user_3053855743

Websters Creations

Simple 3 color sign for mom

Mom sunflower sign

holiday

letitbe.7

Remix of Articulated Toothless from How To Train Your Dragon created orginally by <a target="_blank" href="https://www.thingiverse.com/Turaak" rel="nofollow noopener">Turaak</a> from thingiverse(thing:6011165).Ready to print with AMS with two colors (black and green).Enjoy!

Articulated Toothless from How To Train Your Dragon

Dragons

Gaudibursch74

Easy printable and strong cable clip with 20 mm inner diameter, easy scalable to other dimensions via slicer software.&nbsp;Inspired by <a target="_blank" href="https://www.printables.com/model/122388-best-cable-clips" rel="nofollow noopener">https://www.printables.com/model/122388-best-cable-clips</a> <a target="_blank" href="https://www.printables.com/de/model/336184-igraring-cable-organizer" rel="nofollow noopener">https://www.printables.com/de/model/336184-igraring-cable-organizer</a>&nbsp;I&#39;ve created a new model, with more strenght where needed, and reduced print time. For other inner diameters the model can be easily scaled in the slicer software via the x and y parameters, e.g. 75% for an inner diameter of 15 mm and 125% for 25 mm.Best printed in PLA with 0.2 mm layer high.&nbsp;Thanks to the comment of @Chinchilla, I&#39;ve created a new Version V2.0 of the clip with more flexibility.

Cable clip

Cable Organizer 

bruno.galam

/There are plenty similar designed wallets on the web but none fit my requirements 100% so I created my version.===============================================9/2/22 Added VORON Edition top and bottom.=============================================== 4/10/20 Completely reworked new version. Now uses easier sourced M3 bolts. Better ergonomics. Easier assembly. More reliable.<a href="https://youtu.be/NkKbHFDw_EA" rel="nofollow">See it in action</a>===============================================The design is by no means perfect. I am still looking to improve it so your feedback is very much appreciated !!!<h3>Print instructions</h3>!!!==>> BOM 1xM3 8mm 3xM3 5-6mm<<==!!!==============================4/10/20 Completely reworked new version. Now uses easier sourced M3 bolts. Better ergonomics. Easier assembly.<h3>More reliable.</h3>Assembly: Check diagram.<h3>!! After print bend Bills Clip slightly before installing so it presses down the bills !!!</h3><a href="https://youtu.be/NkKbHFDw_EA" rel="nofollow">See it in action</a>

3D Printed "Smart" Wallet (Updated for M3 Bolts)

Wallet

Williams Industries

I know there are a few different versions out there, but I did not like the fit and finish on them. Here we have 5 versions, a plain one, red letters, yellow letters, McNaughty, and a keychain. THESE ARE REPLICAS AND SHOULD NOT BE USED IRL.&nbsp;LETTERS ARE DONE IN BS SO YOU CAN EASILY EDIT THIS TO SAY WHATEVER YOU WANT. &nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>&nbsp;Patreon includes commercial use on all prints.

The McMess Around & McFind Out

fun/stuff to sell

3djacobb

Batman Helmet V2&nbsp;&nbsp;Nice print :)

Batman Helmet V2

cosplay ideas

arcanazen

I separated the main STL file made by original creator (whisperit) <a target="_blank" href="https://www.thingiverse.com/thing:6364915" rel="nofollow noopener">https://www.thingiverse.com/thing:6364915</a>.I also modified the size of the SSD cover to support heatsinks. You should print the backplate standing up and use supports and support blockers.&nbsp;You will need these brass insets M2x3x3.5mm and also soldering iron with small tip (small enough to hold the insets) or a 3d pen (or you can use something else to hold insets while you heat them up to melt the parts) to assemble the stock hinge with the kickstand. You can buy them from here: <a target="_blank" href="https://www.amazon.com/dp/B0B8GN63S2?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.com/dp/B0B8GN63S2?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>

