渡沧溟v1

Sike Prints

Custom Dactyl Manuform 5x7, made with Raspberry Pi Pico.

Custom Dactyl Manuform 5x7

键鼠

ming_noi

X adapter camera for drone pavo best print on TPU

X adapter camera for drone pavo

Canran

<ul><li>Assembled Chinese traditional style palace lantern model, suitable for Bamboo Lab Lamp Kit 001.</li><li>The four sides of the lamp can be customized, the default provides four sides of plum, orchid, bamboo and chrysanthemum.</li><li>The example is printed using transparent material.</li></ul>&nbsp;<ul><li>组装的中国传统风格宫灯模型，适配拓竹Lamp Kit。</li><li>四面灯面图案可自定义，默认提供有 梅 兰 竹 菊 四面灯面。</li><li>示例图中使用透明材料打印。</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128652/design/2024-01-17_9f5b33d6e30cf.gif">2024/1/17 Update V2 Model由于原始模型悬垂结构过多，支撑不好拆，优化了一个V2版本，省了很多材料，更好组装了。用深红色材料测试了一下效果很好。Since the original model has too many overhanging structures and the supports are hard to disassemble, a V2 version has been published to save a lot of material and better assembled.Tested it with a dark red material and it works well.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000128652/design/2024-01-17_14d8ca9042ee3.jpg">&nbsp;&nbsp;&nbsp;&nbsp;

Traditional Chinese Palace Lantern Lamp 国风宫灯床头灯

摆件

橡皮鸡蛋  EEGG

Oreo ratchet decompression toy, no glue or screws needed, fully 3D printed parts, after assembly it can make a &#34;click click click&#34; sound, very decompressing, using PETG to print the ratchet.&nbsp;Optimized the assembly part, the latch needs to be forcefully assembled.<img src="https://makerworld.bblmw.com/makerworld/draft/850900/2024-04-13_3e38c122d410d.png">&nbsp;If the size difference is too large, it can be trimmed with scissors before assembly. Thank you for your support, please follow us, and there will be more fun gadgets to come. 如果尺寸差距过大，可以用剪刀修剪后再装配。感谢大家的支持，请关注我们，后续还有更多有趣的小玩具。&nbsp;&nbsp;

Oreo ratchet decompression toy  fidget

小玩具

Heiko_Hoffmann2000

Für den Elegoo Neptune 4 / Plus / MaxWerkzeug Halterung, die an der Halterung der Filament Rolle befestigt wird.Hier können die Imbus Schlüssel, USB Stick, Zange, Spachtel und Kleinteile verstaut werden.Schnell und sehr praktisch, so hat man immer das passende Werkzeug an Ort und Stelle.Bitte bewertet auch mein Druckprofile / Modelle... ♥ Danke ==============================================================================For the Elegoo Neptune 4 / Plus / MaxTool holder that is attached to the holder of the filament roll.Imbus keys, USB sticks, pliers, spatulas and small parts can be stored here.Fast and very practical, so you always have the right tool where you need it.Please also rate my print profiles / models... ♥ Thank you

Elegoo Neptune 4/Plus/Max Tool holder Filament

海王星3pro

maxaruta

<h3>Model</h3>This photobox features a 360-degree rotating base, which allows you to take photos from any angle. It is also fully customizable, thanks to the variety of wall styles available. (see my profile for other version! With my photobox, you can significantly improve the perceived quality of your products to your customers. Your photos will be more professional and engaging, and your customers will be more likely to purchase them. Download the model today and start taking professional photos of your creations! _____________________________ Ti presento la mia nuova photobox, lo strumento perfetto per creare fotografie professionali delle tue stampe e creazioni.&nbsp;Questa photobox è dotata di una base d'appoggio ruotabile a 360 gradi, che ti permette di scattare foto da qualsiasi angolazione.Inoltre, è personalizzabile al massimo, grazie ai vari stili di pareti disponibili sul mio profilo.&nbsp;Con la mia photobox, potrai migliorare notevolmente la qualità percepita dai tuoi clienti dei tuoi prodotti. Le tue foto saranno più professionali e accattivanti, e i tuoi clienti saranno più propensi ad acquistarli.&nbsp;Scarica il modello subito e inizia a scattare foto professionali delle tue creazioni!

Photobox: Take professional photos of your creations (V3!)

