user_3121090071

T3rryX

<p>This is a system of hexagonal shelves i designed from the ground up. The shelves are 250mm wide point to point and i provided various depths, 150mm, 125mm, 100mm and 75mm. Also included drawer/inserts for them, as well as a drawer knob/handle and some clips to attach the pieces together.</p><p>&nbsp;</p><p>The shelves are a single piece print with some gussetts in the corners which also have holes to use screws to hang on a wall, or to use the provided connector pieces.</p><p>&nbsp;</p><p>The connector pieces are made to be press fit, but i also added a hole through the center of the pegs so you can drill it out easily to add screws, this should allow you to either screw from the front to secure the boxes, or screw from the back and create more of a pressure fit by having the screw expand the plastic peg. I included 3 connectors, one for a 3 way intersection, one for a 2 way and a single, just to make for consistent spacing off the wall if you decide to use the connector and fasten to the wall with screws,</p><p>&nbsp;</p><p>The drawers are a 3 piece design, the face and sides are one piece and the back is a separate piece with designed alignment pegs, the pegs are press fit but they are very small so i would suggest using them for alignment and then adding glue for strength. The drawer knob is held on with a M3 screw which is force threaded in to the knob to cut threads, the M3 screw can be anywhere from 8mm to 15mm, obviously the longer screw will get more engagment and be more secure, but dont go longer than 15mm or you risk punching through the face of the knob.</p><p>&nbsp;</p><p>There's also an included “clip” i am not a fan of it, but it would work alright for a temporary setup which do not utilize drawers.</p><p>&nbsp;</p><p>&nbsp;</p><p>As mentioned, there are 4 different depth shelves and drawers, they're all labelled on the plate and on the object, the drawer back and knob is the same for all drawer depths, so you can rearrange things and print whatever's needed for your particular setup.</p><p>&nbsp;</p><p>&nbsp;</p><p>EDIT ADDED: mini shelves, the big ones were too big for some things, so i have added mini shlelves which fits 7 inside the main shelf, i have only done the 150mm version so far because that's what i made for personal use, i added a second profile for the mini shelves/drawers.</p><p>The mini container and mini container stand is just if you want to print the minis without the main shelf, you can still somewhat hold them together and have them stable.</p><p>&nbsp;</p>

Hex Shelf System 250mm - various depths

ヘックス シェルフ システム

Muskoka Research

<div><h1>Summary</h1><div><p><strong>This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLE</strong></p><p><strong>Additional Parts:</strong><br>3x Retaining Clip.stl<br>2x Guide Rod A.stl<br>2x Grip.stl</p><p><strong>Assembly (See Pictures):</strong></p><ol><li>Adhere Frame Base Pad TPU to Frame.</li><li>Install Grip TPU to Frame and Vise via dovetail slots.</li><li>Partially thread in Mounting Bolt.</li><li>Thread Mount Plate TPU onto Mounting Bolt.</li><li>Mount the vise to a benchtop to complete the following steps.</li><li>Feed both guide rods through the Frame and Vise.</li><li>Attach one Retaining Clip to the grooved sections at the base of each guide rod.</li><li>Install Threaded Rod all the way through the Frame and Vise.</li><li>Attach the final Retaining Clip to the end of the Threaded Rod.</li></ol></div><h1>Print Settings</h1><p class="detail-setting printer brand"><strong>Printer Brand: </strong>                         </p><div><p>Creality</p></div>                                    <pre><code>                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></code></pre><p></p>                                    <p class="detail-setting rafts"><strong>Rafts: </strong>                         </p><div><p>No</p></div>                                    <pre><code>                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></code></pre><p></p>                                    <p class="detail-setting resolution"><strong>Resolution: </strong>                         </p><div><p>0.2</p></div>                                    <pre><code>                                            <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>20</p></div></code></pre><p></p><br><strong>Filament:</strong><br><a href="http://www.amazon.com/s?url=search-alias&field-keywords=Duramic+PLA%2B+%2F+TPU" target="_blank" rel="nofollow noopener"><br>Duramic PLA+ / TPU                    </a><pre><code>                Grey/Black</code></pre></div>

