user_2857927862

Source robotics

FOR THE MOST UP-TO-DATE ASSEMBLY MANUAL AND STL FILES GO TO GITHUB: Github: <a target="_blank" href="https://github.com/PCrnjak/PAROL6-Desktop-robot-arm" rel="nofollow noopener">https://github.com/PCrnjak/PAROL6-Desktop-robot-arm</a>PAROL6 is 6 axes desktop robotic arm. It is a robotic arm whose design approach is driven by real needs from a robotic education standpoint, small automation, and scaling from RnD to production. It is the culmination of devolvement and feedback of 2 previous robotic arms I made, both being very successful open-source projects. PAROL6 uses precision planetary gearboxes and belts with careful placement for optimal weight distribution. The design is modular and allows easy addition of closed-loop drivers. From the software side, it uses the custom protocol to allow for industry standard 60-100 Hz loop times. Modern GUI is inspired by industrial and cobot interfaces where all standard ways of control are implemented (resolved rate, cartesian level control, joint level control, motor jog...) It includes a simulator to test your programs without needing a physical robot. PAROL6 is feature-rich with an Isolated I/O, CAN bus, and compliant gripper...All information on how to build and how to use PAROL6 is on GitHub: <a target="_blank" href="https://github.com/PCrnjak/PAROL6-Desktop-robot-arm" rel="nofollow noopener">https://github.com/PCrnjak/PAROL6-Desktop-robot-arm</a>Join discord: <a target="_blank" href="https://discord.gg/prjUvjmGpZ" rel="nofollow noopener">https://discord.gg/prjUvjmGpZ</a> Join forum: <a target="_blank" href="https://discourse.source-robotics.com/" rel="nofollow noopener">https://discourse.source-robotics.com</a>Follow the project on YouTube: <a target="_blank" href="https://www.youtube.com/@source-robotics" rel="nofollow noopener">https://www.youtube.com/@source-robotics</a>Follow the project on Instagram: https://www.instagram.com/source_robotics/If you are interested in buying a kit or assembled robot send us an email on: Info@source-robotics.com

PAROL6 3D printed desktop robotic arm

robots

FRP233

Speaker box for a 80mm (diameter) speaker. How to built it: <ul><li>Use 10x M3 plastic inserts for the covers</li><li>Use 4x M4 plastic inserts for the speaker</li></ul>These inserts need to be melted into plastic after printing the case.Inside the case is a small hole, for the cables of the speaker. The hole goes out of the back and can be closed from the inside with a small amount of hot glue.The distance from the M4 speaker screws are the following: 64.5mm&nbsp;The result is very good.Happy printing

Speaker box for 80mm speaker

pi core player bits

3DPmom

<figure class="media"></figure><img class="image_resized" style="width: 30.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/b50369d8-d175-46ad-80d6-b86a1393e919">These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the boosters. The larger rocket has four small boosters and the smaller rocket has one large booster.  These make great little gifts or party favors 🚀&nbsp;<img class="image_resized" style="width: 30.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/41d3f34e-0eac-43be-ba01-6c384316d3ca">Layer Height 0.2mmPLA works great15-20% InfillSupports needed for the area around the boosters on the Large Rocket&nbsp;Dimensions of Large Rocket: 4in x 2 3/8inDimensions of Small Rocket: 3 1/4in x 1 7/8in&nbsp;There are two ways you can print these rockets (I included both in their print profiles):<ol><li>Print the complete rocket: this prints great but if you want multi-color for the boosters (and/or fins) it’s going to take some time (I found 8-10hrs)</li><li>Print the boosters first, print the rocket second pausing at layer height 15.6mm for the large rocket and 30.6mm for the small rocket, drop the boosters in and then continue printing. This method is much faster:)</li></ol>&nbsp;In the print profile for the small rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the boosters, so they can be printed separately (make sure to print the boosters first:)&nbsp;In the print profile for the larger rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the 4 sets of small boosters so they can be printed separately (again make sure to print the boosters first:)&nbsp;Note: supports are needed for the larger rocket at the base around the rings for the boosters. I have included those supports in my print profile. (Also note if you are printing plate #3, I did not include supports in the booster chambers so that they are clear to drop the boosters in:)&nbsp;<img class="image_resized" style="width: 30.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/5e3a3622-4ff3-47e6-adc2-303a5155681a">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/e757d34e-1fcd-4b04-b6fe-8c0d913c3a49">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing these…they’re a blast 🚀

Rocket with Boosters (2 Sizes)

rockets

nrdaeger

I 3D modeled collar stays for my dress shirts after losing the ones that came with it.

Collar Stays

useful bits

EFFEG studio

I wanted to create this practical and easy-to-print shoe organizer.It fits my winter shoes (size 44 EU) very well and even 2 pairs of my daughter’s shoes!Convenient for saving space and organizing!&nbsp;If you want, u can cut it by 2cm to reduce printing time a little bit!&nbsp;Enjoy!&nbsp;&nbsp;-- PRINTING PROBLEMS -- I know how frustrating it can be to have problems during a print, and I’m happy to receive constructive criticism or suggestions about the model, but please always calibrate the flow and if you have adhesion problems, try using the brim or a gripper. All these fails are not due to the model.  All my files are tested before being published and the print profile with which I succeed is the one I publish.  Thank you very much for your understanding and happy printing to everyone!

SHOES ORGANIZER

marikondo

Not a remix, just sliced for P1S. Original work is credited to https://makerworld.com/models/147347 by @Calminata.&nbsp;Great design, worked first time for me in PLA.

M6 Screw Tensioner

tools and accessories

Svenkasulke

Ich habe die Teile gedruckt, weil meine Familie gerne Diamond Painting machen. Mir ging es aufn Sack die ganzen Jogurtsbecher hier stehen zu haben:).