Pegasus

DavidMV

UPDATE: better printability threads.&nbsp;This is a modular airgun silencer for .22 or .25&nbsp;It is the same comncept of Huma Air moderators. You can experiment with adding more of less sections. In section or chamber you can decide to one or more different types of baffels. It all depends on your airgun what works best.&nbsp;I tested the silencer with both the Snowpeak PP750 and RTI Airms Priest 2, two very different PCP airguns. 3 sections with each two simple baffels each worked best for the PP750. 4 empty sections worked best for the Priest.&nbsp;I uploaded StartBus with ½ UNF 20 thread and an unthreaded one for you to tap in the threadsize you need.&nbsp;One tip: be very careful when you first thread the StartBus onto the barrel as straight as possible. Yo can easily damage the threads. Also, do not remove/replace the startbus unnecessarily to prevent too much wear and tare. (It is made of plastic you know)

Modular airgun moderator / silencer .22 to .25

gadget

BODY3D

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>

Ghost Booh

Decor

Generic User

This tool is designed to facilitate removal of the PTFE Bowden Tubes on the rear of the X1/P1 Machines. It also has the Plug Clip Tool included to remove the Buffer cable plugs. Printed in PLA it is a robust tool, added 6x2mm or 10x3mm magnet and you can throw it on the back or side panels where it is handy to retrieve and not get lost. The best method to insert the magnet is to place the magnet on a flat surface and then press the tool on top of it to fully insert. The 10x3 is my favourite as it sticks to the side and doesn&#39;t move till I need it, if there is a problem with the magnet staying behind when you pull it off, a dab of superglue or similar works wonders.&nbsp;<h4>Instructions for use</h4>&nbsp;&nbsp;<figure class="image image_resized" style="width:50.09%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173932/design/2024-02-28_0d4df5f06c9ee.jpeg"><figcaption>Release button is located inside the spring area, simply insert and move towards the LEFT.</figcaption></figure><figure class="image image_resized" style="width:50.12%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173932/design/2024-02-28_8466358393d678.jpeg"><figcaption>Pull the PTFE once you&#39;ve depressed the release button. It will need constant pressure.</figcaption></figure>&nbsp;    <figure class="image image_resized" style="width:49.98%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173932/design/2024-02-28_e7cf59cc283338.jpeg"><figcaption>Place over the Plug</figcaption></figure><figure class="image image_resized" style="width:50.11%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173932/design/2024-02-28_55b016c2d8ec9.jpeg"><figcaption>Manoeuvre Tool forward till it engages the Plug fully depressing the clip</figcaption></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173932/design/2024-02-28_7e685699b3ac5.jpeg"><figcaption>Same applies for the bottom Plug. Some wriggling may be needed to remove plug</figcaption></figure>&nbsp;&nbsp;    <figure class="image image_resized" style="width:49.93%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173932/design/2024-02-28_00738e9a31165.jpeg"><figcaption>Insert and press to release PTFE. Pull tube as you are pressing the tool in.</figcaption></figure>&nbsp;                                                                ** While you have your magnets handy, print one of these :)<a target="_blank" href="https://makerworld.com/en/models/225005#profileId-242905" rel="nofollow noopener">https://makerworld.com/en/models/225005#profileId-242905</a> <figure class="image image_resized" style="width:50.07%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000173932/design/2024-04-08_1e0ea5cbd8661.jpeg"></figure> &nbsp;                                                                  &nbsp;&nbsp;

gadget

Decor

tools