Legion Go Custom backplate with kickstand

Parts

Sam HellMyth

Meet Benny, the adorable little bear with a heart as light as a feather and dreams as high as the sky. Benny always found himself captivated by the wonders of flight, his tiny eyes sparkling with excitement whenever he saw birds soaring through the air. But Benny's dream was something more magical – he yearned to take flight himself, drifting among the clouds on a whimsical adventure.&nbsp;My daughters always used to ask me why Benny was so lonely. Not anymore. Meet Binny.If you dont know who is Binny :) you can find her <a target="_blank" href="https://makerworld.com/en/models/252996" rel="nofollow noopener">here</a><h3>Print Settings</h3>1. Tolerance Test for Connectors:<ul><li>Begin by printing the "Tolerance test for connectors.3mf" to adjust your printer’s tolerance for the connectors. Focus on adjusting the connectors, not the cylinders, which are designed with a 0.2mm spacing. Tailor this setting to your printer for a snug fit.</li></ul>2. Connectors:<ul><li>You’ll need 2 large and 4 small connectors for assembly. Print these immediately after your tolerance adjustments to ensure compatibility, or adjust directly in the "Arms and connectors.3mf" file if needed.</li></ul>3. Base:<ul><li>Opt for a 15-30% infill when printing the base. This increases the weight and stability of the assembled figure, helping Benny stay upright during his whimsical adventures.</li></ul>4. Legs:<ul><li>There are no specific requirements for printing the legs; standard settings will suffice.</li></ul>5. Body:<ul><li>Look for a small dot at the placement area for the left arm (and a corresponding dot on the arm). This feature is designed to help you distinguish which arm is left.</li></ul>6. Head:<ul><li>If your printer supports multicolor printing, use the "head multicolor.3mf" file , but better alternative (less waste of filament) is to paint the face details manually to bring Benny's expressive face to life.</li></ul>7. Arms:<ul><li>The left arm is marked with a dot to ensure correct orientation during assembly.</li></ul>8. Balloon:<ul><li>The balloon is the most challenging part to print. Aim for slow speed, 1 or 2 perimeters and 0% infil (to make balloon as light as you can), and at least a 5mm brim, try to print without support for a smoother finish. But if necessary, use user defined organic supports provided in the .3mf file.</li></ul>&nbsp;<h3>Assembly Guide for 3D-Printed Benny:</h3>Step 1: Prepare Connectors<ul><li>Begin by attaching the connectors to Benny's body. Use the larger connectors for the head and legs, and the smaller ones for the arms.</li></ul>Step 2: Attach Head and Legs<ul><li>Once all connectors are in place, proceed to attach Benny's head and legs to the body.</li></ul>Step 3: Assemble Arms<ul><li>Identify the left arm by the marked dot. Attach the left arm to its corresponding spot on the body</li></ul>Step 4: Base Connection<ul><li>Attach the connectors to the base, preparing it to support the figure. Then, place Benny onto the base, securing him in place.</li></ul>Step 5: Attach the Balloon<ul><li>Cut a length of filament, approximately 35mm, to use as the "rope" for attaching the balloon to Benny's shirt. This step brings the entire piece together, completing the whimsical look of Benny ready for flight.</li><li> </li><li>Be Gentle: When attaching parts, especially the balloon, be gentle to prevent any breakage.</li><li>Customize: Feel free to add personal touches, such as painting the figure or adding additional decorations to make your Benny unique.</li></ul>&nbsp;Have fun and enjoy!If you like cute bears check my other model of cute sleeping bearhttps://makerworld.com/en/models/212478&nbsp;

Cute figure of bear flying on balloon

Home good

Geeks3D

Discover our innovative Seat Belt Silencer!an ingenious 3D-printed accessory designed to improve your driving comfort, especially when carrying heavy items on your seats. Crafted with precision, this innovative solution minimizes the noise of seat belts, providing a quieter and more enjoyable ride. Say goodbye to distractions and hello to a smoother journey with our easy-to-install Seat Belt Silencer<ul><li>Fast to print</li><li>User-friendly</li><li>Strong</li><li>Specifically designed for FDM Printing</li><li>Smooth Operation</li></ul>&nbsp;USE AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANY DAMAGE CAUSED!If it doesn&#39;t function properly in your car, please inform me, and I&#39;ll explore redesigning it to better suit your needs!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/Geeks3D" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;Remember to hit the like button and follow if you like my designs!&nbsp;You may also like: Stackable Crate For Batteries Mario 360° Makeup Brush Holder &amp; Organizer<figure class="table" style="width:857.375px;"><table class="ck-table-resized" style="border:1px double rgb(179, 179, 179);"><colgroup><col><col></colgroup><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> <figure class="image"><a href="https://makerworld.com/en/models/67355#profileId-71293" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/838922/2023-11-18_be779a260a76a.jpg"></a></figure></td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;"> <figure class="image image_resized" style="width:84.6%;"><a href="https://makerworld.com/en/models/375299#profileId-275196" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/838922/2024-03-16_ddadd90d09674.png"></a></figure></td></tr></tbody></table></figure>

