user_3014097827

3DVJModels

<h2>Description</h2>Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions!&nbsp;**Stand Update v3.1**- Split stands into two parts to reduce print time. (Fit Tested and are Functional!)&nbsp;**Scaled Models Update v3**- As mentioned by @Hobo4ssassin in comments, depending on the scale of this model, you can achieve different tones!- Pre-scaled models have been added and are labeled accordingly.- Sizes are as follows:100% (Original Files, Loud/High Pitch) - Easy to blow and great size for kids, keep in mind, this one is loud! You have been warned.EDIT - 6/18/23:Decibel Meter Results in a room about a meter away blowing hard: 122.9 dB (thanks! @Felipe). This is about as loud as a siren on an ambulance or police car!127% (Traditional Sound) - Not hard but not easy to blow.200% (Deep Low Tone) - Print if you have massive lungs! Note that this size does take a lot of air which may be difficult to play!- Magnet version still takes 6 x 3mm magnets regardless of size chosen!- Added pre-scaled whistle stands.- Once again, no supports required for new models.&nbsp;**MagnetBlowPieceEdition Update v2**- Added new option for attaching the blow piece using 6 x 3mm magnets.- Depending on your printers accuracy, it is possible you may need to glue the magnets in place. When doing this, be sure to line the magnets up correctly so they will not repel each other! That being said, assembly is very straight forward.- New models remain support free! They also follow the same printing guidelines!- Sorted files into folders for your convenience.&nbsp;Video Below is a sound test of the 100% Scale Model!&nbsp;&nbsp;*Prepare yourself for a surprise this whistle is very loud!I have always enjoyed those wooden train whistle toys found at hobbyist shops, so I built my own trying to stick to the general design of it! I also optimized the whistle for 3D printing so you do not need supports and even have the option to print a reduced material version if your low on filament. I have made the reeds print-in-place so you will not have to worry about assembly of these parts!The blow_piece_cover is simply pressed in place, although you may have to give the small squares a light pinch with pliers if you find your cover too loose or a small amount of glue will be perfect!<h3> </h3><h3>Print Instructions</h3>It may be possible that you print your whistle out and it does not work. Don&#39;t worry! Be sure to stick to the print settings here and you will be whistling away in no time!Printed on a Bambu Lab P1P with stock settings - Nozzle: 0.4mm - Layer height: 0.16mm - First Layer height: 0.2mm - Perimeters: 2 minimum (3 is ideal) - Infill: 20% grid pattern - Extruder temp: 220C - Bed temp: 65CAlso don&#39;t forget, no supports are needed!Pre-sliced Bambu Lab P1P file available.&nbsp;Feel free to share your prints with me and others. Happy printing!

ChooChoo - A Support Free 4 Tone Train Whistle

乐器

tjhoven74

608 Bearing make sure first layer is well calibrated, and you are printing with fine settings.Supports on.

608 Bearing

零件

Ghost Cowboy

Batwoman Sexy

手办

Bamingo Design

<ul><li>❄ 🌨️ Is your table missing that special seasonal sparkle? Unique snowflakes for your table, each coaster an intricate art of frost.</li></ul>Snowflake Coasters: Unique Seasonal Sparkle<ul><li>🎨 Frosty Design: Each Snowflake Coaster is a unique representation of frost&#39;s delicate art, capturing the unique beauty of snowflakes. Their intricate patterns are designed to bring a touch of winter&#39;s magic to your table.</li><li>👶 Easy to Print: No need for (AMS) or (MMU). Only two manual filament swaps are needed to complete the model.</li></ul>Technical Specifications:<ul><li>📏 Size:<ul><li>10 cm</li></ul></li><li>🔧 Print Settings:<ul><li>Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm</li></ul></li><li>🌈 Color Changes:<ul><li>Start with Blue</li><li>At layer #19 (1.6mm), swap to Light Blue</li><li>At layer #25 (2.08mm), swap to White for the rest.</li></ul></li><li>📋 Assembly and Usage Tips:<ul><li>Alternatively, use our ready-to-print 3MF file—it automates these steps.</li><li>The files are available in STL, Prusa 3MF, and Bambu Lab 3MF file formats.</li></ul></li></ul>Explore More Designs:<ul><li>Dive deeper into our collection of nature-inspired coasters for more designs that capture the beauty of the natural world:<ul><li>🌊 <a target="_blank" href="https://makerworld.com/en/models/25169#profileId-21943" rel="nofollow noopener">Wave Coasters</a></li><li>🗼 <a target="_blank" href="https://makerworld.com/en/models/251129#profileId-267476" rel="nofollow noopener">City Coasters</a></li><li>⛰️ <a target="_blank" href="https://makerworld.com/en/models/30652#profileId-27193" rel="nofollow noopener">Mountain Coasters</a></li></ul></li></ul>Licensing Information:<ul><li>These designs are for personal use only. To access them for commercial purposes and enjoy exclusive benefits, consider joining our Memberships. <a target="_blank" href="https://www.printables.com/@BamingoDesign#join:397" rel="nofollow noopener">Printables Memberships</a></li></ul>Stay Connected:<ul><li>Be the first to know about our newest designs by following us on Twitter and Instagram. Find all our social media links and more at <a target="_blank" href="http://bamingodesign.com/" rel="nofollow noopener">bamingodesign.com</a>.</li><li>We&#39;re excited to see your creations! Tag us when sharing photos of your prints and connect with us. Your feedback and requests are always welcome. 💙</li></ul>

Snowflake Coasters - Hueforge

摆件

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

Ultimate Bag Clip (with Lid - easy access!)

