0.2mm layer, 2 walls, 15% infill

0.2mm layer, 3 walls, 15% infill

0.2mm layer, 2 walls, 15% infill

0.2mm layer, 4 walls, 100% infill

0.24mm layer, 2 walls, 15% infill

The magnet-enabled model has been refined, now featuring an integrated pause for magnet insertion and a reinforced rubber band hook The magnets for both components are designed for uniform orientation and are to be introduced in two distinct stages Furthermore, a judicious increase in phase angle compensation may be considered

I have set it up, I suggest printing a test part first. If there are no issues, then print the rest. If there are problems, use scaling to fine-tune

0.4mm nozzle, 0.2mm layer, 2 walls, 15% infill

Print with the fastest settings that produce sufficient strength with 2 walls