摄影

Sketchy

<h2>The desk bin (trash bag compatible)</h2>This is a bin for your desk, easy to clamp onto almost any desk! You just slide it onto the side of your desk, and screw in the screw! Then you attach your trash bag, and it&#39;ll be easy as cake, to clean your desk!&nbsp;The trash bag is tightened around the desk-bin, as you can se on the picture below. This makes cleaning your desk incredibly easy and effective! <img src="https://makerworld.bblmw.com/makerworld/draft/838766/2024-04-10_b16f9e8036d1d.jpg">&nbsp;<h3>Print settings</h3>No support on threads and screws!Enforce support on the overhangs on the desk-bin.15% infill, i recommend cubic.&nbsp;&nbsp;

Desk bin - trash bag compatible

居家

fznhappy

EVA TISSUE BOX, Can be printed single color or multi-color, easily to assemble it.Better to print with BAMBU PVC support material, or you can utilize good tool to peel off support. &nbsp;

EVA tissue box

DonL

装垃圾袋装的难受，做了一个支架用于收纳拼装模型板件，打印盘4的为最终版本，打印盘1的比较稳重&nbsp;建议使用0.4mm喷头以及0.2mm层高打印

拼装模型板件支架-plastic model parts stand

高达

geeklabs

A bad#ss headphone stand if you like Kratos!

God of War Kratos head, headphone stand

工艺品

唯美无殇

This "Genshin Impact" figurine is absolutely adorable! It's made with a one-piece printing technology, eliminating the need for assembly with separate parts. The entire model is seamlessly integrated, and the details are meticulously crafted. Whether it's for collection or as a decorative piece on your desk, it's sure to bring a sense of joy and contentment.

Raiden Shogun

原神

基于崩坏：星穹铁道游戏道具崇高道德的赞许的二次创作单色打印组装拼接个别零件拼接会有误差，建议打磨或使用白乳胶作为粘合剂Based on the game ‘Honkai Star Rail,’ this is a secondary creation that admirably endorses the sublime morality of the game props.Single-color printingAssembly requiredThere may be errors in the assembly of individual parts; it is recommended to polish or use white latex glue as an adhesive.

星穹铁道游戏道具：崇高道德的赞许 Honkai: Star Rail ：Praise of High Morals

星穹铁道

Regarnogal

simple sanding stick to rework printed parts much easier.added Bambu Logo to better fit the Maker World :D&nbsp;Need a sanding paper of1,5 cm width14 cm length<img src="https://makerworld.bblmw.com/makerworld/draft/494064/2024-02-04_ee343ecc90525.jpg">&nbsp;&nbsp;Also have a look on the bigger Version with 2,5 cm:<a target="_blank" href="https://makerworld.com/en/models/171216#profileId-187972" rel="nofollow noopener">Sanding Stick Bambu Style V2 (Big version) by Regarnogal - MakerWorld</a><img src="https://makerworld.bblmw.com/makerworld/draft/494064/2024-02-04_88f299a34118c.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/494064/2024-02-04_e96db8f2379a7.png">&nbsp;Details for this Version:tick_width_in_millimeter = 15 base_height_in_millimeter = 12 base_length_in_millimeter = 50 end_1_option = wedge end_1_height = base_height end_1_wedge_angle = 23 end_1_wedge_round_tip_diameter_in_millimeter = 2.0 end_2_option = round end_2_height = base_height end_2_wedge_angle = 10 end_2_wedge_round_tip_diameter_in_millimeter = 3.0 screw_thread_dia_in_millimeter = 6.0 screw_head_dia_in_millimeter = 12.0 screw_thread_hole_dia_in_millimeter = 6.4 screw_hole_dia_in_millimeter = 6.6 screw_head_space_in_millimeter = 15.0 screw_head_teeth = 8 extra_screw_head_height_in_millimeter = 0.0 max_thread_height_in_millimeter = 3.5

Sanding Stick Bambu Style

工具

DUGUI

天瑞料盘改的收纳盒，将原作者的壁厚改薄，节省材料，增加卡扣高度，卡的更牢固。The storage box of Tianrui material tray has been modified by thinning the original author&#39;s wall thickness, saving materials, increasing the height of the buckle, and making the card more secure.

