Doppelgang311

Jamburgg

Do you ever get annoyed as your yarn ball rolls away from you? This is the solution! It's easy to print, aesthetically pleasing and doesn't require any special bearings or assembly. Simply print the two pieces and voila!&nbsp;To give the print some weight so that it does not fall over, I have included three holes in the base in which you can glue some weights, I used some pennies but you can use anything you like!&nbsp;Print Guidelines:&nbsp;Walls/Perimeters: ≥ 3, the item benefits from some good layer adhesion and strength.Infill: Any (gyroid used in examples). Would recommend at least 15% infill.Supports: NoneLayer Height: 0.2mm RecommendedMaterial: PLA used here but any should work.&nbsp;&nbsp;&nbsp;

Rotating Heart Yarn Spinner - No Bearings Needed

Elizabeth 

Tom Fullen - Switch

I know there are many of these of the Moon however, I wanted to create my own to learn how to make other planets and other potential spherical objects. This Moon globe seems to be more detailed to me and upon sharing a picture of my make to Reddit, a few people wanted me to share this so here it is! This has an 80mm opening on the base to set on a 10cm LED lighted puck. I purchased <a target="_blank" href="https://share.temu.com/qjOKfzsDJGA" rel="nofollow noopener">this one</a> for another project but it worked out great for this.&nbsp;<a href="https://makerworld.com/en/models/61976#profileId-64438" rel="nofollow">Check out my Mars Lamp for the BambuLab LED Light Kit here!</a>&nbsp;Print Settings:.20mm Layers6 Walls100% InfillNo Supports &nbsp;For information on the NASA SVS CGI Moon Elevation Maps I used visit https://svs.gsfc.nasa.gov/cgi-bin/details.cgi?aid=4720

SVS NASA Moon Globe

Home

Meister Edel

Heyho&nbsp;Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But this one could not be worn as a necklace :D And the versions at Printables that could be worn as a necklace were unfortunately very fragile. Also, all the ocarinas I tested needed some touching up to get the tone to come out reasonably clear :/So I designed a lot back and forth and after many prototypes (yes I exaggerated a bit :) ) I constructed this easy to reproduce ocarina. Conveniently, I can easily distribute all the prototypes in our kindergarten :)It comes in 2 versions.&nbsp;4 holes: Easier for smaller children. 6 holes: Multiple notes to play.<figure class="image image_resized" style="width:63.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_um7aojusafcb.png"></figure>The ring on the rear side serves as an aid to prevent fingers from getting too close to the air outlet so that the sound is not affected.Skaling:You can increase or decrease the size of the ocarina! This is easily done in the slicer. But I have also prepared the Versions skaled to 80% and 120% for you.Tonally I prefer the 120% Ocarina. But for the kids the normal one does the job just fine! Printing instructions: I printed it with 0.15 mm per layer in PLA. But the material probably doesn't matter much and the smoother the surface the better! From 100%+ you can also print the models well with the 0.6 mm nozzle.Avoid a seam around the air outlet and check for good bridgin in that area.<figure class="image image_resized" style="width:58.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_quenyer9byg7.png"></figure>&nbsp;<figure class="image image-style-align-center image_resized" style="width:78.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_k37qry7wtzjs.png"></figure>Stringing: If you have problems with stringing you can use a hairdryer in combination with a zip tie.&nbsp;<figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_v6tm9pjsocnw.png"></figure>Necklace: You can use any cord/ rope through the eyes of the pig to hang it around your neck :P<figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/294240/2023-11-01_nepbcsodmdz9.png"></figure>&nbsp;And yah the piggies look so somewhat sad :P&nbsp;&nbsp;Have fun! If you like my work feel free to share it!

Music Instrument Kids Ocarina (Pig) necklace :)

