user_2810101560

heyderekp

This is the start of a project to have a modular system for rimmed tanks for holding anything need to hang on the side of your rimmed tank. &nbsp;Currently, this system is only the plant holder, which can hold rooted plant trimmings, or even hydroponic substrate with plants. This bracket setup will fit rimmed tanks ranging from 120, 75, 60, 55, 20, and 10 gallon tanks (Most are Aqueon brands).&nbsp;The goal is to eventually have multiple detachable components so you don't need to have another bracket just to add something new to the tank. &nbsp;For printing I had the best luck with speed/quality by printing the bracket on it's side with manual tree supports on the inside of the dovetail. You can print it upright and use supports, but it takes longer and uses more filament.

Modular Rimmed Tank Plant Holder

maybe-pet

Hiko 3D

Love Pixel Keycap ⌨❤&nbsp;a new keycap, easy to print in multiple colors 💚💛🧡💙&nbsp;You can create it to decorate your keyboard ⌨🎨&nbsp;I recommend not using such high speeds and only need supports on the internal part. &nbsp;This design and many more can be found on my patreon 👈&nbsp;---&nbsp;&nbsp;&nbsp;&nbsp;

Love Pixel Keycap

make 3D

<h2>Summary</h2>I designed and printed these wall mount for my Penny Boards. These are super easy to print and install. In my case they hang right next to my door, so they make it possible for me to just crab and go without having to locate the board in my apartment. Also it looks great on the wall at the same time! Rafts: Doesn't Matter Supports: NoResolution: 0.2 Infill: at least 25%&nbsp;Notes: Two pieces of the STL file is needed.

Penny Board Wall Mount

maybe-sports

Kardes.Design

Update: <a target="_blank" href="https://makerworld.com/en/models/84473#profileId-90295" rel="nofollow noopener">CMYK lithophanes released</a>!Introducing the Arctic Glow Christmas Lantern, here to transform your holiday decor! Simply switch out the decorative panels to create a whole new look for your lantern. And with new designs added regularly, you&#39;ll never get tired of the same old holiday decor.&nbsp;The <a target="_blank" href="https://makerworld.com/en/models/31480#profileId-33790" rel="nofollow noopener">panel template</a> is available for the community to remix as they wish.&nbsp;<ul><li>Effortless Printing: No support material needed for printing, making it a hassle-free experience.</li><li>Works seamlessly with <a target="_blank" href="https://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab&#39;s LED lamp kit</a> and a generic LED strip.</li><li>Assembly Made Easy: Snap together with ease - no glue or extra hardware required.</li><li>Everything is printable on all Bambu lab printers including the A1 mini</li><li>Fully compatible with my <a target="_blank" href="https://makerworld.com/en/u/2706903410/collections/57878" rel="nofollow noopener">mystic lamp panels collection</a>. Panel templates are available to remix</li><li>Lids are compatible with my other <a target="_blank" href="https://makerworld.com/en/models/58185#profileId-59926" rel="nofollow noopener">Christmas lamp</a> and other future designs will also be compatible.</li></ul>Print instructions:colored 3MF Files with perfect print settings are available for all models!Main structure:Designed to be 100% support free.Layer height: 0.2Infill: 10%Bottom/top layers: 4Walls: 2 walls for the base and 4 walls for the top&nbsp;Panels:&nbsp;Print directly with from the print profile and easily change colors. I separated each color change to a separate object.You can choose green for example instead of Blue by just changing the second layer object.<figure class="table" style="width: 622.263px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-17_3e064ce3d26e1.png"></figure></td></tr></tbody></table></figure>&nbsp;or&nbsp;Use the Non AMS 3MF files with pre programmed pauses for color changes. This method works without the AMS.&nbsp;Colors used:Lamp:<a target="_blank" href="https://shrsl.com/4k35u" rel="nofollow noopener">Alpine Green Sparkle</a><a target="_blank" href="https://shrsl.com/4k36k" rel="nofollow noopener">Crimson Red Sparkle</a><a target="_blank" href="https://shrsl.com/4k36a" rel="nofollow noopener">Matte Ivory White</a><a target="_blank" href="http://shrsl.com/4k3a5" rel="nofollow noopener">Matte Blue Ice</a><a target="_blank" href="http://shrsl.com/4k3a6" rel="nofollow noopener">Gold silk</a>Panels:<a target="_blank" href="https://shrsl.com/4k36a" rel="nofollow noopener">Matte Ivory White</a><a target="_blank" href="http://shrsl.com/4k3a5" rel="nofollow noopener">Matte Blue Ice</a><a target="_blank" href="https://shrsl.com/4k35q" rel="nofollow noopener">Matte charcoal</a><a target="_blank" href="https://shrsl.com/4k35u" rel="nofollow noopener">Alpine Green Sparkle</a>&nbsp;Lithophanes:&nbsp;Please download the 3MF file or use the print profile.You can also make your own lithophanes with this amazing website <a target="_blank" href="https://lithophanemaker.com/Framed%20Lithophane.html#processing" rel="nofollow noopener">lithophanemaker.com</a>Simply fill in these values after uploading your image and you will get a panel that fits perfectly in the lamp.<figure class="table" style="width: 461.468px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-06_8f2f6ecf71ac2.png"></td></tr></tbody></table></figure>&nbsp;&nbsp;Lighting:&nbsp;All pictures were taken with the <a target="_blank" href="https://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab Led lamp kit 001</a> used. It is perfect for the lamp and provides more than enough lighting.&nbsp;Print the LED channel if you don&#39;t have the Bambu lab LED kit.&nbsp;The channel can fit around a 2 meters. you do not need to cut the strip if its longer. instructions below.&nbsp;<figure class="table" style="width: 278.968px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><a target="_blank" href="https://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab LED lamp kit</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-17_de10ecf9a5ffa.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-17_740b37c2a6e7b.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-11-17_ebd645943cbff.jpg"></figure>&nbsp;</td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Generic LED strip( 2meters)</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000066428/design/2023-10-24_572427393436.gif"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Commercial use license: <a target="_blank" href="https://www.patreon.com/user?u=103482126" rel="nofollow noopener">Patreon</a>&nbsp;Hi, I&#39;m a student and love creating functional and beautiful designs optimized for 3D printing.if you like my work consider supporting me with these options:<ul><li><a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86" rel="nofollow noopener">Paypal</a></li><li><a target="_blank" href="https://www.buymeacoffee.com/KardesDesign" rel="nofollow noopener">Buymeacoffee</a></li></ul>&nbsp;

