user_31404327

h3li0

<h2>protective case for apple magic mouse 2</h2>created in fusion 360&nbsp;photos show printed in black matte pla and white matte pla&nbsp;model is separated into the two profiles, one for the case, and another for the sleeve that prints in spiral vase mode&nbsp;case<ul><li>0.20mm layer height</li><li>10% gyroid infill</li></ul>sleeve<ul><li>spiral vase mode</li><li>0.28mm layer height</li><li>4 bottom layers</li><li>0.52mm outer walls</li></ul>&nbsp;if you enjoy this 3D model and are able to, please consider supporting my work by <a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener">&gt; buying me a coffee &lt;</a> your contribution goes a long way in fuelling future creations. thank you for being a supporter!&nbsp;note: all photos uploaded are of the actual printed model, taken inside a lightbox or in natural light on top of a desk / table

protective case · apple magic mouse 2

Apple

AstraCD

NEW Head Dust Cover V2 for P and X series&nbsp;With so much positive response on V1 you guys deserve even better improved version. I made V1 just as cover for myself and didn’t really design it with intention that it will become so popular, so I decided to make better improved version that I should off done from beginning. I made two version with logo and without logo, you can download as per your liking. Thank you for downloading, and I hope this model will serve you even better. &nbsp;As I mentioned in my previous model this part cannot be too tight as it pops off front cover on sudden fast head changes or stops. I made over 50 different variants and test it to make sure to get to this point. Thank you for your support!

NEW Head Dust Cover V2 for P and X series

Dust Covers

Art Design. 3D

Hi there,&nbsp;here is the Beach Travel Bottle Cap!&nbsp;If you like the model, I would appreciate it if you could take the time to like, follow, or boost it. That helps me continue to create great models for you. Thank you very much in advance.&nbsp;Are you looking for a portable shower to quickly wash the sand off your hands or feet at the beach? Then this cap is just right for you. It&#39;s quick and easy to print. In my print profile, there are two caps available: one with a 1mm opening and one with a 2mm opening. Each of these comes with the option to include or exclude a hole for attaching a string to fasten it to your key or bag.&nbsp;For more designs check out my<a target="_blank" href="https://makerworld.com/en/@BigKev" rel="nofollow noopener"> !!!COLLECTION!!!</a>&nbsp;If you like my work and want to support me you can buy me a coffee <a target="_blank" href="https://paypal.me/ArtDesign3D" rel="nofollow noopener">HERE</a>If you have any special requirements and need it personalized: just hit me up, I´ll try my best to design it for you.&nbsp;Happy printing!

Beach Travel Shower Bottle Cap

Beach Tools

FunkyArt

A 100% 3D printed Smartphone-holder-arm that offers, at least, three axes. And the option of double braces between the axes. In the standard configuration, the arm easily supports around 500 grams in any position. &nbsp;The versatility of this arm enables secure and flexible positioning of smartphones or even tablets and cameras (coming soon) in any desired orientation. Print with high infill and clean up the prints carefully, the minimal gap dimensions of the 3D printed parts ensure reliable function and solid haptic but could also be hard for some printers. &nbsp;You find more additional features and alternatives in the Download section. I will provide more Instructions soon.&nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FxNsubX2KjE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FxNsubX2KjE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;There are some additional upgrades in the download section, such as additional phone rotating movement and counterscrews, less tight screws and a bigger phoneholder.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/752785/2023-11-18_f7836c4a1c65.png"></figure><figure class="image image_resized" style="width:98.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/752785/2023-11-18_a6107c3f6e376.gif"></figure>What to Print?<ul><li>1x CZFA_Flexframe_BaseA_part11x CZFA_FlexFrame_BaseA_part2</li><li>1x CZFA_FlexFrame_PhoneMount (or the optional bigger one)</li><li>1x CZFA_FlexFrame_Mount-Mount (or the optional one with rotating axis)</li><li>1x CZFA_FlexFrame_Screw_cap-lid</li><li>1x CZFA_FlexFrame_Screw_small_Phoneholder</li><li>3x CZFA_FlexFrame_Frame_25cm</li><li>4x CZFA_FlexFrame_Screw</li></ul>Additional parts for rotating your phone, small phones adapter or counters crews..<ul><li>CZFA_FlexFrame_mount-mount-additional-movement-2-2</li><li>CZFA_FlexFrame_mount-mount-additional-movement-1-2 (you will need also one more small screw)</li><li>CZFA_FlexFrame_PhoneMount-small_phones_adapter</li><li>CZFA_FlexFrame_XL-PhoneMount</li><li>CZFA_FlexFrame_Counterscrew (optional to add more weight)</li></ul>Also less_tight versions of the screws.