Seat Belt Silencer

tools

redghost13

抽屉内部尺寸为104X72&nbsp;2024.4.10将抽屉的导轨边改成了斜边，更利于打印，抽拉也更顺滑增加了一个加深了40MM的抽屉，可以放一些高一点的东西

洞洞板 抽屉（兼容宜家IKEA Skadis）

Storage

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Articulated Crystal Dragon by Saber3D

Toys

Lars 🙂

Plant Swing!A funny cute plant pot sitting on a swing. Give your pot different hair styles by choosing your plant. I’ve included a attachment so the swing can be attached under a shelf, window frame or on the ceiling. If there is interest for a attachment the can be hung from the wall I will make one!&nbsp;Please leave a like, feedback and don’t forget to upload your makes! If you’ve got any trouble don’t hesitate to contact me.&nbsp;Materials needed<ul><li>1 piece of rope. ~3mm diameter.</li><li>PLA</li><li>Plant</li><li>Glue</li><li>(2 screws) if you want to hang it up underneath a shelf or window frame. </li></ul>&nbsp;Assembly:<ul><li>Glue the arms and legs in place. (arms should be vertical up, for the rope.)</li><li>Glue the shoes on the legs.</li><li>Cut 1 piece of rope at the desired length. (2x the length between the attachment and actual height you want the swing to be hanging.</li><li>Insert the rope through the holes in the swing from the top side down. </li><li>Tie a knot on both ends of the rope to keep the seat in place.</li><li>Press the rope in the hands of the pot. </li><li>Attach the attachment to the desired place and screw it down.</li></ul>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/817277/2024-04-05_ab058c6f1ef1e.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/817277/2024-04-05_c05c4ebe9d9a7.jpeg"><img src="https://makerworld.bblmw.com/makerworld/draft/817277/2024-04-05_6eb7980bdcde8.jpeg">

Plantpot on a swing!

Planters

SavageLau

<h2>If you want a commercial license, check out my bio and get it from Patreon.</h2><h2>Personal use only.</h2>&nbsp;This model is design for MakerWorld light contest (2/5). Complete free version is only available on here Makerworld. <h3>Many people have contacted me said they willing to pay for the model. Other platform product manager reach and out said I could use their platform and selling this design for some money, but I have decided to keep it here for free for now. So there will be more people could enjoying it :) So show me your finshed print, I would like to see it. </h3><h3> Anywhere else you see this model upload is Unauthorized (please notify me and report them), beside my own account (SavageLau). </h3>&nbsp;<h2>If you would like purchase LED light needed for this design and filament from Bambu Lab Offical website: Affiliate link is below, so I can get some commission to support my future work. </h2><h2><a target="_blank" href="https://shrsl.com/4h4np" rel="nofollow noopener">https://shrsl.com/4h4np</a> </h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-03-23_4ad27b7082fe3.png"></figure><h2>Filaments that I use for this project: (Bambu Lab Offical website:)</h2><h2><a target="_blank" href="https://shrsl.com/4h4ns" rel="nofollow noopener">https://shrsl.com/4h4ns</a> </h2>&nbsp;&nbsp;&nbsp;<h2>You may also like this design:</h2>PeaShooter Lamp Kit 001. <a target="_blank" href="https://makerworld.com/en/models/174475#profileId-191833" rel="nofollow noopener">https://makerworld.com/en/models/174475#profileId-191833</a> &nbsp;&nbsp;&nbsp;My boss saw some Bellsprout light the other day and she want me to design one. I have one LED Lamp kit come with my a1mini and sitting for a while. So why not turning it into what she want. So the design started adpot the lamp kit into Bellsprout.I found this pic on Google, based on the posture and proportion started deisng.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_bc131748fd272.png"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_33679f29d502a.png"></figure><h2>Update: </h2><h3>2/2/2024. A new profile was made for a1mini. Increased infill/walls on base and body part. </h3>Model main body have been reduced in size inorder to meet the build plate size for a1mini with muti-color prints. &nbsp;<a target="_blank" href="https://makerworld.com/en/u/2010665163" rel="nofollow noopener">@Sascha2202</a> feedback it is a bit hard to keep banlance. Weight increased on printing profile by adding more infill and walls. Weight for that part from 160g to 202g, lowered center of gravity. Consider head is around 40g + led weight, it should do well now. <h3>2/1/2024. Joints redesigned. </h3>Improved joints firction load, strength, tolerancing. New turning angle sets around 13.5 degrees max for each joints. <figure class="image image_resized" style="width:36.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-01_d00693a8b7acb.png"></figure>“Head” part fit and finish improving. <h3>Revisions and Tests today:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_ffe7e41994dec.png"></figure>&nbsp;<h2>Before you print(Important!):</h2>Run the joint test print first with the filament you are going to use for joints and body, before you doing the full print! This is important. Depend on filaments you use for the joint parts, there will be sinkage rate difference, and firction load on joint will be different.&nbsp;I put very tight tolerancing on design, but it may not work as intended when you printing with your filaments, so run the test and confirm joints is very tight to each other. Other wise You will not get the desired result.&nbsp;&nbsp;Joints with other parts are standard size. There is one “Tight” profile for joints. There are two types of joint, regular and with wire clip one. You will need to print total of 12 or above (maybe less than 15) to get good proportion. &nbsp;Joints designed best work with 4 wall layers, and 10% to 20% infill, adding more infill will not improve the strength, will only leading part failure during assembly. &nbsp;<h2>Hard ware:</h2>This design require Lamp LED Kit 001 from Bambu Lab. All other parts are printable. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_bca061fd80f1d.png"></figure>&nbsp;<h2>Post work:</h2>Removing brims from all parts, when you remove brim from joints part, confirm it is fully removed. <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_dec1b2c670225.gif"></figure><h2>Assembly:</h2>Refer these gif image. Joints is a bit hard to push in, refer how I do it, holding the bottom part with you fingure, it will reduce the change of failure. &nbsp;Joints:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_5c978e23e8634.gif"></figure><figure class="image image_resized" style="width:51.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9f2e463b2d8a6.gif"></figure>Fully assembly:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-02-02_9a975d341b61f.gif"></figure>&nbsp;&nbsp;&nbsp;<h2>Design:</h2>Lamp kit is 60mm dia, 8mm thickness. based on that dims and make rough draft to evaluate the overall size.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_34bf66e6b20e5.png"></figure>&nbsp;Working on some parts, and integrate them in the end.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_4880a9ab2336a.png"></figure>&nbsp;I started with wanting ball joint on the head, so it will able to turn angles. End up why not to have more ball joints on the body.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_b08f0ea2e5ee9.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ec7f991cbaa.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_80ed16d7dd498.png"></figure>&nbsp;Ball joints is pain in the axx to work with. I want it to have a lot of friction load in normal condition. so the outter shell shall have very small tolerance to the ball or even smaller. Ended spending a lot of time try in truth to testing out different tolerances and make design revisions.Still not perfect, but it work for this application. You gain a lot of DOF, but it is a bit brittle, depends on your materials.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-30_153933e0ba5bb.png"></figure><h2>Revisions and tests:</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/796346/2024-01-31_641c974fd0d58.png"></figure>

