B L A N K

marcusj2001

This gun plaque is specifically designed for multi color prints. I have included a pre-colored project.Bullets are sized to spec for 45, 5.56 and 7.62!Perfect for any gun owner!

"You Can Take My Guns Bullets First" Plaque

wazza10

Articulated hydra, print in place, no supports

Articulated hydra

Articulated

christofer.jh

The one ring, need I say more?&nbsp;Hang on the wall or just put it on a table. The ring is a whole 160mm in diameter!&nbsp;I printed with Bambu PLA silk - Gold.&nbsp;<h2>Current version 2.0 - Now better shine!</h2>Warning, the new back plate is much more secured when inserted. Make sure led is installed before closing.&nbsp;The assembly is easy, just take about 50cm led strip and put it in the ring, like this:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-02-14_9d0f0db27d1.jpg"></figure>Or alternative slide it in above the internal “bride”, this way you can get two loops for more light.&nbsp;Holder remixIf you want a stand take a look at this remix: <a target="_blank" href="https://makerworld.com/en/models/467240#profileId-376287" rel="nofollow noopener">https://makerworld.com/en/models/467240#profileId-376287</a><h3>Revisions:</h3>v 2.0Total redesign of the inner space of the ring and the back plate. The led strip is now held in place which gives a more uniform shine. Slightly bigger radius on the top of the ring.The back plate also snaps to the ring better, DON&#39;T PUT ON UNTIL LED IS INSERTED.v 1.1<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-30_7d6ab2acdbc06.jpg"></figure><ul><li>Added a optional back plate that snaps in place. Use the chord for hanging on wall, or drill a hole for a nail (or use bambu studio and add a hole)</li></ul><figure class="image image_resized" style="width: 23.9%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-31_2e6cf6cbfd73d.jpg"></figure><figure class="image image_resized" style="width: 24.71%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163169/design/2024-01-31_e9eca6e2a85f3.jpg"></figure>

The one ring - The Lord of the Rings

lightboxes

standitupstore

Faceshell with magnetic lenses perfect for cosplay

Spiderman Face Shell TASM2 magnet ready

helmets

pbbence1994

A fairly accurate kit card model of a Bell 206B Jetranger helicopter.With it's beautiful multicolor paintjob looks good as desk decoration, but it can also serve as a fidget toy, because the props can spin pretty satisfiingly well. Cut the part out with pliers or nail sissors. The assembly is easy and self explanatory. Have fun printing it!&nbsp;

Helicopter Kit Card (Bell 206B Jetranger)

kit cards

sulleyneal

I just had to have a stone to go with the sharpie sword!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/139849#profileId-152435" rel="nofollow noopener">sword handle found here</a>

Sharpie Sword Stone

goofy shit

Fix3D

This is a remix of the <a target="_blank" href="https://makerworld.com/models/24775" rel="nofollow noopener">X3D-v3 Riser | Bambu Lab X1/P1 AMS Stand</a>, it is without the hole for cables in the back, for P1s or P1p it isn`t needed. U can use the original Plug for LED Light if you have the P1s / P1p or X1. For the LED u don`t need an extra Model to print as it is in the original one. just choose the right Led for your printer, you can turn the led off and on with the app / or printer and it is not continuesly on like it is with the usb portI printed it in PETG-CF&nbsp;use LED Light: <a target="_blank" href="https://de.aliexpress.com/item/1005005946567893.html?spm=a2g0o.productlist.main.51.b93895yC95yC4E&algo_pvid=45c1b1fd-eaaf-41d5-bb7b-7a0fc1fbde44&algo_exp_id=45c1b1fd-eaaf-41d5-bb7b-7a0fc1fbde44-25&pdp_npi=4%40dis%21EUR%214.62%210.46%21%21%214.91%210.48%21%40211b612817056484385317409eb604%2112000034975715120%21sea%21DE%210%21AB&curPageLogUid=vjynWtr9TjhT&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">https://de.aliexpress.com/item/1005005946567893.html?spm=a2g0o.productlist.main.51.b93895yC95yC4E&algo_pvid=45c1b1fd-eaaf-41d5-bb7b-7a0fc1fbde44&algo_exp_id=45c1b1fd-eaaf-41d5-bb7b-7a0fc1fbde44-25&pdp_npi=4%40dis%21EUR%214.62%210.46%21%21%214.91%210.48%21%40211b612817056484385317409eb604%2112000034975715120%21sea%21DE%210%21AB&curPageLogUid=vjynWtr9TjhT&utparam-url=scene%3Asearch%7Cquery_from%3A</a>