Flexible & sturdy phone arm (100% Printed)

Studio

make 3D

Filament sample tiles including a 20 pcs sample holder.These are very handy when selecting the right color for your multicolor prints.&nbsp;Each tiles prints in about 20 minuttes.&nbsp;Tiles are made for:PLAABSASAPETGPCTPUPLA-CFPETG-CF&nbsp;Updated on December 12th:&nbsp;PA12-CF (Only stl file)PA6-CF (Only stl file)(I will make more on request)&nbsp;They measure 40mmx40mmx3mm.The tiles come with a ironed top surface with room for a decent sized label or sharpie to identify the exact brand or color.

Filament Sample Tiles with holder (PLA, ABS, ASA, PETG, PC and many more)

Filament Test

Dish Engineering

Present to you V1 of Airless Ping Pong Ball ! The design was created to match international game regulation - mass of 2.7 grams (0.095 oz) and a diameter of 40 millimetres (1.57 in). Altough the mass is still 10% off, coming in in 3 grams, the bounce is actually really similar!&nbsp;Please do Print it with some stronger PLA, like PLA tough or super PLA+. A strong ABS/ASA is also a good choice, but a more rigid material will work better.Currently working on the model so it works better with a bigger variety of less strong PLA&#39;s.&nbsp;Thanks to your amazing help and feedback, version 2.0 is now up! Slight adjustments, Big results, check it out! - <a target="_blank" href="https://makerworld.com/en/models/376178#profileId-276163" rel="nofollow noopener">https://makerworld.com/en/models/376178#profileId-276163</a>&nbsp;Looking for a combo for you airless ball? Check out my recent professional spec&#39;ed airless ping pong racket! - https://makerworld.com/en/models/415669#profileId-317833&nbsp;

Airless Ping Pong Ball

Ping Pong

Topik at Printhood.cz

Easily create checklists using Parametric Model Maker. Click the “Customize” button to add up to 15 items to your checklist. Adjust the size, font, and margins to create your unique checklist.&nbsp;<h3>How to Print:</h3><ul><li>Download the print profile with included checkboxes.</li><li>Click the &#34;Customize&#34; button and adjust the checklist.</li><li>Generate the Base and Cover with text (2 separate STL files) and export them.</li><li>Insert your generated checklist into the downloaded profile (from step 1).</li><li>Optionally, adjust the height for color changes in the slicer.</li></ul>

Checklist generator

Keychains

user_819771961

This is yet another set of infill patterns. I wanted to just try to use all capabilities of the slicer / studio rather than using an app for the design. So the attached m3f is created with Bambu Slicer and design of the case etc. is all done in Studio.&nbsp;This is printed in ABS for the simple reason I liked the colour combination, but I am sure it can be printed in anything you want (maybe not so much TPU - never tried though). &nbsp;I did make some changes in terms of speed etc. - but that is because I printed this with a 0.4mm nozzle and I wanted to get the writing ok ish. So basically what you see here is printed with 0.4mm nozzle and adjusted speeds (95mm/s across all levels and 10mm/s for bridges / overhangs). &nbsp;The Process Settings this is coming with is based on 0.08mm and settings are based on ABS (Bambu brand) so obviously feel free to play with the settings.

Bambu Studio Infill Patters

Patterns

ThreeD-Michael

I know there are a lot of nice bag clips here already, but I wasn't entirely happy with any of them, so I added another design. There are 6 sizes for clamping lengths of 55 mm, 65 mm, 75 mm, 90 mm, 120 mm and 150 mm.&nbsp;My design goals were:<ul><li>stability,</li><li>longevity,</li><li>high holding power,</li><li>easy operation,</li><li>no notoriously weak hinges,</li><li>easy printing,</li><li>and last but not least a pleasant appearance.</li></ul>How to use:As a rule, it is enough to bend the clip on the closure by a maximum of 1 cm in order to slide a bag between them or to remove a bag. It is not intended to bend the clip to larger angles. Bending too hard can cause the clip to break.To open a locked clip, please use one of the two methods shown here:<figure class="media"><div data-oembed-url="https://youtu.be/p4mRMj1A3TU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/p4mRMj1A3TU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Print settings:A flexible material must be used, such as PETG. I haven't even tried printing clips with PLA since I don't think they will work for long (PLA permanently deforms under tension).

