileId-326091" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/845762/2024-04-11_77f130538e75a.png"></a></figure>Just take a look at my other Kitchen Tools here:<ul><li><a target="_blank" href="https://makerworld.com/de/models/96064#profileId-102436" rel="nofollow noopener">Printable Jars (compatible with this Kitchen Dispenser!)</a></li><li><a target="_blank" href="https://makerworld.com/de/models/96912#profileId-103376" rel="nofollow noopener">Orange Peeler Citrus Pro</a></li><li><a target="_blank" href="https://makerworld.com/de/models/99747#profileId-106354" rel="nofollow noopener">EGG-citing Nest - the classic Egg Cup</a></li><li><a target="_blank" href="https://makerworld.com/de/models/115132#profileId-123776" rel="nofollow noopener">Bottle-Can Dispenser</a></li><li><a target="_blank" href="https://makerworld.com/de/models/100260#profileId-106926" rel="nofollow noopener">Knife Cat Napkin Holder</a></li><li><a target="_blank" href="https://makerworld.com/de/models/109348#profileId-116818" rel="nofollow noopener">Hexagon Napkin Holder</a></li></ul>&nbsp;

Kitchen Dispenser V2 with Quicklock Mount!

kitchen

Lolly

Start with Black At layer #5 (0.64mm) swap to Sapphire Blue At layer #8 (0.88mm) swap to red At layer #15 (1.44mm) swap to White for the rest.&nbsp;1 Black,purple,sky blue,white&nbsp;2 Black,Sapphire Blue,sky blue,white&nbsp;3 Black,red,orange,white 4 Black, Sapphire Blue,red,white&nbsp;

Monte Fuji - Hueforge

Applejax_Industries

Introducing Roadbites, the modular food station for your vehicle. We went through several revisions and test prints to get this first version as best as it could be. We of course know this may not work for every vehicle out there, but in time we will have different version adaptations to fit more vehicles. This was completed designed and tested using ASA filament, so not sure how fitment may be with other filament types. We look forward seeing how this works for others and different color variations that will be used.&nbsp;There are additional parts needed which are listed in the video, but it would not allow me to type in the parts myself in the non 3d printed parts section.&nbsp;The full assembly video is in the link below and if you really like it, please boost for us!&nbsp;<figure class="media"><div data-oembed-url="https://vimeo.com/941420370?share=copy"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://player.vimeo.com/video/941420370" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allowfullscreen=""></iframe></div></div></figure>

RoadBites Modular Food Station

Introducing the Bum Buddy - your ultimate travel companion for a refreshing clean!&nbsp;Simply screw it onto any standard PET bottle like a bottle cap to get yourself a portable bidet in seconds! With its universal fit, it pairs perfectly with bottles of any size, making it super convenient for your on-the-go adventures.&nbsp;When nature calls, just give your bottle a squeeze, and let the invigorating jet stream of water work its magic. Perfect for those post-&#34;number 2&#34; moments when you need a thorough rinse. Compact and lightweight, the Bum Buddy is a must-have for travelers seeking that extra touch of cleanliness wherever they roam.&nbsp;Prints in about 30 minutes and does not require any supports!&nbsp;隆重推出 Bum Buddy - 您的终极旅行伴侣，让您焕然一新！&nbsp;只需将其像瓶盖一样拧到任何标准 PET 瓶上，几秒钟内即可获得便携式坐浴盆！它具有通用性，可与任何尺寸的瓶子完美搭配，让您在旅途中非常方便。&nbsp;当大自然召唤时，只需挤压您的瓶子，让令人振奋的水流发挥其魔力。非常适合“2 号”后需要彻底冲洗的时刻。 Bum Buddy 结构紧凑、重量轻，是无论在何处漫游都希望获得额外清洁感的旅行者的必备品。&nbsp;打印大约需要 30 分钟，并且不需要任何支撑！&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://paypal.me/xonggg?country.x=SG&amp;locale.x=en_GB" rel="nofollow noopener">If you found this product helpful or enjoyed it, consider buying me a coffee :D</a>Your support helps keep the creative juices flowing! For enquiries: xavierongjh@yahoo.com

Bum Buddy: Travelling Bidet Sprayer for PET bottle

travel

avidus29

A simple honeycomb storage wall holder for the <a target="_blank" href="https://makerworld.com/en/models/60890#profileId-63102" rel="nofollow noopener">Embedded Magnet Dispenser </a>Printed with automatic tree support and 0,2mm layer height standard PLA profile from Bambulab.

