Jean loup

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-19_9f3e533f94456.jpg"></figure>This LED lamp project offers two types of 3D-printed lamps. Type A features a hollowed-out and angular design, while Type B showcases textured and wavy patterns. To achieve the best lighting and shadow effects while maintaining a balance between translucency and light guidance, we have carefully selected suitable LED light sources and recommend using Bambu PLA Basic Jade White filament for this project.&nbsp;Recommended filaments: Bambu PLA Basic Jade White<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683</a>Hardware Kit: LED Lamp Kit-001<a target="_blank" href="http://store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">http://store.bambulab.com/products/led-lamp-kit-001</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013717/design/2023-09-15_31832bf687dbb.png"></figure>

LED Lamp 001

maison 

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

jardin

pbbence1994

A fairly accurate kit card model of a Bell 206B Jetranger helicopter.With it's beautiful multicolor paintjob looks good as desk decoration, but it can also serve as a fidget toy, because the props can spin pretty satisfiingly well. Cut the part out with pliers or nail sissors. The assembly is easy and self explanatory. Have fun printing it!&nbsp;

Helicopter Kit Card (Bell 206B Jetranger)

jouet

Tag3mand

I needed a battery carrier, that can hold the different battery types, that I have from makita, so I made this remix.The batteries fit in snugly and its very durable and lightweight.And this is the model with two cxt slots. (one in each end)

Makita battery carrier - 18V and 2 cxt slots

travail 

BamBam Design

<h4>AMS Sidepocket Silica Box</h4>The perfect Fit Dry Box for the side pockets of your AMS.No need to remove the spool! Very handy ✔<h4>Links:</h4>Original Box: <a target="_blank" href="https://makerworld.com/models/103480" rel="nofollow noopener">https://makerworld.com/models/103480</a>Sensor Open Design: <a target="_blank" href="https://makerworld.com/models/147463" rel="nofollow noopener">https://makerworld.com/models/147463</a>Sensor Closed Design: <a target="_blank" href="https://makerworld.com/models/153148" rel="nofollow noopener">https://makerworld.com/models/153148</a>&nbsp;Hope you like!Happy Printing😃 and don't forget to leave a like👍🏼 and subscribe ✅