Arctic Glow Christmas Lantern LED lamp kit 001

xmas

Chris1974

<h2>Summary</h2>Often LED strips come loose in corners or at sharp turns. This clamp prevents that from happening, keeping everything nice and straight.

LED strip clamp 10mm

maybe-led

Eugen.Muehl

Die Getränkehalter von Tesla sind leider nicht für kleinere Dosen geeignet, egal ob 250ml oder 0,33l. Deshalb kam die Idee auf, einen Getränkehalter zu entwickeln, der genau diese Lücke füllt. Diese Idee entstand bereits vor 1,5 Jahren und wurde seitdem mit verschiedenen Materialien getestet.&nbsp;Leider stellten sich PLA und PETG als ungeeignet heraus, da sie im Sommer weich werden. Daher empfehle ich dringend, wenn Sie planen, den Getränkehalter zu drucken und im Auto zu verwenden, dass Sie ihn in ASA drucken.&nbsp;Für den Zusammenbau benötigen Sie 4 O-Ringe für die Arme, die das Getränk zentral halten, sowie etwas Schaumstoff. Für die Schaumstoffteile sind Maße von 6 mm Breite und 1 mm Dicke sowie 12 mm Breite und 1 mm Dicke erforderlich. Der Schaumstoff schützt den Kunststoff vor Kratzern beim Einsetzen in den vorhandenen Getränkehalterausschnitt.O-Ring Maße 20mmx3mm&nbsp;<h2>Video </h2><figure class="media"><div data-oembed-url="https://youtube.com/shorts/lwg_62UW5lo?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=lwg_62UW5lo"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/lwg_62UW5lo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;&nbsp;Englische Version:Unfortunately, Tesla's cup holders are not suitable for smaller cans, whether 250ml or 0.33l. This led to the idea of designing a cup holder that fills this gap. The concept originated 1.5 years ago and has been tested with various materials since then.&nbsp;Unfortunately, PLA and PETG proved to be unsuitable as they become soft in the summer. Therefore, if you plan to print the cup holder and use it in your car, I strongly recommend printing it in ASA.&nbsp;For assembly, you will need 4 O-rings for the arms that hold the drink in the center, as well as some foam. The foam pieces should be 6 mm wide and 1 mm thick, and 12 mm wide and 1 mm thick, respectively. The foam serves to protect the plastic from scratches when inserting it into the existing cup holder cutout.O-ring dimensions 20mmx3mm

Tesla Cup Holder

maybe-car

OscarTheCat

Montessori High Harrypotter inspired.baby's retina and brain will thrive if you provide them with continuous visual stimulation&nbsp;if you own a Bambu Labs X1/P1 or A1 you can simply load the presliced bed.Otherwise you have to swap filaments mid print or paint them yourself by hand.