厨房

Johny3D

<h2> ** ADDED NEW MODEL WITHOUT BAMBU LAB LOGO (ONLY X1 CARBON) **</h2><h2>Bambu Lab Bed Scraper X1 Carbon</h2>Enhance your 3D printing setup with the Bambu Lab Bed Scraper X1 Carbon – a tool designed for precision and ease of use. This bed scraper combines a functional design with practical features to make your printing projects more manageable.With a focus on durability, the Bed Scraper X1 Carbon is designed for everyday use.&nbsp;Simply download and 3D print this tool to improve your control when removing prints from your 3D printer bed.The ergonomic design ensures a comfortable grip, making the Bed Scraper X1 Carbon a practical addition to your 3D printing toolkit.&nbsp;Upgrade your setup with Bambu Lab's commitment to practical precision and simplify your 3D printing experience.&nbsp;If you like the Voronoi pattern, you can check my other bed scrapers:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/80151#profileId-85120" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/271230/2023-12-03_35e9655b5d1d4.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/80139#profileId-85123" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/271230/2023-12-04_758d9e81d03b.png"></a><h3>Recommended settings:</h3><ul><li>4 walls</li><li>0.2 mm layer height</li><li>15 % infill</li></ul>Thanks for your ratings and comments! Really appreciate it.

[NEW] Bambu Lab Bed Scraper X1 Carbon

打印机配件

squinn

This print-in-place locking bag clip has been designed so that it can be printed without supports, has a fun curvy shape, uses an outward angled handle for easier one-handed use, and is a nice size at just under 6 cm when closed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-21_kei37ynb43g3.gif"></figure>I'd recommend you set the “Strength→ Wall Loops" option to at least 5 for increased strength. In addition to the STL, I'm also attaching the Fusion360 file if you'd like to make adjustments.&nbsp;The original “Cam Lock Bag Clip.stl” (which I'd still recommend you start with if you're printing in PLA) is designed with a .2 mm tolerance around the pivot joints. If you have trouble with the plastic fusing in your print conditions though or are printing in other materials - such as PETG, I've now also attached two versions that increase the spacing tolerance slightly (.3 mm and .4 mm) which you could use as an alternative.&nbsp;This is a complete from-scratch design, but there are many great cam locking clips. Although notably different, I've marked this model as a remix of the very cool model that ‘jfedor’ did which used a similar approach for making a clip printable without requiring supports (which itself was a remix of Andrei's popular version that does require supports).

Curvy Cam Lock Bag Clip

工具

Kocyns

<h3>Basic info:</h3><ul><li>Toroidal propeller launcher with double planetary gearbox.</li><li>Update: Part 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li></ul><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-12-17_c4bb05a73c6fe.gif"></figure><figure class="image image_resized" style="width: 39.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_83uzwi9s2ww6.gif"></figure>&nbsp;Gearbox:<ul><li>Non-printable parts: You just need one type of screws (M3x16 Countersunk screw, DIN 7991) for assembly.</li><li>Gear ratio 1:12 with smooth move.</li></ul><figure class="image image_resized" style="width: 28.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_zynkq0o8slne.gif"></figure><h3>Printing:</h3><ul><li>No supports!</li><li>Layers height are 0,12-0,2mm.</li><li>Recommended material for gears is PETG, see below to BOM.</li></ul><h3>BOM:</h3><figure class="table"><table><thead><tr><th colspan="4">Printed parts/Purchased parts</th></tr><tr><th style="border: 1px solid #000000">Item</th><th style="border: 1px solid #000000">File</th><th style="border: 1px solid #000000">Qty</th><th style="border: 1px solid #000000">Description</th></tr></thead><tbody><tr><td style="text-align: center">1</td><td>1.stl</td><td>8</td><td>PETG</td></tr><tr><td style="text-align: center">2</td><td>2.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">3</td><td>3-Ring-up.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">4</td><td>4-Ring-down.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">5</td><td>5.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">6</td><td>6.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">7</td><td>7.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">8</td><td>8.stl</td><td>1</td><td>PLA (1)</td></tr><tr><td style="text-align: center">9</td><td>9.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">10</td><td>10.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">11</td><td>11.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">12</td><td>12.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">13</td><td>13, 13Low ,13-256</td><td>1</td><td>PETG (2)</td></tr><tr><td style="text-align: center">14</td><td>14.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">15</td><td>Tor_170.stl, Tor_200.stl</td><td>1</td><td>Propeller (3)</td></tr><tr><td style="text-align: center">-</td><td>Tor_base.step</td><td>-</td><td>to create remixes</td></tr><tr><td style="text-align: center">16</td><td>Screw M3x16</td><td>11</td><td>Countersunk screw (DIN 7991)</td></tr></tbody></table></figure><ol><li>Recommended high of layers 0,12mm</li><li>13Low.stl is for printer bed size under 250x210mm. 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li><li>170mm or 200mm toroidal propeller +105mm. Recommended high of layers 0,12mm.</li></ol><h3>Assembly:</h3>STEP 1:<figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_wkmqsgwz6zyl.png"></figure><figure class="image image_resized" style="width: 40.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_lbjrwlyynvsa.png"><figcaption>Note: Screw (red) in detail A shouldn&#39;t be too tight!</figcaption></figure>STEP 2:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_ozf5yzznmp1z.png"></figure>STEP 3:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_oog17ne6f0uq.png"></figure>STEP 4:<figure class="image image_resized" style="width: 39.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_sstcnap2p6qk.png"></figure>STEP 5: Let&#39;s fly!!<figure class="image image_resized" style="width: 40.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_4qb6fj7yq7z3.png"></figure><h3>Commercial uses:</h3>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;&nbsp;Note: By downloading and using the model, you agree that it is provided &#34;as is,&#34; without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.

乐器

零件

手办

摆件

厨房

打印机配件

工具

玩具