天瑞Tinmorry Filament Spool Drawer料盘盒  4格

收纳

RobotPanda

A left Side Door Seal/Gasket to hide the gap in between the glass and side of the body of the printer. Also to help keep heat in that would otherwise escape from the printer through the gap.&nbsp;Print in TPU

P1S/X1C Left Side Door Seal/Gasket

Jerryie

&nbsp;&nbsp;This set includes screws, nuts and washers of all kindsISO 4017 DIN 933&nbsp;With smaller screws and nuts, it is necessary to set the height as low as possible so that the screw works correctly for example at M3, M4 and M5&nbsp;&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/194263/2023-11-22_69ea780efc7e4.png"></figure>&nbsp;<figure class="image image_resized" style="width:25.39%;"><img src="https://makerworld.bblmw.com/makerworld/draft/194263/2023-11-22_379d07fbbf734.png"></figure>&nbsp;&nbsp;The screws are optimized for easy twisting, but if there is a problem with any type, write it in the comments and I will fix it I tested it from PLA and they worked fine&nbsp;NO SUPPORT!&nbsp;&nbsp; There is a bonus in files for people who often lose their extension :)

Screw Set M3 M4 M5 M6 M7 M8 M10, ISO 4017

标准件

asdfghjklö

Ironing test for ironing speeds from 15 to 45mm/s (plate 1) or 50 to 80mm/s (plate 2) and ironing flow from 10 to 50%.&nbsp;This is a larger version for larger surfaces. If you are searching for a quicker print and/or want to know the best settings for smaller surfaces,<a target="_blank" href="https://makerworld.com/en/models/30075" rel="nofollow noopener"> my other model </a>is probably better for you.&nbsp;Rotated 90 degrees to get the slicer to begin the ironing with the smaller flow areas, to avoid problems with filaments that tend to blob (as much as possible).<h3>Instructions</h3><ul><li>on bambu mobile: select your printer, plate and filament(profile) and just hit print</li><li>on bambu studio: same as above, but if you need to switch your printer, make sure you enable “Advance” in the “Process” Menu before switching printer, or some ironing settings might get lost (depending on your bambu studio version). Thanks to <a href="/en/@GianfLab" rel="nofollow">@GianfLab</a> for letting me know!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/782233/2024-03-21_12f81c5536987.png"></figure><h3>Notes:</h3><ul><li>Dial in your filament first (flow, pressure advance) or this print won&#39;t make a lot of sense</li><li>If you don&#39;t know  which plate to start with: start with the first one (15-45 mm/s) and only try the second if you have usable results on the 45mm/s strip or no usable results at all</li><li>If you want to save time, it might make sense to try the <a target="_blank" href="https://makerworld.com/en/models/30075" rel="nofollow noopener">smaller model</a> first and in this model here, delete strips with ironing-speeds that gave you bad results  before (dont print them)</li><li>Results will be different for different filament types (materials) and often also different filaments, sometimes even for the same brand&amp;product but different color (same as with most filament settings/calibrations, especially for white and transparent VS other colors)</li><li>For filaments that tend to blob (e.g. PETG) it might make sense to check for blobbing frequently and/or only print 1 stripe at a time. Having “half-liquid” filament around your nozzle while ironing will affect the ironing result.</li></ul>

Ironing calibration: larger, speed & flow

测试

TreeNB(亨利方)

