Sir Printalot

Stuff Jon Makes

The bottom cap included with the skimmer directs outflow downward, which can disturb the substrate in shallow tanks. Swapping the bottom cap for this print redirects the skimmer's outflow forward (and to some extent, diagonally upward), allowing for use in shallow tanks.&nbsp;The cap part is the same height as the original cap, but the outflow grille adds 7mm to the front of the skimmer. The tank pictured is 18cm/7in tall.

Flow Redirector for OASE CrystalSkim 350

Aquarium

Antee

Detailed AT-TE model first seen in the episode “Attack of the Clones”.The main cannon and the smaller ones are movable, as are the central paws and the toes. Approximately 40 cm long and 20 cm high, this static model makes a great impression when displayed.I printed all the pieces with pla in 0.10 detail while the larger ones in 0.15

At-Te star wars

Modelle

Mars3D

3D printed fishing float from 6 pieces so that everyone can put whatever colors they want.

Fishing Float

Angeln

Martin

This modular hydroponics tower lets you grow a large amount of plants without the need of lots of room. Each module fits 3x 50mm (2 inch) pots and has the water tube running up the middle. Just stack as many modules as you require.&nbsp;Each module is designed to fit 3 M3x4x5 heat-inserts and bolt together using M3 x 6mm bolts.&nbsp;I designed this to fit on a small 3D printer, with a build area required of 170 x 170.&nbsp;At the bottom of the stack you need the Base with a 16mm barb fitting and the optional base clamp (to clamp to the other side of a container lid) and attach it to a submersible pump.&nbsp;At the top you push in the shower head and bolt on the lid. I drilled out the holes of the top module to 4.5mm to fit in 3 heat-inserts to make this secure but it does function fine without the lid bolted down.&nbsp;Have fun growing!

Modular Hydroponics Tower

Garten

geo.luki

Simple door catch with using 6, 9 or more pieces of 8x3 mm neodymium magnets. Magnets do not need to be glued. The wall the magnets touch is only 0.4 mm thick, so I recommend leaving the Arachne wall generator on.  To increase the magnetic force, simply add 3 or more magnets to the part “magnetic catch pt2” (located on the door frame). You can choose between a thinner version for the door leaf for 3 magnets, or a stronger one for 6 magnets. Optional: I printed the &#34;magnetic catch pt1.stl&#34; part (the part on the door leaf) from flexible material with Shore 41 D hardness and 100% infill. Because I don&#39;t like the sound when two plastic parts snap together, the flexible material eliminates that.

Magnetic door catch

Haushalt

Toprototyp

The model is designed to be printed in place without any supports.&nbsp;Tips for printing this model: - orientation: all uploaded files are in the correct orientation, - scale: do not scale the model, - temperatures: depending on the material used and the manufacturer's guidelines, - layer height: 0.2mm or less, - number of outlines: 2 or more, - infill: 15% or greater, - brim: not required, - supports: not required,

TRASH CAN WITH SWING LID

Nicole

Mattes

Print yourself a mighty articulated orca. It is easy to print in one piece, no supports needed. It works well with basic PLA.If you have a multi color systen, i have included m3u files. Those are pre painted bu you have to adjust your printer Settings. &nbsp;I don't recommend to scale it down because the articulation in the tail gets to small.&nbsp;If you like orcas, check out <a target="_blank" href="https://makerworld.com/en/models/206936#profileId-227041" rel="nofollow noopener">JD3Ds Orca</a><a target="_blank" href="https://www.printables.com/model/770930-articulated-orca-singlecolor-and-multicolor" rel="nofollow noopener"> </a>aswell!&nbsp;Also, if you like Plants, take a look at my new <a target="_blank" href="https://makerworld.com/en/models/244254#profileId-260769" rel="nofollow noopener">Snap Fit Planter Stands</a>

Articulated Orca

Kommerziell

Creativity Lab

Tired of destroying your fingers? Try this!

Handle for Shopping Bags

Philipp

jaayjeee

Easy print Bowser Bracelets for any costumes, printed these for my son for Halloween just past. (below)&nbsp;They can either be printed multipart, with Black for the Bracelet and White for the Spikes, superglue them in the circles and you're done.&nbsp;Have also included an AMS file prepainted and test printed on the A1 Mini. Have included a test ring to print and figure out scaling, it's a 50mm internal radius, scale it as you need before printing off a bunch of the full bracelet&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/185547/2023-11-19_6b7766bdc586d.jpg">&nbsp;All of my projects are 100% Free. However if you'd like to support me, feel free to buy me a coffee<a target="_blank" href="https://www.buymeacoffee.com/jaayjeee" rel="nofollow noopener">Buy Me A Coffee</a>

Bowser Bracelet Multipart and AMS

Kinder

MatejB

Tablet or phone holder for car backseat. Mounted on front seats headrest.<figure class="media"><div data-oembed-url="https://youtu.be/daxH6tBSDYI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/daxH6tBSDYI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>You can try to print mount for my Toyota headrest dimensions. If it will not fit, you can change it in f3d file in Fusion 360. There go to Modify → Change parameters. Check the photos for parameters descriptions.&nbsp;The mounting dimensions between mount and holders are compatible with <a target="_blank" href="https://www.printables.com/model/449110-universal-tablet-holder-for-carsheadrest-fully-pri" rel="nofollow noopener">this project</a>. So you can combine mounts and holders between these 2 projects.<figure class="image image_resized" style="width:30.15%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433530/design/2024-04-18_c0140bbdf2bb.png"></figure>&nbsp;Included phone and tablet holders with printed spring. Tablet holder is in 2 variants, for clamping of 100-140mm dimensions, and 140-180mm dimensions.&nbsp;Notes:<ul><li>You can print headrest mount with PETG, but based on my experience, in hot summer days the PETG deforms under the load. So you may loose flexible properties. Recommending to print with material with higher temperature resistance than PETG.</li><li>I printed phone/tablet holders from PETG and so far didn&#39;t have any issue.</li><li>Don&#39;t try to configure negative tilt angle in parametric mount. It will work as a positive value. In order to achieve negative tilt, just flip printed part upside down since it is symmetric in this direction.</li><li>After the print, there might be tiny bonds between the sliding and static part. You may need to use some tool to initially push the sliding part. Then sliding has to work fine.</li></ul><figure class="image image_resized" style="width:287.812px;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433530/design/745d8e41-120b-4a8c-a58e-ce08e7a852c7.png"></figure><ul><li>On demand, in the files is available 3mf project for tablet holder for 180_210mm dimension. However this tablet holder was not tested by me, so please keep in mind this. Feel free to share you experience with it.</li></ul>

Parametric tablet/phone holder with printed spring

Auto

biosniper

Rack shelf for 2.5Gb “Hisource” Switch to fit 10inch small racks. Ideal for the home lab etc.Lots of 2.5Gb switches use this form factor so will probably fit other switches.&nbsp;Designed to be a tight push fit so has no additional rear supports etc, however you could put double-sided tape or similar at the front to stop it being able to be pushed back when cables are put in if its not tight enough for you.Raw Model is not pre-rotated for printing but I recommend printing it face down. Print profile includes rotation.&nbsp;Probably over-engineered but I don't like saggy rack shelves 😂

2.5Gb Switch mount for 10inch / 19cm mini rack rack HomeLab

Server

3DPrintCreator

Bambulab AMS Dryer silicagel Perfect Fitting Fast Printing No Supports Needed X1C P1P P1S Trending