Printed smoothly and is working great on my fly tying table

Worked really well and very handy in the kitchen.

printed fine. Very light but adequate for the job. Fits the dry cell opening well and makes the dessicant job a breeze. Thank You

Printed well and works great , a useful little tool

Flipped version worked gret with the dimensions spot on for Sawstop industrial

Printed well. Used a 50mm x3mm neoprene O ring inside and it seals well. Works a treat

Superb! Unable to purchase this size anywhere so great to have. Works perfectly and printed well. Kudos

Really good clip for my Festool. Note , must have 36 mm hose and 8mm power cord for this clip. works a treat if you have those. Good print thank you.

Fits a 1kg bag nicely. Printed well with everything in place. Only slight drawback is some flex in the long arm means sealing is not perfect but all in all love it

Perfect - just what i needed for my slide out trays. Needed a lot of support in the print due to the angle of base to handle. Edges on handle were prominent - maybe more comfortable with a slight fillet. A great handle though

Printed well. Unfortunately didn't fit my Sidchrome or Accud calipers well but worth a try. Will keep looking.

Really good print. Works well with the M5 bolts. Thank you

Printed well and fit nicely. Will make those dry fits so much easier!

Perfect bead to function as a holder on my ski skins - randonee tip style. An unusual use but the flared opening seated the knot beautifully. Thank You.

Perfect print. Replaced my broken curve and then some with the mini curves Quick smooth print in PLA. Thank you!

Reall y good accurate print. Useful toll and good fit to bolts. Well done thank you

For some reason the edges of my print weren't sharp on the inner corner of the cut out so very it was very tight in the slot. May be my issue and will try again at a lower speed and finer layers. Rest of dimensions were spot on. Will be very useful in my shop!

Great design and printed well.Perfect for a lightweight travel case! Fitting rim slightly fiddly, clothes peg clamps helped! A little too much play in the hinges would be my only area for improvement. Looks sharp! Awaiting magnets.

First rate print.Fitted blade perfectly and works well. Thank you!

printed well. Works well for those tight corners and side jobs. Slight problem with jaws opening when trying to grip smaller nails., pivots on back of jaw and springs tip open..