This is new revision of airtight dry box of MMS with material Rewind function.See below video, the material can be rolled back by pulling the rack.这是一个全新版本的具有材料回卷功能的“MMS手动材料管理系统”，使用标准的4L 密封盒。如下视频，材料可以被通过拉动拉杆回卷入料盒。<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1Ka4y1C77q/?share_source=copy_web&vd_source=686042c1d0a498840db169aa416a0328"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1Ka4y1C77q&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1Ka4y1C77q&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>And the design of “clutch” makes the filament send out smoothly. See below link video guide you assemble the single unit.并且离合器的设计使其在打印中不影响出料顺滑。参考如下视频顺序安装组件，完成单个单元的组装。<figure class="media"><div data-oembed-url="https://www.bilibili.com/video/BV1VC4y1k7Yn/?share_source=copy_web&vd_source=686042c1d0a498840db169aa416a0328"><div class="ck-media__wrapper" data-oembed-url="https://player.bilibili.com/player.html?bvid=BV1VC4y1k7Yn&autoplay=0&poster=1"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://player.bilibili.com/player.html?bvid=BV1VC4y1k7Yn&autoplay=0&poster=1" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>addition components除了打印件之外的其他零件。1.φ4*4mm magnet------3PCS. place three magnets in below three holes. and make sure these two part attract each other by the magnet.直径4mm*4mm高的强磁------3颗。 如下图方式安装3颗强磁。并且确保两个组件可以如图方式相互吸引。<img src="https://makerworld.bblmw.com/makerworld/draft/567033/2024-01-27_11482ac86ce39.jpg">2. 2.2mm*6mm self tapping screw-------1PC.2.2mm*6mm 自贡螺钉---1颗。(可以使用接近的规格代替)<img src="https://makerworld.bblmw.com/makerworld/draft/567033/2024-01-25_69b5d14380b41.jpg">3. silicon rubber tube inner dia.14 outer dia. 18.Put on the tube like below picture shown.see below link, for your referance. I bought the tube from here.硅胶软管，尺寸如下。内径14mm，外径18mm。如图方式套入滚轴。如下链接卖家供参考。为本人采购软管的淘宝店家。&nbsp;<a target="_blank" href="https://detail.tmall.com/item.htm?_u=l5bq5mo0745&id=651153185823&spm=a1z09.2.0.0.57b92e8daL0lah" rel="nofollow noopener">硅胶管软管硅橡胶管无味家用水管饮水机家用耐高温弹性透明软管-tmall.com天猫</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/567033/2024-01-27_6a99424248073.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/567033/2024-01-27_cd0ee4fa39e04.jpg">4.604 bearings-------4PCS604 滚珠轴承-------4颗<img src="https://makerworld.bblmw.com/makerworld/draft/567033/2024-01-25_a61d52a9824c7.jpg">The link of air tight box. and the size is about 220.7*95.5 with R22.7 Fillet. if you can not found this size of box in your conntry, tell what you found, i will check if i can modify it to fit to your size or not.如下是4L密封盒的购买链接，开口处的尺寸是220.7*95.5，4个圆角是R22.7. 如果你找不到合适尺寸的密封盒，告诉我你能找到什么规格的，我来看看是否有机会修改一下设计。<a target="_blank" href="https://item.taobao.com/item.htm?_u=c5bq5moaee6&id=639130539569&spm=a1z09.2.0.0.21572e8dN68Uq0" rel="nofollow noopener">https://item.taobao.com/item.htm?_u=c5bq5moaee6&id=639130539569&spm=a1z09.2.0.0.21572e8dN68Uq0</a><img src="https://makerworld.bblmw.com/makerworld/draft/567033/2024-01-31_e73f248c603bf.png">

MMS Material Rewind 材料可回卷(humidity protection, 4L Airtight box as the cover)