HSW Magnet Dispenser Wall Mount

Sven97

<h2>1. Model Overview</h2>This unique design is a lamp or trophy inspired by the aesthetic of the Monument Valley game. It&#39;s fully compatible with the Bambu Lamp Kit 001, making it a versatile and stylish addition to any space.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_b42e7a0db9dd9.jpeg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_fe233cb92472b.jpg"></figure>Compatible Hardware Kit: LED Lamp Kit-001. For more details, visit <a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">Bambu Lab Store</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_821c0729d506c.png"></figure><h2>2. Model Specifications</h2><ul><li>Dimensions: 200mm (H) x 120mm (W) x 100mm (D)</li><li>Weight: ~115g</li><li>Material &amp; Color Recommendations:<ul><li>Main body: Black <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_38c02d7479b6b.png"> or White Marble <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_a5e8b8ceb2c27.png"> is recommended for a architecture finish</li><li>Sign: White <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_2f8f0e4215f7a.png"> is recommended for clarity and contrast.</li></ul></li></ul><h2>3. Printing Parameters</h2><ul><li>Layer Height: 0.20mm is recommended to ensure a smooth finish</li><li>Infill Percentage: 15% for optimal balance of strength and material usage.</li><li>Support/Adhesion: No support</li><li>Plate: A smooth PEI Plate is ideal for this print</li></ul><h2>4. Assembly Instructions</h2>The main architecture is designed in 5 pieces connected via hex-shape pins, it can be printed without any support. While the pin connections are robust, adding glue between layers can enhance stability.&nbsp;Assembly Process:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_4c4e2674a949.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_5d7cae2413a6.jpg"></figure>Step 1: Insert 4 pins into the base.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_6bad4f17fc9e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_d764de29a4039.jpg"></figure>Step 2: Assemble the sides and back parts.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_638fc1be8c1da.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_43fd3365ac0c4.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_fbc5bbf2eca5f.jpg"></figure>Step 3: Place 3 pins on the top of the side and back parts<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_c133fef77186b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_fd4a658f787b8.jpg"></figure>Step 4: Attach the pillar with its pin<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_e5d569b359d99.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_78f9aec0cd5d1.jpg"></figure>Step 5: Fit the top part into place<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_d079c09aaa92c.jpg"></figure>Step 6: Insert the award sign into place<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_a1ceb0d0866ed.jpg"></figure>Step 7: The LED base, originally from the <a target="_blank" href="https://makerworld.com/en/models/39480#profileId-38673" rel="nofollow noopener">Halloween Jack-O’-Lantern</a> model, can be reused here. So you can save some printing time if you already printed this. Secure it by pushing and rotating counter-clockwise from the top.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_7af9b6bde9a2d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/7c6e827f-3eaa-4a82-a753-60ad23ccd6b4.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_48488126ffd59.jpg"></figure>Additional Customization:<ul><li>Print and add figures like Prince Ida and Crowman at 50% size from <a target="_blank" href="https://www.myminifactory.com/users/FORGE%203D" rel="nofollow noopener">Martin Moore</a>. A bit of glue can secure them to the structure.<ul><li><a target="_blank" href="https://www.myminifactory.com/object/3d-print-monument-valley-princess-ida-23797" rel="nofollow noopener">Prince Ida Model</a></li><li><a target="_blank" href="https://www.myminifactory.com/object/3d-print-monument-valley-crowman-23795" rel="nofollow noopener">Crowman Model</a></li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_108859e1dd2d.png"></figure><blockquote>For Ida model, it seems that the pegs to join them are missing. So I just use a little bit glue during the assembly. For this 50% size, glue is necessary anyway. Please refer comments to get more information for printing and gluing.</blockquote>And TA-DA, there you have it!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-20_d93268a97db77.jpg"></figure>Sign Customization:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_1798cdfbec431.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_7e51aa4e43de2.png"></figure><h2>5. Gallery of Finished Prints</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_f9a52b11701c7.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_339db12b02702.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_66775ec13f31a.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-01-10_faa1a2326fb48.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-29_089875d52190f.png"><figcaption>by <a target="_blank" href="https://makerworld.com/en/u/2761194044" rel="nofollow noopener">@ida.liu21</a></figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-31_4b1e2c922584f8.jpg"><figcaption>by <a target="_blank" href="https://makerworld.com/en/u/1236710988" rel="nofollow noopener">@Jorple</a></figcaption></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2023-12-25_4c830268a981e.jpg"><figcaption>by <a target="_blank" href="https://makerworld.com/en/u/2005363420" rel="nofollow noopener">@JoveA1mini</a></figcaption></figure><h2>6. Version History and Updates</h2><ul><li>2024/01/10 Update<ul><li>Update document</li><li>Add instructions for customize the sign</li><li>Add finished prints images</li></ul></li><li>2023/12/20 Update<ul><li>Initial upload.</li></ul></li></ul><h2>7. Support Me</h2>Illuminate Your Space with Monument Valley Charm and Fuel Design Creativity with a Coffee<a target="_blank" href="https://buymeacoffee.com/sven97" rel="nofollow noopener">Buy me a coffee</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000101386/design/2024-05-16_f8a06524896668.png"></figure>