MONTESSORI CONTRAST HARRY POTTER INSPIRED

maybe-kids

KYZ Design

Update 17/09/2023<ul><li>Added “HSW Ez-V1 Round Object Holder - 65mm Left”</li></ul>Update 29/04/2023<ul><li>Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed adhesion for ABS/ASA, more secure fit with easier clipping, less side-to-side movement when installed and a cleaner look.</li><li>Added 2 base clips for remixing.</li></ul>Update 24/04/2023<ul><li>HSW Simple Hook 50mm Type 1 v1.1 added - stronger vertical section</li><li>3 “Ez” hooks added for easier install - these work better for PLA wall pieces, and the firm ones work better for PETG wall pieces.</li></ul>---I wasn't happy with the current hook designs as the layer direction was always sub-optimal, seemed wasteful and they do not hook on securely. Here are some easy print strong designs. No screws or supports needed and no need to print separate pieces to be able to mount them.You will need good first layer adhesion - clean your build plate and get your first layer squish right or use a brim if you are using a warp-y material.Print setting recommendations:Material: PLA, PETG, ABS, ASA (PETG hooks will be a little less secure due to the reduced stiffness)Temperature: print on the hotter end of your material's temp range, the overhangs are 45 deg at most so it should print fine0.4mm nozzle, 0.25mm all layer heights2 walls, 30% grid infillIf you have issues with fitment, you can try scaling it in only the "vertical" direction by adding or removing 1% or 2% (vertical direction when installed, not when lying flat) to give the detents more or less bite. Alternatively, try printing outer walls first for better dimensional accuracy.Installation and removal:Install like a pegboard hook - get the top in first, then the bottom.Remove by pushing up on the hook.Make sure you install your Honeycomb the right way around! It seems to be a very common mistake. The thicker part of the honeycomb faces YOU. These hooks will not fit properly if you have your honeycomb the wrong way around. I made a diagram to clarify:<figure class="image image_resized" style="width:53.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/131755/2023-09-25_nppzjja4u8d4.png"></figure>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.&nbsp;To support me, simply share my models :)&nbsp;

Easy Print Super Strong Hook - Single Piece - No Screws - No Supports - HSW Honeycomb Storage Wall

BlawkFireDesign

A base part for the Modular Moss Pole - Roman Style here:&nbsp;https://makerworld.com/en/models/373140&nbsp;I decided to upload this by itself due to the NSFW nature of the file

Atlas Base for Modular Moss Pole - Roman (NSFW)

maybe-garden

wayton98

Wrist brace for hand, if your feel pain in your wrist you can try this solution.&nbsp;Instrucions:Take a paper pattern modelled on the patient&#39;s wrist.&nbsp;After measuring, draw the shape in the software of your choice and design a solid shape.&nbsp;Print flat from PLA (for its low heat resistance - above 60°C) and with 100% fill.&nbsp;Dip the printed part into hot water.&nbsp;Take the part out of the water with something (its still hot), shake it and wait a few seconds for all the hot water to evaporate, and place it directly on the wrist of the person who is going to use the part (you may also use a piece of cloth to protect the wrist from hot drops).Use your hand to shape the support and let it to cool down to freeze the shape.&nbsp;If its not perfect, repeat the process until its correctly modelled.

Hand wrist brace

maybe-health

I2cypone

<h2>Vertical bracket for rack-mounted server (1U size only)</h2>This is a simple bracket for rack-mounted server for those personal server owner who does not have a server rack. Using this bracket to mount your server vertically against ground.&nbsp;<h3>[Assembly Instructions]</h3><ul><li>step 1: print two brackets</li><li>step 2 (optional): insert two 8mm diameter optical axes (30cm) parallel into the reserved holes on the bracket</li><li>step 3: place your bracket on the ground</li><li>step 4: mount your server</li></ul>&nbsp;&nbsp;

Vertical bracket stand for Rack-mounted Server (1U)

maybe-IT

seojeff

Woman Posing Yoga - NSFW

maybe toy

pt.robot

This adapter allows you to use SUNLU filament spools on the Bambu Lab A1 mini's AMS lite color changer. Otherwise these spools don't fit because their inner spool diameter is too large.&nbsp;This is a somewhat unique design that is faster to print than some other common adapters. It relies on a little slot that the SUNLU spools have to lock the adapter in place. There is a corresponding peg on the adapter that fits in that slot. Note the spool hub is slightly tapered, and it's easier to insert the adapter peg-first from the side farthest from the slot. Just align the peg so that it will click into the slot. I included some pictures which should explain it better - it's simpler than I'm making it sound. :)&nbsp;There's always a chance SUNLU will change their spool design, but I have also included the original Fusion 360 file in case you need to make modifications.&nbsp;I hope you find this useful!

