user_280769091

pax_LAB

<h3>Introducing our Tightness Reference Board</h3>Precision in your hands. Explore 12 sizes (-0.01 to 0.1) to fine-tune your designs. Print, test, and perfect your fit.&nbsp;The main tester cylinder is 10mm.(D)

Tightness Reference Board - Level up the precision

aninno

螺丝、螺母、五金、电子元件盒子组合 留有纽扣磁铁位 有条件的话可以粘贴磁铁上去

螺丝螺母工具盒组合screw nut toolbox

WorkShop

Bill Fellner

There are several different versions. <ul><li>3 or 5 Pegs</li><li>With or without front lip</li><li>With or without print supports needed</li></ul>You can even install these upside down so the on the underside.

Honeycomb Screwdriver Holder / Shelf Remix for HSW - Multiple Version

RobDrivesCars

It's just a tray™ … or is it?Well, it is, but it's a small tray for small parts. Specifically, I designed these for screws when I'm working on fulfilling orders that require I sort specific length screws and count the quantity, but this could be useful for anyone doing any sort of small electronic disassembly!This is StackBox v2. It has several big upgrades over v1:<ul><li>No supports needed, ever.<ul><li>The bottom of the tray has flared. This allows for the ez-stack system do its job using simple bridging</li></ul></li><li>The spout has been redesigned<ul><li>It's now on an angle, meaning screws are less likely to spill out</li><li>The </li></ul></li></ul><figure class="image image_resized" style="width:63.34%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_5lqjwej5c6id.gif"></figure>The base of the tray has a divided interior which allows you to sort two or more different types of items (like two sizes of screws) on either side. I also added ridges to catch small features like the lip of the screw head so it makes for easy sorting/counting.<figure class="image image_resized" style="width:39.77%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_xrseczvlcuch.jpg"></figure>I also added a small funnel at the corner of the tray. This “spout” will just fit into a 2x3-inch (50x75mm-ish) bag in case you need to store those sorted items for whatever reason. There is a small lip right before the spout to prevent loose screws from just falling out of the spout.<figure class="image image_resized" style="width:39.3%;"><img src="https://makerworld.bblmw.com/makerworld/user/171771437/draft/2023-09-19_da87h1awsd5l.jpg"></figure>On, and did I mention they can stack? Because they can. It's kind of the whole point and it makes storing multiple kinds of screws or small parts for a single project super simple.There's also a small friction-fit lid in case you want to keep those parts free from the eyes of wandering cats.This print has been simplified to just three files:<ol><li>Small Tray: 10mm high walls</li><li>Medium Tray: 25mm high walls</li><li>Lid: It's a lid, kind of! There is no securing other than friction-fit (which depends on your printer tolerances). This is more to prevent bumps and spills.</li></ol>----The original v1 of this model (which is retired and will no longer be updated) <a href="https://www.printables.com/model/493058/" rel="nofollow">can be found here</a>.

Stackbox - The Stackable Small Parts Sorting Tray (v2)

Gifts

PartyLime

GEN 12: please see my profile for the GEN 12 ball. There&#39;s a limit of 500mb on one page so I had to make another for the latest Gen. It bounces really well and feels super durable in TPC I wasn&#39;t satisfied with the current models of the airless basketball on here as they only had a single lattice. This took me days make sure the double lattice worked in CAD - SolidWorks was not built for this! As I don&#39;t have $2,500 to spare, I worked from the images available online.I printed it in TPU. It doesn&#39;t bounce as much as a standard basketball in TPU so I suggest a stiffer material.&nbsp;GEN 9: I have added a gen 9 version. It is a little closer to the original and should weigh about the right amount when printed in TPU/PLA&nbsp;GEN 10: I have adjusted the size of the hex holes and increased the filled on them. I&#39;ve also increased the lattice thickness to 8mm to hopefully increase bounce. The logo on the top and the airless gen 10 tag have also increased in size a little to improve how they look. Lastly, the holes around the seam are now pentagons as in the original ball&nbsp;GEN 11: I have added a new version with cut-outs throughout the seams. This will hopefully make the bounce more consistent.&nbsp;The original version I uploaded was removed due to “abnormal download data”. MakerWorld support took all my points but said I could re-upload so here it is again. Hopefully that won&#39;t happen again. MATERIALS:Extrudr Hard TPU (58D) - good durability about 40% bounceOverture Super PLA+ - 100% bounce but broke easilyOverture easy nylon (PA6) - broke almost instantly (the community have suggested “annealing” the print in water to increase durability)BASF Forward AM Ultrafuse TPU 64D - good durability and 60% bounce (BEST SO FAR)BASF Ultrafuse TPC 45D - good durability and great bounce. I recommend annealing this one at 110°C for 10 hours at least.

Airless basketball

Boys

Cerkas

I tested with a PowerA model should workBtw is my first design so give me your feedback :)

Underdesk Switch ProController Holder (PowerA)

Office

euosJad

🍎Introducing the ultimate Apple AirTag mount model designed for those who demand durability and functionality! Engineered to be nearly indestructible, this mount provides unparalleled protection for your AirTag without compromising its functionality.&nbsp;🔧Crafted with precision, our mount ensures your AirTag fits perfectly, allowing for seamless tracking without any interference.&nbsp;🔒Mounting your AirTag has never been easier! With just two screws, you can securely attach this mount to any surface.&nbsp;🛡️Experience the perfect blend of strength and versatility with our AirTag mount model. Download now and elevate your tracking game with confidence!

Apple AirTag Mount

chevy

3D prints and gifts

All pieces are orientated as the should be printed and all snap together.

X1

WorkShop

HSW

Gifts

Boys

Office

chevy

Home