Music

RealNationPrint

<h2>VERSION 2 is RELEASED!! 20g less - stronger - smarter ! <a target="_blank" href="https://makerworld.com/en/models/445673#profileId-352143" rel="nofollow noopener">https://makerworld.com/en/models/445673#profileId-352143</a></h2>&nbsp;&nbsp;Cockpit Phone Holder Clip v1&nbsp;An innovative 3D print that revolutionizes the way mobile phones are used in cars is the new mobile phone clip for the car cockpit. This unique accessory is specifically designed to securely and stably hold a wide range of mobile phone models and can be effortlessly attached to the dashboard or ventilation slots of the vehicle. Utilizing advanced 3D printing technologies, the clip is not only robust and durable but also light and compact, making it perfect for mobile use. Its innovative design allows for quick and easy attachment of the mobile phone, enabling the driver to use the device for navigation, hands-free calls, or entertainment without compromising safety. Furthermore, thanks to its flexibility and adaptability, the clip can easily be adjusted to fit different vehicle types and mobile phone models, making it an indispensable accessory for modern drivers.  Please note that for midsummer, it&#39;s advisable to print the holders with PETG, or even better, with ABS or ASA.&nbsp;<h2>VERSION 2 is RELEASED!! 20g less - stronger - smarter ! <a target="_blank" href="https://makerworld.com/en/models/445673#profileId-352143" rel="nofollow noopener">https://makerworld.com/en/models/445673#profileId-352143</a></h2><h2>  </h2>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/423769#profileId-327023" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000421128/design/2024-04-11_6d96144b55f638.png"></a>&nbsp;Here u can find the Desk Version of the Clip:  <a target="_blank" href="https://makerworld.com/en/models/423769#profileId-327023" rel="nofollow noopener">https://makerworld.com/en/models/423769#profileId-327023</a>&nbsp;&nbsp;THE ULTIMATIVE HOOK → CARBUDDY!! <a target="_blank" href="https://makerworld.com/en/models/425555#profileId-329178" rel="nofollow noopener">https://makerworld.com/en/models/425555#profileId-329178</a>TrashBin - Nintendo Switch Holder - Can Holder and More with just 1 Hook!!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000421128/design/2024-04-12_8948006ddb168.png"></figure>&nbsp;&nbsp;Funny &#34;scent tree´s&#34; pendant  <a target="_blank" href="https://makerworld.com/en/models/420970#profileId-323754" rel="nofollow noopener">https://makerworld.com/en/models/420970#profileId-323754</a> Multi CarClip: <a target="_blank" href="https://makerworld.com/en/models/420980#profileId-323752" rel="nofollow noopener">https://makerworld.com/en/models/420980#profileId-323752</a>&nbsp;Visit my other Model <a target="_blank" href="https://makerworld.com/en/@RealNationPrint/collections" rel="nofollow noopener">https://makerworld.com/en/@RealNationPrint/collections</a>  I&#39;d appreciate a like/follow and further support! Thank you Wanna buy me a coffee for my good work? <a target="_blank" href="https://www.paypal.me/Realmascha" rel="nofollow noopener">https://www.paypal.me/Realmascha</a>

Cockpit Phone Holder Clip v1

Cesar Pacheco

This is a three part sanding block, made to be very easy to put together.Scale as you like, but be wary when scaling down, the bolt may need more clearance.At 100% scale needs about 19cm of sandpaper.&nbsp;Recommended settings (best to use PLA+ or PETG)Main block: 20% infill or more, 0.2mm layer, no supports neededBolt: use 40% infill, ideally PETG, 4 wall lines, 0.1mm layer.Wedge: Use whatever settingsNone of the parts require supports.

Sanding Block / Sanding Tool

Tools

Ace3DPrints

This is a wall mount holder for Ego Edger, Stringer. 0.28mm layer height 3 wall 20% + infill no brim print without support Print on PETG is recommanded for strength

EGO Edger & String Wall Mount Holder

Out Doors

Jorge Rui

<h2>Introduction</h2>Disclaimer: This model is part of the Creator Program, when you purchase the Wireless MouseComponents Kit-002 through the links below, creators may earn an affiliate commission as a reward of theirwork.Hardware Kit: <a target="_blank" href="https://shrsl.com/4cpnt" rel="nofollow noopener">Wireless Mouse Components Kit 002</a>Recommended filaments: <a target="_blank" href="https://shrsl.com/4cvrb" rel="nofollow noopener">Matte PLA</a> or if you prefer <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Basic PLA</a>, that said, you can use <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4026304&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">any filament</a> you like as long is not TPU ;)&nbsp;<h2>Characteristics</h2><ul><li>With anthropometric dimensions between medium and large, it should be good for anyone with hands within this percentile;</li><li>It is oriented towards right-handed people;</li><li>In addition, to the usual rest area for the thumb, I also provided a rest area for the little finger, something that unfortunately the mouse I usually use does not have (MX Master 3);</li><li>4 button: Left, right and middle (on the scroll wheel) and a top middle button.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2023-10-21_706551f6f8569.jpg"></figure>&nbsp;You can find a monocolor and a multicolor version on the print profile. I advise you to test print the monocolor and see if it is ok for you, it is a fast print more or less 2 hours in total.&nbsp;<h2>Note</h2><ol><li>The mouse needs to be functional and tolerances are not the same has an injection mold part, so some zones have to be adjusted to better fit the 3D print process, on of does zones is the gap between the buttons and the rest of the shell.</li><li>The mouse needs to be 3D printed with the least amount of supports, and none or almost none supporting the external shell, this to limits the design</li><li>Last, this fits on bambu lab kit (version 002), I&#39;ve opted not to change their internal chassis, this way you can change tops easily :)</li></ol><h2>Change Log</h2><ul><li>08-11-2023 - Added a version without logo to the 3MF profile file.</li></ul><figure class="image image_resized" style="width: 39.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2023-11-08_532c0ee336a62.jpg"></figure><ul><li>26-05-2024 - A new mouse was released, the “Ergo Mouse”. You can find it here: <a target="_blank" href="https://makerworld.com/en/models/469851?designId=469851#profileId-385684" rel="nofollow noopener">Ergo Mouse I1</a></li></ul><figure class="image image_resized" style="width: 38.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000046520/design/2024-05-26_19eade05c2864.png"></figure>&nbsp;

