user_2971178907

_donkey-brains_

This is a crow that I modeled in CAD and finished in Blender.&nbsp;The intent of the model was to use as a decor piece that would be able to hold a lamp cord in its beak. My Significant other has wanted to buy something like this for a long time, so I thought it would be a cool opportunity for a print. The lamp cord and bulb was sourced from an online retailer. This is simply a plug in cord that has a light-bulb socket on the end. I ensured getting one with a dimmer switch, as no shade would entail a very bright bulb. Even if not intending to use as a lamp, the model looks great as is or scaled down. &nbsp;I printed this at full size with slim tree supports on the under side of the model. The legs and head/beak, did not and should not require supports. I suspect this may not need supports at all in highly tuned printers (but I didn&#39;t want to risk it for my showpiece). Even then, tree support scarring will not show when model is upright. It looks great in black or other fun colors.

Crow Model (Lamp)

Dinos

CC3D

These coasters are 89x89mm and 3.5mm in thickness.Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 5 PLA BambuLab Matte Ivory White Transmission Distance: 3.6&nbsp;-If you do not have an AMS, just manually swap out the filament spools at the right layer (adding a pause in the slicer where you would change colors)-Do NOT adjust the size in your slicer!! The layers will not come out right.-Do not change the size, this will cause errors in color change compromising the entire print. -Use my print profile or you will not get the desired results. -It can be printed safely without AMS and on any printer.-To get the same outcome as the print I have shown. You need to use the same filaments that I have listed. Each filament has different &#34;density&#34; or transmission distance that allows light to shine through to the filament underneath the top. So if you use a different brand or type, it might not have the same effect as if you did it with the exact same color and filament. Nonetheless give it a shot and leave a picture of your print if you wish to run it anyway. Id love to see the outcome from different brands and types to see how it turns out as well!-Please leave me a thumbs up if you love the print!!

Naruto Inspired Coaster Set of 4

Anime

designs.by.Marcum

The perfect way to bring your favorite wildlife species into your home!&nbsp;Wildlife Conservation is a topic that has been very near and dear to my heart since I was a small child, so it was only a matter of time for me to expand my Kit Card series to include various wildlife species. As the same with all of my others Kit Cards, these designs are simple and easy to print, but instantly recognizable as your favorite animal.<blockquote>In the universe are billions of galaxies, in our galaxy are billions of planets, but there is Only One Earth. It is important to remind ourselves that we only get one chance to protect and conserve the natural beauty of this world, and it is my absolute pleasure to bring awareness and life to some of the species that are most endangered of never being seen again.</blockquote>Current species included:<ul><li>African Forest Elephant</li><li>African Lion (Male and Female)</li><li>Bonobo (P)</li><li>Dromedary Camel</li><li>Giant Panda (P)</li><li>Hippopotamus</li><li>Linnaeus&#39;s Two-Toed Sloth (P)</li><li>Llama (P)</li><li>Meerkat (P)</li><li>Mountain Gorilla</li><li>Polar Bear</li><li>Ring Tailed Lemur (P)</li><li>West African Giraffe</li><li>White Rhinoceros</li></ul>Animals above marked with “(P)” are located exclusively on Patreon, link below.&nbsp;The kit card connectors were designed to easily snap away, but for the cleanest finish it is recommended to use snips to remove them. Each animal may have a slightly different assembly, but the fundamentals remain the same amongst all of them.<ol><li>Snap all connectors to free each piece</li><li>Slide the ears into the cutout at the top of the head<ol><li>There are animals (such as the Lion and Gorilla) that use pegs and holes instead. For these you simply place the peg through the hole in the body and then squeeze the other side onto the peg.</li></ol></li><li>Slide the larger connector into the cutout at the front of the body</li><li>Slide the smaller connector into the cutout at the back of the body</li><li>Align to the two cutouts on the legs with the connectors and slide in</li><li>Repeat for the last leg</li><li>Enjoy!</li></ol>&nbsp;If you&#39;d like access to a Commercial License and exclusive designs not available anywhere else:<a target="_blank" href="https://patreon.com/designsbyMarcum" rel="nofollow noopener">Join me on Patreon</a>&nbsp;Filament used in product photography:<ul><li>Overture Matte PLA - Black</li><li>Overture Matte PLA - Light Gray</li><li>Overture Matte PLA - White</li><li>Overture Matte PLA - Light Brown</li><li>Overture Matte PLA - Chocolate</li><li>Overture Rock PLA - Rock White</li><li>Prusament PLA - Galaxy Black</li></ul>This community generated approximately $179 worth of points and boosts during the Animal Frenzy contest! On behalf of you all, I have donated $200 to the Fort Worth Zoo to assist in their conservation efforts. Thank you for all who took the time to show their love and support for my work.<blockquote><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000447508/design/2024-05-26_df146c068f725.png"></blockquote>

Wildlife Kit Card - Multiple Species

applications

Keenz Kustomz

Ever wanted to make your own Croc Jibbitz out of anything random?! Now you can. &nbsp;Print these little bases and you can super glue any objects you like onto it, just like my Cinderwing Gemstone Taddling