Clamp-On Vise - Fully 3D Printable

クランプ

rostap

<h5><strong>News</strong></h5><ul><li><i>March 20, 2022 added bigger hook</i></li><li><i>March 21, 2022 added USB flash drive holder</i></li><li><i>March 21, 2022 added hooks (12mm and 25mm, screwed with M3 screw)</i></li><li><i>March 21, 2022 added box (screwed with M4x10 screw)</i></li><li><i>March 21, 2022 added 2 wall parts (224x190 and 293x271)</i></li><li><i>March 22, 2022 added SD card holder(screwed with M4x10 screw)</i></li><li><i>March 22, 2022 added USB flash drive holder (screw in no need)</i></li><li><i>March 22, 2022 added box (screw in no need)</i></li><li><i>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</i></li><li><i>March 24, 2022 added micro SD card holder (for 5 or 20 pieces)</i></li><li><i>April 4, 2022 added shelves (4 dimensions)</i></li><li><i>April 6, 2022 Added drawers (found as a </i><a href="https://www.printables.com/en/model/163008-honeycomb-box-for-honeycomb-wall" rel="nofollow"><i>remix</i></a><i>)</i></li><li><i>April 12, 2022 Added wrench hooks (2x)</i></li><li><i>May 6, 2023 Added more step files</i></li><li><i>July 18, 2023 Fixed some stl and step wall files. Added image-diagram how to install your honeycomb</i></li></ul><p><strong>Don't forget to look at other </strong><a href="https://www.printables.com/cs/model/152592-honeycomb-storage-wall/remixes" rel="nofollow"><strong>remixes</strong></a><strong> - there are a lot of interesting modifications and accessories</strong></p><p><a href="https://www.reddit.com/r/honeycombwall/" rel="nofollow"><strong>https://www.reddit.com/r/honeycombwall/</strong></a></p><h3>Honeycomb wall</h3><p>The basic part of the wall is printable on the Prusa Mini printer. It is necessary to turn off the skirt or set the distance to 1mm in order for the part to fit it on the pad. </p><p>You can connect the basic parts of the wall together. You can connect it also with printable parts which can be used in various ways (you can use it for screwing to the wall, you can use it as a holder for hanger or as a holder for hook). </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tisgszo2nt8g.png"></figure><p><i>Choose the correct part size for your printer, or use </i><a href="https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b" rel="nofollow"><i>https://www.printables.com/cs/model/530149-customizable-honeycomb-storage-wall-openscad-v21-b</i></a><i> for a custom size.</i></p><h5><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_frme5d4gs7i6.jpg"></h5><h5> </h5><h5>Diagram to show how to install your honeycomb.</h5><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_yrccc5kolg4d.png"></figure><h5> </h5><h5>Printing settings</h5><ul><li>layer height: 0.25 - 0.3</li><li>perimeters: 3 (or more - without infill for faster printing) </li></ul><h3>Parts for attaching honeycombs to the wall</h3><p>Some of the parts (which are orange on the picture) you can use for hanging to the wall or for connecting the basic parts together. </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_be43o1ws3a92.png"></figure><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ajojx36s1wlm.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_2nxibc3el5li.jpg"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fqxf6bjpuxz4.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><h3>Fasteners and parts for attaching hooks and objects</h3><p>There is added one part with the nut (size M3, M4, M5) inside which can be used for screwing whatever holders you want. </p><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_1rsdiotho5yk.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ro3vw4oameqz.png"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_oot6uv6g50m7.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hjjkudqq3rfc.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5rje9cxan9um.jpg"></figure></td><td> </td></tr></tbody></table></figure><p>&nbsp;</p><h3>Hooks and holders</h3><p>This is space for new holders and hooks which will be added as needed. </p><p>Hook bottom and side is prepared to insert to the empty insert part. </p><figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_lcf73emxp801.png"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_rtv2d4cr55ea.png"></figure></td></tr><tr><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_5nhoo4s4wc6p.png"></figure></td><td> </td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_fcnuojpuy9qg.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_ochq2a4i6fyp.jpg"></figure></td></tr><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_nquxdyj69cru.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_e3jw2h6pd0mm.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_avw6edcfzzjq.jpg"></figure></td><td><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hdrj456s7o1j.jpg"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_wsokal0vy58z.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_en42os2oqu0j.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_tqjhj78mu78r.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sctwl7slauf5.jpg"></figure></td><td> </td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_6bz02n1vimho.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qxwzvybnot3t.jpg"></figure><p>&nbsp;</p></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_pa8c7le03qfq.jpg"></figure></td><td> </td></tr></tbody></table></figure><p>&nbsp;</p><h3>Other parts</h3><p>This is cover for the connecting part which is used for hiding the screwer.</p><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_qmmoju4hk27r.jpg"></figure><p>And also you can use the second part (as shown in the picture) which can be used for additional attaching the honey comb to the wall. </p><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_hnjcfsheftbq.png"></figure></td><td><figure class="image image-style-align-left"><img src="https://makerworld.bblmw.com/makerworld/user/3272831870/draft/2023-09-26_sc318q6f89ef.jpg"></figure></td></tr></tbody></table></figure><h5> </h5><h5>My printing settings for all inserts </h5><ul><li>layer height: 0.2</li><li>perimeters: 4</li><li>infil: 20%</li></ul><h4> </h4>