Monument Valley Lamp Trophy with Bambu Lamp Kit

gifts

Sakkez Games

ONLY IPHONE 15 PRO&nbsp;Cover to be used only for Iphone 15 PRO Does not fit all other Iphones Print it with a soft material such as TPU or PETG&nbsp;Hexagon design allows you to see the colour of the body of your Iphone 15 at its best&nbsp;I printed a copy for a friend in PLA, but it might crack over time…you decide what to useClean the plate well before printing....if you have doubts about adhesion use 5mm of brim&nbsp;Please if you print it post the picture and like it. follow me to help me continue with the projects&nbsp;&nbsp;

Iphone 15 PRO - Cover Hexagon design

electronics

Replica4292

<h2>Description</h2>Gridfinity bins with magnet support, that print in vase mode as a single part. No separate top and bottom part that has to be glued together. Inspired by this great design: <a target="_blank" href="https://www.printables.com/model/428220-large-gridfinity-vase-mode-bins" rel="nofollow noopener">https://www.printables.com/model/428220-large-gridfinity-vase-mode-bins</a>&nbsp;The filenames are in the format VaseBin_[width]x[depth]x[height].stl. One width or depth unit corresponds to one bin and one height unit to 7mm, as defined in the original specification. The default height is 6 units.&nbsp;The size for the magnets is 6x2mm and they have to be glued.&nbsp;<h4>Print Settings</h4>The bins print with vase mode enabled. Additionally you have to adjust the number of bottom layers (30 for a 0.2mm layer height). This ensures, that the bottom non vase part is printed correctly (see also the published sample profile).&nbsp;Bambu Slicer<figure class="image image-style-align-left"><img src="https://media.printables.com/media/prints/665946/rich_content/4ddfce88-85fe-4476-bdaf-2476828a96b9/bambu_slicer_bottom_layers.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<h4> </h4><h4> </h4><h4> </h4><h4> </h4><h4>Further Notes</h4>I am considering to also create versions with label support. Please Let me know in the comments if you are interested!

Gridfinity Magnetic Vase Bins Single Parts

gridfinity

mcgybeer

Articulated Cobra! Includes 2 versions of a Pencil Holder, with and without texture. The Cobra can be rolled both upwards and downwards!Cobra and Pencil Holder are able to print in place with no supports. Feel free to scale it up or down as much as you want (the limit is your printer).&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/LxwNxV0ia_A"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=LxwNxV0ia_A"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/LxwNxV0ia_A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>

Articulated Cobra + Pencil Holder

toys

Luke

Gridfinity storage for A1 series nozzles. The uploaded profile was printed in ABS/ASA but any regular filament should work fine.&nbsp;Original Onshape CAD is <a target="_blank" href="https://cad.onshape.com/documents/59b2c3dd3a60fc3d66f129ea/w/f672d5f3de6740f5509f73cd/e/8bb9dc457d68d043c91b4991?renderMode=0&uiState=65a5ac343f099e1e33431656" rel="nofollow noopener">available here</a>.

Gridfinity storage for A1 nozzles

printer

peteb

Opposite polarity magnet applicators. 8mm x 2mm, I glued in magnets of opposite polarity to easily pick up magnets and press them into your builds, ensuring the correct polarity.

Magnet applicator

tools

emmaginn

Wanted to see if I could come up with something for the Pill Organizer model contest. Was a lot of fun to make. This is a Days of the Week pill dispenser. You'll need seven small rubber bands for the spring back mechanism. I used some rubber band hair ties my wife had laying around, but I'm sure most any small rubber band would do. Only other thing you need to do is super glue the “Day Back” piece the the back of the days of the week blocks. This just helps them so that they won't fall out of the front. This was a lot of fun to make and I hope someone likes it and can get some use out of it. Enjoy!