送收料

maCyo42

Addons (There are about 30 remixes that add new functions to the Riser. Here are some listed, including third-party ones.)<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/491938" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-07-02_e402a17ddf8fb.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/53455" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-07-02_9ab872861d2b3.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/57617" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-07-02_e64872e54b75f.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/28768" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-07-02_22fa1adb0c09f.png"></a></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-07-02_8fe85eb18f6e4.png"></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/423012" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-07-02_e392ebfbb8332.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/154405" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-07-02_9567460abb72f.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/210593" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-07-02_e8e96bbd7f0f7.png"></a></figure></td></tr></tbody></table></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please boost my models only once; there are so many other nice models that also need a boost!</boostcontent></boostme>&nbsp;It&#39;s done!!! All Parts printed and assembled! I started the Riser V2 early December and changed the last Parts yesterday. There&#39;s a lot of work in this design, so many small and big changes. Today i will start to Release the first completed picture of the Riser V2 and the Profiles of the Mainbodies. As you later can see i&#39;ve seperated some Parts so that you can play around with Step Files for your own Design Fronts.&nbsp;<h2>Should I print the Riser V1 or V2? Here are the differences.</h2><ol><li>There are 2 Versions of the V1. The Standard is for 8mm Lightstrips and the 12mm Edition for 12mm Lightstrip and additionaly you can fix the Lightstrip with Cable ties. V2 combines the Features of both V1 Riser in this Case. I received a lot questions: Will 12mm Lightstrips fit? It can but that is not sure. It not depends only on the width. The stiffness is one big issue for the curves. Try it i cannot guarantee! There are different lightstrips on the market.</li><li>V2 is tuned more for function than design. There are additionaly Connectors for Accessories like Tools.</li><li>Early December i began to work on V2. My intention was the big change in the Anti Glare Feature and the Connectors. But meanwhile there where some critics on the V1. Some Makers reported a bad fitting of their Top Glas. To much loose in the Spoolholder fitting and so on. So the logical consequence was to rework many things on V2.</li><li>The Modders. I had so many Mails and Msg… can you please add Hexagons insted of Holes and so on. Because of this i reworked the Covers and seperated them for the Modders. You can now easily create your own designs on the most seen Parts of the Riser.</li><li>The printability. Puh i don´t know how to begin exactly. Makerworld makes a lot very easy. But a project like this is not easy. It´s big, it can fail as any other Print… it can fail! But you can do a lot that the chance that it will fail is very small. You have to know your printer, your Filament, your Buildplate… The condition is not the same as i have. But it´s quite easy to begin if you have a predefined Profile. But it´s not a Microwave, it´s a 3D-Printer, a popular and wonderfull Printer. It makes a lot easier and it´s the by far best for consumer on the marked… and nevertheless you have to know what you do. Please keep in mind! I reworked a lot to make it even easier. Less Supports (less filament usage is everytime the best optimization!) Tuned Overhangs especially on the back which is on the Print surface while printing Part 3 and 4. and many more changes</li></ol>happy printing<h2>Features Description</h2><h4>Accessories Port New second Accessories Connector Port. The Port is redesigned an optimized. Accessories fits tighter. The Spoolholder on V1 was a bit to loose.</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-01-16_d57fe6c9f6869.png"></figure><h4>New seperated Drawer Front Cover and Handle</h4>With the new separated Drawer Front you can create easily your own Designs and Text on it and print it upside down for best looking Surface. (STEP File of the Cover included) The new Handle locks both Parts (Drawer and Cover) together. No Glue needed!&nbsp;Compatible Inserts for the Drawer <a target="_blank" href="https://makerworld.com/de/models/44128#profileId-45567" rel="nofollow noopener">Original Inserts &amp; Dividers</a> by <a target="_blank" href="https://makerworld.com/de/u/1818851574" rel="nofollow noopener">tomtom5893</a><a target="_blank" href="https://makerworld.com/de/models/50855#profileId-52695" rel="nofollow noopener">CHT Nozzle Holder</a> by <a target="_blank" href="https://makerworld.com/de/u/2301853465" rel="nofollow noopener">kylecasey4</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-01-16_e7570c3e6befc.png"></figure><h4>New P1S Front Dash Parts with separated Cover for leave Blank or your own Design</h4>In the Standard V2 you have a dummy for the Slot where you can mod different things like a light Switch. The Slot for the MicroSD Card is now protected with a Cover. If you press on the lower Part of the Cover it opens. Yes it´s tricky to get the Card out, but how often you want to get it out… i recommend to use a tweezer or something else. The Covers of Part 5 &amp; 6 is now separated too. You can add your own designs and print it upside down. (STEP Files of the Covers included)<h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-01-16_a2e0b276312d6.png"> Light Strip integration and Anti Glare</h4>The Lightstrip integration is fully redesigned and now combines “V1 Standard” and “V1 12mm Edition” in one sleak Design. You now have a lot of cable tie position to safe your Printer from falling Lightstrip!<ul><li>I strongly recommend COB LED Light Strip with 8mm width. Length 2m and cutable.</li><li>Yes you can also use 10mm or 12mm BUT beware. Most 12mm LED Strip are so stiff that it´s a mess to integrate them.</li></ul>The Anti Glare Feature moved from the Mainbodies to the TPU Gasket Parts because of collisions with the PTFE Tube while printing big Parts. <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-01-17_88977cc660f9.png">Why more Light? Do i need more Light? YES i think so! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-01-17_7662231c60b07.png"><h4>The Toolholder Connector</h4>With this Connector you can add whatever you want to the Riser. In the First step i added the Connector for my <a target="_blank" href="https://makerworld.com/en/models/28768#profileId-25133" rel="nofollow noopener">P1S Tools Model (Get it here on Makerworld)</a>. The Toolholder Connector is provided as a Step File as well. With this the Modding Community is able to connect whatever they want. There are 6 Connector Ports 4 of this. 2 on the Left Side and 2 on the Right Side. There are 2 more Connector Ports on the Back in a different design. (STEP File of the Toolholder Connector included)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-01-18_6005761ec053d.png"></figure>You can also attach a Spoolholder. <a target="_blank" href="https://makerworld.com/en/models/53455#profileId-55205" rel="nofollow noopener">Get my Version with Bearings here</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-01-18_841008088edb2.png"></figure>The “Back Connector” is finally released. Unleash your modding ideas, perhaps for an ESP32 case that can be attached to the back? Use one, two or even all 4 connectors for your modding idea. (STEP File of the Back Connector included)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-02-23_e06df92819799.jpg"></figure><h4>Where to find the &#34;RAW Files&#34; on Makerworld? e.g. Back Connector …</h4>So there are 2 Options. One you can see in the folowing picture as provided by the designer you can find the Parts under “Download STL” else <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-05-07_12c13e3925103.png"></figure><h4>Asssembling Guide</h4><ol><li>Push Part 2 on Part 1 <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-05-07_0b3ee7ecae28a.png"></li><li>Push carefully Part 3 on Part 4 <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-05-07_719957f53c68.png"></li><li>Then push carefully both Parts 3 &amp; 4 together from the Top to the Bottom in Part 1 &amp; 2 <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000133452/design/2024-05-07_1d6c733360ed3.png"></li><li>tba</li></ol>