X3D-v3 Riser Bambu Lab P1S P1P X1 with LED Lighting AMS stand Glass

Printer stuff

fencko-scherrens

this is a 3d model from the Zuk slayer helm (grandmaster tasks) from osrs. The most elite helm ingame. Yet to be printed, will soon try. Will add photo's of printed product

OSRS Zuk slayer helmet (desk ornament)

osrs

Ocular Dynamic

Cool retractable karambit knife remix of a remix originally of cat claw box cutter. I'll have a profile that all one color and a 2nd profile with 2 plates, body separate from links so you can make them different colors if you wish.&nbsp;I only put supports for the hex nuts on the blade holder to make sure its clean. Push em out super easy with the hex key wrench through the hole from the other side.&nbsp;Assembly PartsFor Body:4x - M3x16mm screws4x - M3 Nuts&nbsp;For Blade:2x - M3x5 Screws2x - M3 Nuts&nbsp;Magnets [Optional]:3x - 6mm x 3mm

Retractable Karambit Knife

tools

sweb3791

A Bust of Spiderman - you can print it hollowi closed the base on all sides !&nbsp;Printer : Artillery Sidewinder X2       There is a REMIX : <a target="_blank" href="https://makerworld.com/en/models/239879" rel="nofollow noopener">https://makerworld.com/en/models/239879</a>layer height : 0,1 line width : 0,6no support ; no infill ; print time ~ 22 hSunlu Silk Blue PLAThe Rock : <a target="_blank" href="https://makerworld.com/en/models/463775#profileId-372394" rel="nofollow noopener">https://makerworld.com/en/models/463775#profileId-372394</a>Thanos : <a target="_blank" href="https://makerworld.com/en/models/449172#profileId-355958" rel="nofollow noopener">https://makerworld.com/en/models/449172#profileId-355958</a>My Models : <a target="_blank" href="https://www.printables.com/de/@CB_384764/models" rel="nofollow noopener">https://www.printables.com/de/@CB_384764/models</a>MakerWorld : <a target="_blank" href="https://makerworld.com/en/@sweb3791" rel="nofollow noopener">https://makerworld.com/en/@sweb3791</a>

Spiderman Bust Büste

busts

220°c

Love Pokémon cards? Well you can make your own now.&nbsp;This Charizard card was made using HueForge. It requires 6 colors Black, Blue, Red, Orange, Yellow , and White. I used all Matte colors for this print because the colors seem to blend well together. Matte also helps reduce stringing on the print, but you can use normal PLA if that is all you have. Please keep in mind depending on the brand and shade of your PLA your results may vary. &nbsp;Print at 100% infill with a layer height of 0.08, the first layer needs to be 0.16, and a wall loop of 1.I did not use a prime tower, it is not needed. This print should take about 3h28m if you use the 3mf settings.&nbsp;Swap Instruction are as followed:&nbsp;Start with BlackAt layer #9 (0.08mm) swap to BlueAt layer #12 (1.04mm) swap to RedAt layer #15 (1.28mm) swap to OrangeAt layer #20 (1.68mm) swap to YellowAt layer #22 (1.84mm) swap to White&nbsp;&nbsp;Happy Printing!&nbsp;&nbsp;&nbsp;