Adapter for SUNLU spools to fit A1 mini AMS lite

maybe-3dprinter

BENOengineering

Protect your beer with this can cover against wasps, bugs and other co-drinking persons :)The bottom snaps onto the top of a 0,5L - 0,33L (short) - 0,33L (long) can. If you want it to work with a 0,25L can, scale both parts to 0.96.Easiest way to assemble is by gently squeezing together the circle of the bottom part and slide the top into the hinge-part.&nbsp;Check out the alphabet-version as well:<a target="_blank" href="https://makerworld.com/en/models/458456" rel="nofollow noopener">https://makerworld.com/en/models/458456</a>&nbsp;Commercial license you can get here:https://buymeacoffee.com/benoengineering/e/265720

Beer protector

maybe-kitchen

SigmaT4

Hi,&nbsp;This model consist in two tools designed to help drilling holes at the right place when installing a concealed print in place hinge.(model here : <a target="_blank" href="https://makerworld.com/en/models/195411#profileId-215987)" rel="nofollow noopener">https://makerworld.com/en/models/195411#profileId-215987)</a>&nbsp;The first tool is a basic L shaped print with 2 holes where you should drill.This tool must be used on the furniture side (the fixed part).&nbsp;The second tool is more complex.You can screw a M4 screw in the hole to tune the friction of the caliper.It then has two functions:<ul><li>Measure/Visualise the overlap you want</li><li>Report it on the door</li></ul>(You will undestand how it works by looking at the photos)

Tools for concealed hinge

maybe-tools

Doc Taylor

The same as Ebachalo's but as one piece vs two.Original: <a target="_blank" href="https://www.printables.com/model/52753-logitech-m570-trackball-wedge-stand-45deg" rel="nofollow noopener">https://www.printables.com/model/52753-logitech-m570-trackball-wedge-stand-45deg</a>Print settings: Prusa Slicer,  Supports: auto gen supports, overhang 45, style organic, top contact Z 0.1.Layer perm: layer height 0.16, first layer 0.2, vertical shell perm 3, Horizontal shells solid layer top 3,  bottom 3

Fused Logitech M570 Trackball Wedge 45 Degrees

maybe-office

3DPmom

Here is a family of stretchy ghosts that are more fun than spooky 👻 In my print profile I have arranged them as follows:&nbsp;Plate #1: Small, Middle, and Large Ghosts, (2 colors, white & black)Plate #2: Large Ghost (2 colors, white & black)Plate #3: Middle Ghost (2 colors, white & black)Plate #4: Small Ghost (2 colors, white & black)&nbsp;I placed all three ghosts on plate #1 to economize the amount of waste purged (it's more efficient to print 3 ghosts at once than one at a time). There will be more filament purging with this print as the color changes from black to white. I have tried playing around with the flushing settings but found if I didn't purge the black enough it caused my white to look more gray around the eyes:( If you would like to print one at a time, I placed them separately on plates #2, #3 and #4.&nbsp;Note: When you go to preview these slinky's in Bambu Studio you will get a warning that states: “Warning: It seems object POG Small (or Large) Slinky has floating cantilever. Please re-orient the object or enable support generation.” You can ignore this warning. The program is recognizing the space between each layer of the slinky. That ‘space’ is intentional and necessary to be able to separate the slinky when it is done printing. It will print fine without supports:)&nbsp;3D PRINTING SETTINGSLayer Height 0.2mmPLA works greatNo Supports needed.15% InfillDimensions of Large Ghost: 3 in. x 2.5 in.Dimensions of Middle Ghost: 2.5 in. x 1.5 in.Dimensions of Small Ghost: 1.5 in.x 1.25in.&nbsp;After you print each ghost, the layers that will be lightly connected together. Gently separate them with your fingers or a non-sharp object like a butter knife:)&nbsp;Have Fun Printing:)

Slinky Ghosts (3 sizes)

maybe-goods

E.T.

<h2>Airless Ping Pong Ball 2.0!</h2>Now with more bounce, stronger, thicker, more fun! Prints without supports for easier post processing For best results, print in PETG, or a tough PLA! ABS also holds up well. Regular PLA tends to crack easily. Brim is necessary. If you are having adhesion issues, clean build plate with alcohol and increase brim to 10mm.

Airless Ping Pong Ball 2.0

maybe-toy

ThatGuy123568

Just a funny 3d printing joke, no supports, printed on ender 3 pro

Everyone Is A 3d Printer Bathroom Sign

RHSJR0727

Because Why Not? Let me introduce you to “The Toilet” Bathroom Organizer. Has a functioning bowl Lid that you use a piece of filament as the hinge and a removable tank lid with an optional solid cover so you can hide your valuables in the back.&nbsp;UPDATE: 3/22/24     I added a Mini Specific profile with the correct size hinge holes for filament. Happy Printing!