Croc Jibbitz Base

Crocs

reddadsteve

Babar is a fictional character who first appeared in 1931 in the French children's book Histoire de Babar by Jean de Brunhoff.After a hunter kills Babars mother he escapes the jungle and experiences a series of adventures in the big city. When Babar returns to the jungle, because of his travels and contact with civilization, he is appointed king of the elephant kingdom.Two parts of the model have built-in supports and therefore no other supports are required. Those two parts are also included without supports for those makers who prefer to use supports via their slicer.If you have the proper filament colors, no painting is needed.The assembled model is 230mm tall.EnjoyNote: the built-in supports remove very cleanly, however I recommend removing them with piers instead of a knife. ............................................................................................................Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: No Infill: 2 shells, 10% infillNotes: Refer to the notes below for helpful printing and assembly instructions. ............................................................................................................Building the model Colors (there are no multiple printed pieces)Grey: (eSun ABS - silver) head (includes supports for the mouth/trunk and the back of the head) head_nosupports (optional piece if you prefer your own supports) ear_left ear_right hand_left hand_right .. Dark Grey: (Paramount3D PLA - Graphite Grey) hat .. Red: (Bumat ABS - red) tie .. Dark Green: (Paramount3D PLA - St Andrews Green) vest .. Green: (Amazon basics PLA- green) jacket (includes supports under the right sleeve) jacket_nosupports (optional piece if you prefer your own supports) pants .. Black: (Praramount3D PETG - black) eyes (includes 2 pieces) buttons (includes four pieces) shoe_black_left shoe_black_right hat_band .. White: (ESun ABS - white) shirt_left shirt_right shirt_middle tusk_left tusk_right shoe_white_left shoe_white_right toenail_left toenail_right .. Yellow: (ABS from a sample pack) crown (optional) ............................................................................................................Printing and assembly tipsPrinting tips1-No supports are required. However, the head and jacket contain built-in supports. The built-in supports are typically tight but remove very cleanly. I've included the same parts without supports if you prefer to add your own. Both are large pieces, so choose wisely!2-Use your judgement for brims/rafts. Personally, I did add a large brim to the pants due to a print failure after a few hours. Better to add a brim to this part than waste your time with a potential failure.3-I used a brim on the optional crown for the same reason as the pants... Assembly tips:1-I used E6000 sticky craft glue to put this model together.2-The hat does not need to be glued in. This is important so that he can either be holding his hat in his trunk or wearing a crown on his head (or both if he was trying to please everyone at the same time!)3-I try and make the best models I can, however sometimes there is a small glitch. The head fits into the body nicely but a bit of the flat part shows in the back. You can minimize this with a little sanding if needed. My apologies.4-Please take care with left/right pieces. If you lose track of the left/right, be sure to take time dry fitting them to get them right.5-Ensure that the vest is snapped into the jacket before gluing other pieces around it.6-Refer to the assembly diagram as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to comment or to ask questions, feedback is essential to making better models.Please upload you makes. The more makes that modelers see, the more new models they will create!

Babar the Elephant

Cute

bestboi3d

Series of baseball prints featuring the New York Yankees 3 of 8&nbsp;Printed with 0.4mm nozzle and 0.08mm layers.16mm initial layerMinimum thickness.48mmPrinted with Numakers PLA+Filament used:Numakers Pitch Black (#0E0E10)Numakers Dark Grey (#52595D)Numakers Light Grey (#8C969D)Numakers Pure White (#F1ECE1)&nbsp;Layer Swaps:Start with Numakers Pitch BlackSwap to Numakers Dark Grey at layer 8Swap to Numakers Light Grey at layer 14Swap to Numakers Pure White at layer 20

Play Ball! New York Yankees #3

Hue Forge

Sitsero

<h2>Verdant Vigor: Ivysaur Multicolor Wall Art - Harness the Natural Power of Pokémon&#39;s Ivysaur!</h2>Embark on a lush journey into the world of Pokémon with our Ivysaur Multicolor Wall Art, a vibrant tribute to the captivating Ivysaur. This verdant masterpiece invites you to infuse your living spaces with the rejuvenating energy of Ivysaur, creating an atmosphere of vitality and growth in any room.<h3>Key Features:</h3>Ten Lush Filament Colors: Immerse yourself in a verdant oasis of colors! The Ivysaur Multicolor Wall Art boasts ten captivating filament colors, capturing the vibrant essence and untamed energy of Ivysaur as it thrives in nature&#39;s embrace. From deep greens that symbolize its connection to the earth to lively yellows that evoke the warmth of sunlight, each color contributes to a mesmerizing tableau that celebrates the beauty and vitality of the natural world.Dynamic Pose and Details: Witness Ivysaur in a moment of graceful vigor as it stands tall amidst lush foliage, leaves rustling with every gentle breeze. From the serene gaze that reflects its harmonious bond with nature to the powerful vines that weave a tapestry of life around it, every aspect of this majestic Pokémon is rendered with exquisite precision and artistry, capturing the essence of its natural spirit and immortalizing it in stunning detail.Versatile Display Options: Let Ivysaur bring a sense of vitality to your home or office space. Whether adorning your living room as a tribute to your love for Pokémon or gracing your personal sanctuary as a symbol of growth and renewal, this wall art adapts seamlessly to any environment, infusing it with a sense of natural beauty and harmony.<h3>Specifications:</h3><ul><li>Material: Any material (PLA recommended)</li><li>Filament Colors: Ten lush colors</li><li>Dynamic Pose: Rendered with precision and artistry, capturing Ivysaur&#39;s natural spirit</li><li>Display: Versatile edition, suitable for various rooms and spaces</li></ul><h3>Harness the Natural Power:</h3>Harness the natural power of Ivysaur with the Ivysaur Multicolor Wall Art. With its captivating filament colors, dynamic pose and details, and versatile display options, this piece promises to transform your living spaces into lush sanctuaries of vitality and growth. Share the rejuvenating energy, like, and rate the model to spread the captivating allure of Ivysaur with fellow Pokémon enthusiasts! Let the verdant vigor inspire dreams of harmony and renewal, weaving a tapestry of natural beauty and vitality that nurtures the soul and refreshes the spirit.