"Manta" mouse - Bambu Lab Mouse Kit Compatible

Computer

Arnauz

sitting unicorn, my daughter loves playing with it

Sitting unicorn

Toys

xPengu

Custom PLA and PETG Print Profiles&nbsp;The Support Settings are meant for PETG interface for PLA printing or vice versa. For more info, please see this forum post: <a target="_blank" href="https://forum.bambulab.com/t/support-filament-petg-for-pla-and-pla-for-petg-and-more/5942" rel="nofollow noopener">Support Filament –&gt; PETG for PLA and PLA for PETG and more</a>&nbsp;Filament Tested: PLA: Bambu and SunluPETG: Bambu, Sunlu and OverturePlates tested on: PLA Cool Plate, Bambu Textured PEI Plate, AliExpress PEI, PEO, PEY Plates

Custom PLA and PETG Print Profile

Printer profile 

3D servis

Stackable box - no supports&nbsp;Full compatible box with lower high is here: <a target="_blank" href="https://makerworld.com/en/models/417099" rel="nofollow noopener">https://makerworld.com/en/models/417099</a><a target="_blank" href="https://makerworld.com/en/models/417099" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/834243/2024-04-08_9c01c4865de2f.jpg"></a>

Stackable box - no supports

storage 

onez

Gears&Differential that are compatible with brick systems, pick the ones you need out of the stl/step and delete the ones you dont want to use - print laying flat with supports if needed. For most strength print horizontal to ensure horizontal circular layers which are stronger and make cleaner geometry.

Brick COMPATIBLE Gears&Differential

Lego

Hugo

<h2>Update : I added the money clip There is now a version with and without money clip in the back.</h2>&nbsp;This is the second version of my cascade card wallet, featuring a similar appearance but thoroughly revamped.<h4>Filaments used in the pictures : <a target="_blank" href="https://formfutura.com/?aff=7" rel="nofollow noopener">Li</a><a target="_blank" href="https://formfutura.com/product/refill-petg/?aff=7" rel="nofollow noopener">nk</a></h4><ul><li>FormFutura Refill PETG Light Grey</li><li>FormFutura Refill PETG Iron Grey</li></ul>Here are the key updates:<ol><li>The new version can accommodate 6 cards, compared to 5 in the previous iteration.</li><li>The popup mechanism is now easier to detach from the printer, eliminating the need for holes in the back to crack open the mechanism.</li><li>The retention mechanism has been entirely redesigned to secure cards from the top rather than the side. This ensures more secure card placement, and the wallet is compatible with any number of cards, up to 6.</li></ol>This model still demands a highly precise printer, as the internal mechanism is separated from the wall by a mere 0.2 mm.I have not yet designed a money clip for the back, but it will be included in a future update.<h3>Printing :</h3><ul><li>Nozzle size : 0.4 mm</li><li>Layer height : 0.2 mm</li><li>PLA and PETG both work</li><li>No support needed</li><li>The STL is already oriented, the model is printed upright</li></ul><h3>Freeing the mechanism :</h3>Force on the slider to crack it open :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/eeee7a40-93e7-4a98-a4dd-e0b83a3a72ca/20240310_165015.jpg#%7B%22uuid%22%3A%226fac39e0-5c87-4b27-a4d5-f723c113ad5e%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>If it is not enough, you can push the pivot on the back :<figure class="image image_resized" style="width:50%;"><img src="https://media.printables.com/media/prints/798465/rich_content/ebdb1922-7c49-48e6-b2dc-037afe421c6a/20240310_165005.jpg#%7B%22uuid%22%3A%225b8ad44e-f5c1-49dc-be6b-8d84b6ee539c%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>Enjoy :)

Cascade card wallet V2

Personal Items 

ed.burnett25

Yet another poop chute design. Wanted to create my own for the small space I have around my printer. Works very well and is printed with no support. Enjoy