BellSprout Lamp LED Kit 001

Lightboxes

fay3dlab

i tried making a new type of suspended model for my Star wars collection.. This is a book nook diorama of the famous trench run.. although i didnt have a tie fighter so i changed it to a tie interceptor.. i might do another one with a tie fighter later.. since its printed in 2 parts.. i could also change up the ships..<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/798245/2024-04-01_0e523998b2e09.gif"></figure>The 2 parts are joined together using pegs insert.. the front part has a channel for the LED strips.. its fairly easy to assemble.. just be careful with the laser coming from the tie interceptor.. it goes in between the strings for the x-wing..<figure class="image image_resized" style="width:35.77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/798245/2024-04-01_8b1527dc2f0cf.jpg"></figure>In order to keep the x-wing wings stick to buildplate.. i made a small brimm for it.. you can remove it before assembling the 2 parts together.The book nook measures at 15cm width 20cm height and 20cm deep..&nbsp;If you&#39;re interested in getting the LED strips.. here&#39;s my affiliate link to buy it.. 5V USB RGB LED Strip Light <a target="_blank" href="https://s.click.aliexpress.com/e/_oEk0hDa" rel="nofollow noopener">https://s.click.aliexpress.com/e/_oEk0hDa</a>&nbsp;As always i also prepped the 3mf files for multicolor prints as well.. and remember when printing suspended models.. set the wall generator to arachne from classic.. this will make the slicer print the strings.. and NO SUPPORTS..&nbsp;I hope you guys have fun printing this new version of the suspended book nook<figure class="table" style="height:162.344px;width:960px;"><table style="background-color:rgb(255, 255, 255);border:1px double rgb(179, 179, 179);"><tbody><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">If you would like to support me, you can join me on my <a target="_blank" href="https://www.buymeacoffee.com/fay3dlab" rel="nofollow noopener">buymeacoffee</a> page..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">By joining me as a supporter.. you&#39;ll be able to get behind the scenes informationon my current projects as well as future projects..</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;">And if you&#39;re looking to sell my prints.. you can join my merchant membership tier as lowas USD10 a month..</td></tr></tbody></table></figure>