Honeycomb storage wall

ハニカム収納壁

EngGraph

<p>&nbsp;</p><p>&nbsp;</p><p><strong>Elegant Wine Bottle Holder for Your Kitchen Counter</strong></p><p>&nbsp;</p><p>This wine bottle holder is the perfect addition to your kitchen, providing a stylish way to keep your wine bottles easily accessible and organized on the table.</p><p>&nbsp;</p><p><i><strong>Space-Saving</strong></i><strong>:</strong> The compact wine bottle holder takes up minimal space on your kitchen counter while offering a tidy storage solution for your wine bottles.</p><p>&nbsp;</p><p><i><strong>Aesthetic Design</strong></i><strong>:</strong> With its timeless and elegant design, the wine bottle holder seamlessly fits into any kitchen decor, adding a touch of sophistication to your space.</p><p>&nbsp;</p><p><i><strong>Secure Storage</strong></i><strong>:</strong> The horizontal supports ensure that your wine bottles stand securely and stably, without wobbling or tipping over.</p><p>&nbsp;</p><p>This wine bottle holder is not only functional but also an attractive centerpiece. It offers a stylish way to have your favorite wines within reach when you&#39;re ready to enjoy them.</p><p>&nbsp;</p><p><strong>Print your wine bottle holder today and add an elegant touch of organization to your kitchen counter!</strong></p><p>&nbsp;</p><h2><span style="color:rgb(55,65,81);font-size:16px;">Thank you, friends!</span><br><span style="color:rgb(55,65,81);font-size:16px;">It&#39;s impressive to observe your creativity and see how you apply your design and talent. For those who still want to print the model, I&#39;ve summarized the great results you&#39;ve shared in the comments here. I hope that others will be inspired by your designs, color choices, and material selection.</span></h2><p>&nbsp;</p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-07_711ef05a57cf1.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1886292574" rel="nofollow noopener">@katharina.struc</a></figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-07_fabc11917d346.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/3128602605" rel="nofollow noopener">@cbougerie</a></figcaption></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2023-12-19_f0b7a909f08b3.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1723791022" rel="nofollow noopener">@Ccb045</a></figcaption></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/a4b6eb00-9c72-11ee-ae21-a32aac2dff22.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/3007439339" rel="nofollow noopener">@GHOSTELEVEN</a></figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/aac9d440-ad65-11ee-a91c-897eff7dbe9d.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1143904387" rel="nofollow noopener">@Ratler</a></figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/0840f770-a5f5-11ee-9f6e-970eec074b76.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1811672732" rel="nofollow noopener">@tturns27</a></figcaption></figure></td></tr><tr><td colspan="3"><figure class="image image_resized" style="width:96.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/95696cb0-a44f-11ee-b86e-cfdb05226b64.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/4173901069" rel="nofollow noopener">@engintakmork</a></figcaption></figure></td></tr></tbody></table></figure><figure class="table" style="width:91.83%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-09_82ca684fc8585.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/2953964505" rel="nofollow noopener">@adzamper7117</a></figcaption></figure></td><td><figure class="image image_resized" style="width:74.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-09_6600514d25d25.jpg"><figcaption>Print and Design by <a target="_blank" href="https://makerworld.com/de/u/1837491328" rel="nofollow noopener">@EngGraph</a></figcaption></figure></td></tr></tbody></table></figure><figure class="table" style="width:95.77%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-10_2a49647d4fde4.webp"><figcaption><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">Print and Design by </span><a target="_blank" href="https://makerworld.com/de/u/2827972142" rel="nofollow noopener">@Skovgaard</a></figcaption></figure></td><td><figure class="image image_resized" style="width:86.21%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-10_93d6c2a831c3.jpg"><figcaption><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">Print and Design by </span><a target="_blank" href="https://makerworld.com/de/u/4228581023" rel="nofollow noopener">@jacob.simmons52</a></figcaption></figure></td></tr></tbody></table></figure><figure class="image image_resized" style="width:97.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/f2611a50-b0a0-11ee-a59a-ad068eadc082.jpg"><figcaption>Print &amp; Design by <a target="_blank" href="https://makerworld.com/en/u/2873677700" rel="nofollow noopener">@AndyF_CH</a></figcaption></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/812382/2024-01-12_9151a7b941c7f.jpg"><figcaption>Print &amp; Design by <a target="_blank" href="https://makerworld.com/en/u/746945106" rel="nofollow noopener">@surpriselady320</a></figcaption></figure></td><td> </td></tr></tbody></table></figure>