HueForge Charizard Card 170

hueforge

ali_264

Hey Everyone! I really loved the design of the <a target="_blank" href="https://www.youtube.com/watch?v=gcaREZGfyDQ&t=1s&ab_channel=Prusa3DbyJosefPrusa" rel="nofollow noopener">Prusacaster</a> done by Mikolas Zuza of the Prusa team, but the kit they linked was very expensive to ship to the US. I remodeled my own version based off this <a target="_blank" href="https://www.amazon.com/dp/B08TBZZN3K?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">amazon DIY Stratocaster Kit</a>. All the parts are included in the kit and you only need to print the 5 parts. &nbsp;Printer: Bambu Lab P1P w/ .4mm hardened steel nozzle&nbsp;Filament: Bambu PLA-CF and Elegoo PLA+** I only used the PLA-CF because I had it from the 1 year anniversary gift, I've seen people do similar designs out of normal PLA and have no issues &nbsp;Print Settings:Body (very structural and needs to be much stronger)-.2mm layer height-8 Wall Loops-5 Top and Bottom Shell Layers-25% Gyroid infill-Normal(auto) Support-.2 mm Top and Bottom Z distance for support (under Advanced)-Mouse Ear Brim&nbsp;All other parts-.2mm layer height-3 Wall Loops-3 Top and Bottom Shell Layers-10% Gyroid infill-Normal(auto) Support-.2 mm Top and Bottom Z distance for support (under Advanced)-Mouse Ear Brim&nbsp;Some of the parts are close to maxing out the build plate, but just keep rotating the parts. They all fit on a 256x256 mm build plate.&nbsp;Assembly:After sanding the faces the would be glued together with a fine grit sandpaper, I glued the parts together using standard Superglue. I recommend aligning all the parts with the front flush to a flat surface before gluing (learn from my mistakes). For the screws that hold the pick guard and cable connector on, I drilled pilot holes that aligned with the existing holes on the parts and screwed them on. For the vast majority of the assembly I just followed the guide that was provided in the kit.&nbsp;Results:Overall, I am happy with the results I got! It plays as you would expect any non-3D printed guitar to play. It is by no means an amazing guitar, but was a very fun build and really rewarding to play it afterwards! I have included the STL's and STEP files if you are looking to do any modifications to the design.

Printacaster

other people

macmanlex

A HueForge art of the Millennium Falcon. Enjoy

HueForge of the Millennium Falcon

gotta try that

ExtRuben

This model can be printed without support. Four 30mm M3 screws are needed. The axis can be melted to the box with a soldering iron to assemble it permanently.

Rugged Box / Container

containers

mikolaj.mazik

I present to you the result of 3 weeks of work, the Liebherr T284 mining dump truck, which is designed in a way that allows it to be printed entirely in 3D. This is the first prototype, prepared for gluing with plastic glue, subsequent versions will have versions with screw holes and movable front wheels. A remote-controlled version will appear in the future. Not all tolerances may be correct. Assembly instructions will appear within 2 days.Feel free to scale it up or down, if so, you may need to use toothpicks or something like that as an axis.

Liebherr T284 mining Dump Truck- Fully 3D printable (version without CAT excavator)

big projects

ryanjsinatra

Pretty straightforward - A box that holds a gift card hostage with 26 bolts Bolts used are M4 x 20mm something like this https://www.amazon.com/M4-0-7-Socket-Screws-Stainless-Machine/dp/B07KRFQJK1/ref=sr_1_3?crid=2PCNS3F24M4ZN&keywords=m4%2Bx%2B20mm%2Bbolt&qid=1703443973&sprefix=m4%2Bx%2B20mm%2Bbolt%2Caps%2C123&sr=8-3&th=1

Gift Card Jail - Annoying Gift Box with 26 Bolts

gifts

mito.sax19

use with Ams please like even if you don't download, this helps a lot&nbsp;print without support

You tried Trophy

trophys

geeklabs

A bad#ss headphone stand if you like Kratos!

God of War Kratos head, headphone stand

statues

Luca L.

Print Hub Logo I made, similar to a websites logo.Letters are 1mm higher than the rest, for one extra layer of color. &nbsp;Holes are designed for two 6mmx2mm magnets.

PrintHub Magnet

signs

Dr.Mussy

<div><h1>Summary</h1><div>Gents here is a grip I designed for V555, its for his AK with better feel and control, there is also a ribbed version for her pleasure ;)<h3>As usual all building details will be in the make. If you are interested in other firearm parts and designs do join our group on Matrix: <a href="https://app.element.io/#/room/%23WeightForward-TheWaitingRoom:matrix.org" rel="nofollow">https://app.element.io/#/room/#WeightForward-TheWaitingRoom:matrix.org</a></h3>!!!Note: I'm always open for suggestion and help on improving the design and proof of concept.!Don't forget to check out my other Cool designs and Follow my Weekly dose of KooKoo uploads ;)</div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>CR-10</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.2</div> <pre><code> Infill: <div>35%</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Any+PLA%2B" target="_blank" rel="nofollow noopener"> Any PLA+ </a><pre><code> Black Notes: <div>8 Shells/Walls</code></pre>Note: this should fit all AK Variants <h1>How I Designed This</h1><img alt="image"> <img alt="image"> <img alt="image"> <img alt="image"> <img alt="image"> <img alt="image"></div>

AK 47 VX Grip

gun stuff

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;

4s