user_2981979824

Supergrapher

Updated : 9th of June 2024Made 5mm taller to accommodate the “Ultimate Filament Spool Enclosure for AMS Lite”Link → https://makerworld.com/en/models/486153#profileId-398821&nbsp;NO ADDITIONAL SCREWS NEEDED! SNAP-ON DESIGN!&nbsp;I have 2 A1s and I used Bambulab&#39;s top mount for my first printer, but when I wanted to print a second one the second printer, Whoa! there were so much inefficiencies in the design that I had to make my own improvements! So here I present to you my own Super AMS Lite Top Mount! The advantages are…<ol><li>No additional screws needed! You just need the ones you take off from your AMS Lite</li><li>Snap-on design</li><li>Prints without support</li><li>Uses less filaments (about 40% less!)</li></ol>Instructions<ol><li>Slide in the mount over the top railing, it is tight, but it should just barely pass through</li><li>Attach the clip to the upper section first and press it press it firmly with a &#34;click&#34; to fasten it to the lower section</li><li>Attach the AMS Lite using the same screws</li></ol>*Note this is a non-rotating mountI designed this from scratch but since I used the measurements of the Bambulab mount I&#39;m marking it as a remix.&nbsp;Have Fun!Check out my other A1 related upgrades, <a target="_blank" href="https://makerworld.com/en/@Supergrapher" rel="nofollow noopener">https://makerworld.com/en/@Supergrapher</a>

SUPER AMS Lite Snap-On Top Mount

Upgrades A1

BigMikeMW

IMPORTANT: TO DOWNLOAD THE MODEL CHECK THE RAW STL FILES FOR THE REST - .3MF IS ONLY FOR THE CAPE NOW.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450791/design/2024-05-02_308d37373ca55.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450791/design/2024-05-02_7a60abc0574328.png">&nbsp;A highly edited and polished model of an elite soldier called the Helldiver from the hit 2024 videogame Helldivers 2&nbsp;If you like the model, please consider printing it and liking it on this page and sharing it with your friends or fellow citizens - otherwise, you might be considered as a bug sympathizer and should expect a knock on your door from the Ministry of Truth.&nbsp;Instructions:You may print the parts in any particular order, but I&#39;d recommend printing the big main parts first + the main body connector, and then print one of the small connectors only and checking if it fits, if it&#39;s too tight, scale it down and use it that scale for other small pins aswell.&nbsp;I recommend printing the right hand with the gun and the helmet with a smaller nozzle and layer height for more detail.&nbsp;The model includes two hellpod stand sizes, but the model should also be capable of standing on its own. You can also use the connectors as a reference to make your own stands.&nbsp;Happy printing, glory to Superearth!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000450791/design/2024-05-02_17bf5ac0deddf8.png"></figure>

Upgrades A1

Fila de projetos