Strong Bag Clips

household tools

mcgybeer

The original Articulated Shark is finally on MakerWorld!&nbsp;XY compensations have been tuned because Bambulab printers are way too precise 😂 (and this model was designed back in 2019). Note that the upper teeth rely on the bottom ones to be printed, that&#39;s why a well-calibrated gap is so important. If it fails or it is too hard to open the jaw feel free to adjust the XY compensations yourself. I&#39;ve provided a head so you can test the settings without wasting too much material.&nbsp;4 Versions available:<ul><li>Shark A: Original design, movable jaw</li><li>Shark B: Friendly face, movable jaw</li><li>Shark C: Original design, NON-movable jaw</li><li>Shark D: Friendly face, NON-movable jaw</li></ul>After printing, the tail and the jaw should get free with a little force (a small knife may help you for the teeth): <a target="_blank" href="https://youtu.be/14z1ll9yMmU" rel="nofollow noopener">https://youtu.be/14z1ll9yMmU</a>Then just enjoy it, even in the water!! <a target="_blank" href="https://youtu.be/E1W-RyH8bGA" rel="nofollow noopener">https://youtu.be/E1W-RyH8bGA</a> <a target="_blank" href="https://youtu.be/aV-XhMr7Edc" rel="nofollow noopener">https://youtu.be/aV-XhMr7Edc</a>&nbsp;Check here for <a target="_blank" href="https://www.mcgybeer.xyz/commercial-license" rel="nofollow noopener">Commercial License</a>

Articulated Shark

commerical license products

Dan_ID

PURPOSE = This part will help you release the PTFE tube coming out of the AMS into the buffer.&nbsp;This is technically a remix of <a target="_blank" href="https://makerworld.com/en/models/72083#profileId-76216" rel="nofollow noopener">https://makerworld.com/en/models/72083#profileId-76216</a> which for some reason is not allowing remixes. So we'll just say I was inspired by the design instead.I liked the concept but didn't want to take apart anything. Look at the video they posted to see how it works. &nbsp;UPDATES = in this design include slots to allow the part to flex when inserting it so that you can just remove the PTFE tube, push it in, and put the tube back in.&nbsp;MATERIAL = PLA will probably work but might not flex and just break. So I would recommend PETG or better.

