心思单纯的小梦魇

星骸造物-StarK

精度组装测试-Assembly test

模型

Cute calico / tri-color cat keychain.40x50mm, 3.2mm thick.Can be printed without an AMS.&nbsp;Other cat keychains available <a target="_blank" href="https://makerworld.com/en/@aztairya/collections/1147524" rel="nofollow noopener">here</a>Bookmark versions available <a target="_blank" href="https://makerworld.com/en/@aztairya/collections/1172644" rel="nofollow noopener">here</a>&nbsp;No AMS printing instructions:Start with WhiteOrange at layer #11 (2.2mm)Dark gray at layer #13 (2.6mm)Black at layer #15 (3.0mm)

Cute Calico Cat Keychain

挂件

秋瑟意浓

此挂钩托盘只适用于宜家洞洞板

宜家洞洞板挂钩托盘

洞洞板

AerodynamicSpud

A fun cat toy I made when I got bored, it is a ball inside of a bigger ball to ensure maximum cat interest.(Cat not included)<ul><li>Normal supports on the bottom to help with the base</li><li>Break off ball once printed</li></ul>

Ball in Ball Cat Toy

teddi.stanescu

<div><h1>Summary</h1><div>This is a relatively small game case holder I designed in fusion 360 wanting to organize some of my more important games.I know it will definitely take longer to print than other ones you can find here, but i really wanted to give it a more special and rugged look, instead of a normal box with slits in it to hold the cases straight.Everything is at least at a 45 degree angle so no supports are needed for the logo, although decent cooling and printing speeds may be required.I designed it this way so if you want, you can add enamel paint to the inlay of the logo so it looks super professional and nice once you're done with it.I've included a step file for those who want to modify it, add their on logos, improve upon my very non efficient design, haha. </div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>Doesn't Matter</div> <pre><code> Supports: <div>Doesn't Matter</div></code></pre> Resolution: <div>0.2</div> <pre><code> Infill: <div>15</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Fiberlogy+PLA" target="_blank" rel="nofollow noopener"> Fiberlogy PLA </a></div>

PlayStation / XBOX game case holder - customizable step file included

Swiger3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Dark Gray At layer #15 (1.28mm) swap to Light Gray At layer #17 (1.44mm) swap to White for the rest.

Goku and Pikachu - Hueforge 4 color filament painting

玩具

Black Glovz

Halloween Lego Head Pack&nbsp;Instructions:1 x Head 1 1 x Head 2 1 x Head 3 3 x Cap&nbsp;Please use led candle light and not a normal one as you will burn down your house.

HALLOWEEN PUMPKIN LEGO HEAD PACK LED CANDLE LIGHT LAMP

Good Day Designs

Hey everyone!I just started getting into electronics and design after a bit of 3D printing. This is my first official project with proper documentation, measurements, and testing around a Raspberry Pi. The design is purposeful where the SSDs stick out and with cables going around, wrapped in a cable sleeve for an interesting look. The OLED helps to monitor the device and to check ip.Updates:<ul><li>9/22/2023: Initial release</li></ul>Parts used:<ul><li>1x Raspberry Pi 4B 2gb</li><li>1x OLED 0.96 i2c display module</li><li>Required cables (ethernet, power cable, etc.)</li><li>1x 60mm 5v USB fan</li><li>2x USB to SATA cable</li><li>2x SSD 2.5"</li><li>2x M3 14mm-16mm screw</li><li>23x M3 6mm screw</li><li>25x M3 4mm screw</li><li>2x M3 nut</li></ul><a target="_blank" href="https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1" rel="nofollow noopener">https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_4?crid=XHDE9KMMJRLB&keywords=sata%2Bto%2Busb%2Bconnector&qid=1695431511&s=industrial&sprefix=sata%2Bto%2Busb%2Bconenctor%2Cindustrial%2C86&sr=1-4&th=1</a>All up to you but this is how I printed mine:<ul><li>Printer: Bambu Lab P1P & Elegoo Neptune 3 Plus - for the inner panels</li><li>Some adjustments have to be made in terms of the base</li><li>Walls: 4</li><li>Top/bottom: 4</li><li>Nozzle: 4mm</li><li>Layer height: 0.16mm</li><li>Infill: 15-20% - any pattern</li><li>Supports: ON for outer panels - tree</li><li>Brim: ON for outer panels</li></ul>Here are some assemblies to help install and notes:<ul><li>SSD side bracket is to be mounted inside, keeping the 2 SSDs in place</li><li>60mm USB fan apparently can't be controlled so I'd recommend an adapter with a physical knob attached</li><li>There are 3 versions of Front Panel Outer for OLED, no OLED, and additional airflow.</li><li>SSD top panel bracket only needs 2 screws for SSD on the top as it's stable enough</li></ul><figure class="image image_resized" style="width:52.04%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_f2d7f21300bcb.png"></figure><figure class="image image_resized" style="width:52.41%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_d87cad8bcc57c.png"></figure><figure class="image image_resized" style="width:52.2%;"><img src="https://makerworld.bblmw.com/makerworld/user/335487091/draft/2023-09-23_3c89542c443da.png"></figure>Please leave any comments/feedback as they would be greatly appreciated!

Raspberry Pi NAS Enclosure - Dual SSD 2.5"

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Polymaker v2 print profiles are the original print profiles updated with new models. They're redesigned based on user feedback and also use 30-40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of a POLYMAKER 1kg cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Notes:<ul><li>I've tested with several POLYMAKER PolyTerra spools and the diameters tend to vary slightly.</li><li>The Polymaker.A model fits most of my POLYMAKER spool rims. Polymaker.B has a slightly smaller inner diameter. I use both of these models on my spools.</li><li>It is possible to have Polymaker.A fit on one side of a spool and Polymaker.B fit on the other side.</li><li>The size of the holes on the spool is NOT an indicator of spool diameter from my experience.</li><li>Tested on PolyTerra spools but also may be compatible with PolyLite, PolyMax, and PolyWood.</li><li>Shown as printed with Bambu Lab PLA Basic at 0.2mm</li></ul>Features:<ul><li>Reusable</li><li>POLYMAKER nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print Polymaker.A and test BOTH SIDES of the POLYMAKER spool to see if it fits snug. If the ring is too loose for either side then print Polymaker.B and test again.</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

POLYMAKER PolyTerra Bambu Lab AMS Cardboard Spool Adapter Ring

实用

GamerForge

Hello Guys! I created a Paint sorting box, suitable for Ikea Alex. - 30 colors fit into it - no suppoert needed - Compatible with my other Ikea Alex sorting boxes

模型

挂件

洞洞板

猫

PS

玩具

灯

nas

实用

收纳