so特别

工具类

laisch

The model consists of two parts:<ul><li>shovel</li><li>handle</li></ul>It can be printed without supports if you orient it like shown in the picture.The connection between the handle and the shovel is a tight fit. Optionally it can be glued in place with some ca- glue.The cat inlay can be printed in a different color (2 layers on 0.2mm layerheight). Just load the models for the handle and the inlays together and set a different color for the inlays.

Cat Litter Shovel

猫咪专用

blecheimer

Describtion: There are a lot of AMS risers on makerworld and I looked at all of them. Most of them have the same issue: They are large, beefy and need supports to be printed - that means lots of filament are necessary. I wanted a riser, that uses less than one spool of filament, is very robust, lets me open the top cover so that it stays open for ventilation, has a sufficent opening at the top to work on the printhead and of course has enough room for the AMS. So I designed my own AMS riser. It is so robust that I can stand on it. With my print settings (see below) it uses 840gr filament and can be printed in about 24 hours. All my settings and the part arrangement on five plates is included in the 3MF file. A step file for your own modifications or remixes can also be downloaded.&nbsp;Dimensions: 409 x 369 x 87 mm 840 gr&nbsp;Material: I recommend a sturdy filament like PLA, PLA+ or PLA-CF. Maybe PETG will work but the stationary tensile strength of PLA is just higher. I have chosen PLA-CF from Eryone because I always wanted to try it.&nbsp;Print settings: You can find my settings in the 3MF file together with the part arrangement on five plates. With my settings the print time is about 24 hours and you will need 840gr filament. for the parts: 4 walls 5 tops 5 bottoms 25% adaptive cuboid infill 0.2mm layer height no support for PLA-CF (Eryone) Nozzle: 0.4 mm Nozzle-Temp: 225°C Bed-Temp: 60°C Cooling: 100% @ second layer onwards Volumetric Speed: 12 mm³/s Outer Wall: 150mm/s Inner Wall: 250mm/s Infill: 200 mm/s Top Surface: 150 mm/s Bridge: 50 mm/s&nbsp;Assembly: Put the parts of the lower half together using the provided connectors. I highly recommend that you use superglue or 2K expoy on the part interfaces for extra stability. Do the same with the top. Then slide the top half on the lower half and secure it with glue. The designed gap between the parts is 0.15mm - that should be no problem for a Bambu printer.&nbsp;&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by-nc-sa/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY-NC-SA 4.0</a> You are not allowed to copy this model to other 3D printing websites without my permission.

Robust AMS Riser - printable without support

增高

vandragon_de

Emma is based on the Emma Maersk but adapted to my bathtub ships. The game play value this time is very high, just like the printing time. Many containers may be loaded and unloaded for play. This not only pleases the bathtub captain but also the operator of the printer.So let's get to the fun of the game.<h3>Accessories</h3>A great addition to Emma is the Depronized crane.<figure class="table" style="width:30.47%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><a target="_blank" href="https://www.thingiverse.com/thing:3411612" rel="nofollow noopener"><img src="https://cdn.thingiverse.com/renders/77/28/8a/0f/31/fcb8be3201bd4283097d7df60d83a293_preview_tiny.jpg" alt="image"></a></td><td><a target="_blank" href="https://www.thingiverse.com/thing:3411612" rel="nofollow noopener">to the cran</a></td></tr><tr><td><a href="/thing:3411612" rel="nofollow"><img src="https://cdn.thingiverse.com/renders/e9/e6/03/09/3b/233d32ad129990d4c583c6db55ea5e17_preview_tiny.jpg" alt="image"></a></td><td><a href="/en/models/26805" rel="nofollow">EMMA - a Maersk Ship</a></td></tr><tr><td><a href="/thing:3411612" rel="nofollow"><img src="https://cdn.thingiverse.com/renders/01/da/66/da/40/f3ccdd27d2000e3f9255a7e3e2c48800_preview_tiny.jpg" alt="image"></a></td><td><a href="/en/models/26768" rel="nofollow">COS - the Container Ship</a></td></tr><tr><td><a href="/thing:3411612" rel="nofollow"><img src="https://cdn.thingiverse.com/renders/95/c9/cb/bf/33/233d32ad129990d4c583c6db55ea5e17_preview_tiny.jpg" alt="image"></a></td><td><a href="/en/models/42037" rel="nofollow">VOS - the Supply Ship</a></td></tr><tr><td><a href="/thing:3411612" rel="nofollow"><img src="https://cdn.thingiverse.com/renders/2b/ab/b4/3d/06/b15c7bf3c7975a2ec6eec02ee4d9c710_preview_tiny.jpg" alt="image"></a></td><td><a href="/models/42033" rel="nofollow">to the trucks</a></td></tr></tbody></table></figure> Notes: Multicolour was made possible by changing the filaments. &nbsp;silver leaves layer - 0 - 10.40mm (Layer 0-52)red from - 10.40-11.4mm (Layer 52-57)blue from - 11.4-23.60mm (Layer 57-118)White from - 71.8mm - END (Layer 118-359)Funnel Settings:Black from - 0 - 7.0mm (Layer 0-39)Blue from - 7 - 11.6mm (Layer 39-58)Black from - 11.6 - End (Layer 58-84)

EMMA - a Maersk Ship

模型摆件

锅盖架-Pot lid rack

P1S X1C主动散热增高