Wine Bottle Holder

ワインボトルホルダー

ICant3DPrint

<div><h1>Summary</h1><div><p>Need other sizes? Here is the parametric version:<br><a href="https://www.printables.com/model/819377" rel="nofollow">https://www.printables.com/model/819377</a></p><p>Print-in-place hinge with multiple versions with different tolerances. (Hinge dimensions in description )</p></div><h1>IMG</h1><p class="detail-image"><img src="https://makerworld.bblmw.com/makerworld/draft/777857/2024-03-28_1i345678s35u.png" alt="image"></p></div>

Print in place hinge

hinge

wuguigui

<h2>Summary</h2><p>I designed a 3D print clip without spring, the separated jaw mouth could be optionally chosen according to different usage.</p><p>This design had another important function is to put pressure on the jaw mouth constantly, so it will not be loose like other 3D print clips.</p><p>I recommend PETG as the filament because it has better toughness, not bad when using PLA+. But I haven't tried ABS yet, someone could help to do it.</p><p>If you like it, please click "like“ it:)</p><p>Thank you!</p><p>A new one was designed based on this clip, with suction cup:<br><a target="_blank" href="https://makerworld.com/en/models/12904" rel="nofollow noopener">https://makerworld.com/en/models/12904</a></p><h2>Print Settings</h2><p><strong>Printer: </strong></p><p>snapmaker 2.0 A250</p><p>                                            </p><p><strong>Rafts: </strong>                     </p><p>No</p><p>&nbsp;</p><p><strong>Supports: </strong></p><p>No</p><p>                                            </p><p><strong>Resolution: </strong>                     </p><p>0.2</p><p>&nbsp;</p><p><strong>Infill: </strong></p><p>60%</p><p>                <strong>Filament:</strong>                 <a target="_blank" href="http://www.amazon.com/s?url=search-alias&field-keywords=snapmaker+PETG+or+PLA%2B" rel="nofollow noopener">                    snapmaker PETG or PLA+                    </a>                any</p>

Clip

squinn

<p>A portable cable organizer which is setup as an <strong>easy print-in-place</strong> and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure><p>This model is an easy print that requires no supports, and <strong>three different sizes are provided </strong>to accommodate cables of different lengths.  If you're not sure which to choose, I'd recommend starting with the “medium” size.</p><p>&nbsp;</p><p>After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), <strong>wind up the cord clockwise</strong> using the handle, and then extend by simply <strong>grabbing the cable by both ends</strong>.</p><p>&nbsp;</p><p><i>Update 2023-09-13:</i></p><p>&nbsp;</p><p>Alternative <strong>smooth-sided versions</strong> of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance.  Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure><p>&nbsp;</p>

Portable Cable Organizer / Winder

Cable Organizer

kurip

3D Print Masters Hub

<p><strong>“Your Wife Will Love You” Bag Clip</strong></p><ul><li>Designed with unique spring tension vein for good clamping force.</li><li>Robust geometry.</li><li>Family members enjoy using this item.</li><li>Please use BRIM if you are having adhesion issue with printer bed.</li><li>Recommend using Bambu Lab PLA, which is pliable for this application.</li><li><span style="background-color:rgb(230,230,77);">Please like and subscribe! More to come!</span></li></ul><p>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

“Your Wife Will Love You” Bag Clip

pinn

Cloud Sea

<h2>在用AMS多色打印的时候很多时候废料容易挂在出料口的活动挡板上，导致废料不能排出</h2><p><img src="https://makerworld.bblmw.com/makerworld/draft/431205/2024-01-21_5283b4d741d64.jpg"></p><h2>这个工具可以将活动挡板容易挂线的位置完全挡住以解决这个问题</h2><p><img src="https://makerworld.bblmw.com/makerworld/draft/431205/2024-01-21_77ca024ec9ad5.jpg"></p><p>&nbsp;</p><p>打印的时候需要开启支撑</p>

P1S打印机废料槽卡料优化工具

カバー

EngineerPro

<p>Slightly over-engineered build plate holder with space for 4 staggered plates. Requires feet extension of the printer: <a target="_blank" href="https://makerworld.com/en/models/192730" rel="nofollow noopener">https://makerworld.com/en/models/192730</a></p><p>&nbsp;</p><p><strong>21 Feb 2024:</strong> Due to request, I added a experimental slim version that is 18 mm tall and with different internal diameter (30.2 mm) of the “loops” to fit Bambu Labs Anti-Vibration Feet. It is reported to work well, just be carefull when assembling the three parts to not break any tabs.</p><p>&nbsp;</p>

ヘックスシェルフシステム

クランプ

ハニカム収納壁

ワインボトルホルダー

hinge

Clip

Cable Organizer

kurip

pinn

カバー

プレートホルダー

ヘックス シェルフ システム

クランプ

ハニカム収納壁

ワインボトルホルダー

hinge

Clip

Cable Organizer

kurip

pinn

カバー

プレートホルダー

ヘックスシェルフシステム