AMS Buffer PTFE Tube Easy Release

Essential Tools

Wcad00

UPDATE 9 - 25.03.2024<ul><li>updated profile REQUESTS - added plate 17 - user @gurthyy  wanted a new module to accomodate a mac mini on its side - added a new two space combo module for mac mini and keyboard/mouse</li><li>updated profile REQUESTS - added plate 18 - user @wmeringolo wanted a new module for miniature painting  - added a new combo module for cup + brushes</li></ul>&nbsp;UPDATE 8 - 16.03.2024<ul><li>updated profile REQUESTS - added plate 13 - user @bambibam  wanted a new combo 1x module for sd/ microsd/usbA/ usbC  - so there is a new combo module available</li><li>updated profile REQUESTS - added plate 14,15,16 - user @gurthyy wanted a way to angle the organizer after specific desktops - introducing Pizza Slices - angled 30degrees modules coming in two snap-on formats for now, but with room for much more customisation. Plate 14 has the universal pizza slice base + simple catch all top; plate 15 has an split/organized top, and plate 16 has a slide-on interchangable name plate - see photos in print profile. Everything was printed and tested for a perfect fit - check photos</li></ul>UPDATE 7 - 05.03.2024<ul><li>updated profile ACCENTS - user @Xanders_Builds noticed an issue i missed with the ‘’steps' accent brims not fitting corectly - too loose - now it is updated and fits fine</li><li>updated profile REQUESTS - added plate 10 -one new module  ASP @user_2207529250  and @bluebeansisradi requested a stand for a ps5 and xbox controller - new module that occupies two spaces and needs to be snapped into place - stand for ps5 and xbox controller - i tested a ps5 controller but i dont have a xbox, but it has some tollerance so it should fit fine - in case it does not, i made the module from two parts , so the stand can be exchanged - please let me know if that is the case</li><li>updated profile REQUESTS - added plate 11 -one new mod  for DRAWER MAX. user @Nerraw asked for a method of separating the drawer into smaller spaces - i made a very simple method of doing that - 4 interconnectible separators that can also be printed individually or by neccesity i guess</li><li>updated profile REQUESTS - added plate 12 -one new module User @zach13 asked for a method of organizing documents vertically so this is my take on it. The iddea was to make it sturdy because it is a little tall and not to waste too much material - it is made from 3 pieces - a base plate and to organizing stands that fit slightly different from each other so that the papers will stay a little cuved to maintain vertical position</li></ul>&nbsp;UPDATE 6 - 15.02.2024<ul><li>updated profile REQUESTS - added plate 7  - Reinforced top plate for the DM. @bosho.liviu requested a top plate so modules could be placed on top - Now you can do that, it is symetric and compatible in every direction</li><li>updated profile REQUESTS - added plate 8,9  - Two new modules . @bdwilson asked for two modules that have removable interior trays - plate 8 has a new 1space tray module and plate 9 has a new tilted marker combo with one large tray on the bottom. The front part of the removable tray is also slanted for easy removal</li></ul>&nbsp;UPDATE 5 - 11.02.2024<ul><li>updated profile REQUESTS - added plate 5  - Tough Plate for the DM. @Heimwerkerbienchen requested a tougher top plate so monitor could pe placed on top of the DrawerMax - has all the toughness required bells and whistles but i really cant guarantee how it will hold up in time - in my oppinion the entire assembly should be printed in a tougher filament, because altough the new plate has a support structure, the drawer modules themselfs are pretty thin so the weight of the monitor will be on the walls</li><li>updated profile REQUESTS - added plate 6  - Half Bow ties. @bdwilson had a very good ideea to close the holes on exterior modules so introducing half bow ties </li></ul>&nbsp;UPDATE 4 - 28.01.2024<ul><li>updated profile REQUESTS - added plate 4  - Steps + Tape dispenser combo unit. altough it was not a request, the plate has the name of the user that gave me the ideea - thank you for that @lilrepete</li><li>the new module is compatible with existing ACCENTS, plus the security wheel and the blade can be printed in other colours to keep things fresh</li><li>the blade slides into the module and is interchangable in case teeth break or you just want another colour. if you feel it fits too tight just trim the seam of it and it will slide more easily</li></ul>UPDATE 3 - 23.01.2024<ul><li>updated the printing order to outer/inner - not a big issue but some had problems - now all is well</li></ul>UPDATE 2 - 22.01.2024<ul><li>added a new print profile called ACCENTS</li></ul>In keepign with the modularity theme and ultra customizability i aim to develop, i made some mix or match brims to add an extra touch of colour to your organizer. everything fits in place without glue or force and same as everything else it is easily changable in case you want to switch up your look and keep it fresh.photos attached in the profile so please check them out. i know the colours i actually printed are not the best but it was all the filament i have till i get my new shipment&nbsp;UPDATE 1 - 19.01.2024<ul><li>added a new print profile called DRAWER MAX</li></ul>it is a drawer module that occupies 4 slots, is stackable and also highly customizablethe first tray for it, as you can see in the pictures is for the spare parts that come with the BambuLab printer + some extras. Fits the parts for two printers.make sure you follow the instructions in its profile to get perfect fits everywhere<ul><li>added a new print profile called REQUESTS</li></ul>this profile contains the user requests for modules. each plate will have the users name on it. this is going to be the profile i will update regularly, based on requests.&nbsp;&nbsp;I’ve been wanting to do this project since I made the first desktop organiser.The problem I wanted to address was, what if in a month you want or need something else, more, or less space, something specific, more room for usb, cards, crayons, etc, how do you keep a new look with minimal to no effort?&nbsp;I’ve seen there have been many attempts to do this but none really took of, so I asked myself why? I think the main reason was lack of interest derived from lack of support. If newer modules aren’t created, interest goes down, and it becomes the same thing as a normal organiser.Of course we have the gridfinity system witch is great honestly and other similar to it, but they all rely on the same premise, a base to keep everything together, so if you are full, you need another base, but does the base you need right away exist? or are you going to be left with extra slots.&nbsp;Maybe I didnt do my research right, and there are other options, all I tried to do was to make something universal, easy to print, elegant, very customisable, and most of all, something that doesn’t depend on screws, magnets and on a base to keep it all tied. I printed 10 bowties In less than 20 minutes on standard, and hold together 7 modules (the ones I use) and you can lift and move them as a whole, without having them fall or break&nbsp;The bow tie joint isn’t my ideea, it’s been used in woodworking for centuries. It is a robust way of holding things together and works quite well here too, especially printed the way I arranged it on the plates . All the modules can be connected in whatever orientation you want, except the laptop stand, because it needs room on the small sides for the length of the laptop/tablet. But that is it - I kind of made that specifically for me, because I use it as an end piece that fits under my P1S (like my first organiser)&nbsp;I am starting with 12 modules and will make a new one every other week, based on suggestions I hope, because I dont think I have enough creativity. I will put out my own ideas because I do have more, but everyone has diferent needs so if you think you can get on board with the ideea I welcome all input, and I will try to make whatever you want. Remix culture is strongly encouraged.&nbsp;Modules in the 3mf:&nbsp;PLATE 1<ul><li>Usbcombo1 (11 usb sticks + 5 full size memory cards + tray for usb caps)</li><li>Phone combo (fits iphone 15 promax + airpods pro)</li><li>Post-its (two full size stacks of postits)</li><li>Steps (4 equal holders - superglue, ties, hex set, mini uv lamp)</li></ul>PLATE 2<ul><li>12 bow tie joints - enough for about anything</li></ul>&nbsp;PLATE 3<ul><li>Hex single - roomie organizer - can be further split with the splitters on plate 8</li></ul>&nbsp;PLATE 4<ul><li>Laptop wedge - macbook pro + ipad pro 12.9 + apple microfiber slot - made to be wedged under the x1 or p1</li><li>Laptop standard - - macbook pro + ipad pro 12.9 + apple microfiber slot + additional slot</li></ul>PLATE 5<ul><li>Tilted marker combo - 12 thick markers + pens and other + paperclip 3 + misc tray</li></ul>PLATE 6<ul><li>apple watch dock double - 2 apple watch charger pucks - like the original - cable management + full size post it tray</li></ul>PLATE 7<ul><li>Hex double - double the size of the single - can be further split with the splitters on plate 8</li></ul>PLATE 8<ul><li>5 split plates for the hex series</li></ul>PLATE 9<ul><li>apple watch dock single - 1 apple watch charger puck - like the original - cable management</li></ul>PLATE 10<ul><li>Usbcombo A - 6 usb sticks + 5 full size memory cards + tray</li></ul>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

The Organizer

storage containers

JP Creations

This is the module 80 for the buildplates from bambulab. It fits the 256x256 buildplates.The module holds up to 9 plates.&nbsp;You dont need any screw&#39;s or bolts to assemble. print it and build it. Everything hookes onto eachother.No supports neededNo brim needed15% infillIts beginner printer friendly. download, print and assemble.&nbsp;&nbsp;<figure class="image"></figure>

JP ModOr buildplate module 80 for bambu plates

AMS System

DGVeLab

&nbsp;A trigger made as an anti-stress tool. All parts, outer shell, spring and trigger are molded together.  Numerous tests were carried out to find the right compression of the internal spring. I think he&#39;s in the right compromise. Fun and relaxing.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000475954/design/2024-05-26_8e7c337e300f9.gif"></figure>&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000475954/design/2024-05-27_f708350df50f4.gif"></figure>&nbsp;&nbsp;NOTEI recommend using my print profile. Some parts print at different speeds.&nbsp;The plunger is blocked originally, with a small internal stop, to avoid moving during printing. The first time you use it, you need to use more force to unlock the plunger. It has been noticed that black colored filaments are more resistant, which is why it is recommended to use colored filaments.&nbsp;&nbsp;TIPS Since the object is narrow and tall it is advisable to follow some precautions such as: a) Use textured plates for better adhesion; b) If you use smooth plates, use a glue stick or heat the plate to 50°C (ventilate the printing chamber well).&nbsp;&nbsp;Accessory Add an accessory to turn it into a key ring. With M6 connection to fit under your Push Trigger.<a target="_blank" href="https://makerworld.com/en/models/479946#profileId-391403" rel="nofollow noopener">https://makerworld.com/en/models/479946#profileId-391403</a>&nbsp;&nbsp;<figure class="image image_resized" style="width: 69.56%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000475954/design/2024-05-31_609f18feaf8ca.png"></figure>&nbsp;

Push Trigger FidGet

Fidget Toys

haydenpatience10

Simple Print In place Credit Card Measuring Device and Pliers That Fits In Your Wallet.&nbsp;