AMS Riser V2

Swoosh

<h3>4L filament drybox</h3><h3>Background</h3>The idea was to create a drybox with as few modifications to the food container as needed where the spool can be changed with ease.<h3>Idea and Inspiration</h3>This is a collection of things I've found to work well together and adopted them for a nice all-in-one set.The base was inspired by mars gizmos design: <a target="_blank" href="https://www.myminifactory.com/de/object/3d-print-marsgizmo-filament-bunker-131183" rel="nofollow noopener">https://www.myminifactory.com/de/object/3d-print-marsgizmo-filament-bunker-131183</a>The spacer is a remix of this wedge: <a target="_blank" href="https://www.thingiverse.com/thing:4647864" rel="nofollow noopener">https://www.thingiverse.com/thing:4647864</a>The outlet screws used: <a target="_blank" href="https://www.thingiverse.com/thing:4667797" rel="nofollow noopener">https://www.thingiverse.com/thing:4667797</a><h3>Parts to print</h3>What you need:<ul><li>Print the Filament Base first (without supports) - scale the model down to 10%</li><li>Print 2 Roller</li></ul>Print one Silica Lid and check if it snaps to the base Depending on the filament you may need to resize it in small (0,5 - 1,5%) steps Optional but recommended:Print the screws linked above Depending on the filament I would recommend to scale the nut up a bit so the thread goes easy.For bigger spools I'd recommend the original wedge above as it will push the sides better to fit bigger spools. ### Additional parts needed1 Drybox<ul><li>4 608 ZZ Bearings</li><li>1 Compression Fitting (optional) Part list on Amazøn w. affiliate links:</li></ul>Dryboxes: amazon.de/gp/product/B08JTH2NZJ/ref=as_li_tl?ie=UTF8&tag=swooshy-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B08JTH2NZJ&linkId=29819cd04faf9df305e633c6a2204828Bearings: amazon.de/gp/product/B08K936Y1Z/ref=as_li_tl?ie=UTF8&tag=swooshy-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B08K936Y1Z&linkId=5b89cee1cd0a113c97c02624f293fdc1Compression-Fittings: amazon.de/gp/product/B07P3BC4GQ/ref=as_li_tl?ie=UTF8&tag=swooshy-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B07P3BC4GQ&linkId=2daef8abc206fda31e794708d1e09812<h3>Assembly</h3><ul><li>Insert 2 Bearings into each roller</li><li>Mount both roller to the base</li><li>Fill the silica box in the base (approx 40g until full - way more than enough for 4L)</li><li>Add the lid and set the whole base into the container</li><li>Insert the hydrometer into the spacer-wedge</li></ul>Install in front of the box where the grip is Optional:Drill 10mm hole where you want to guide your filament outside<ul><li>Install the printed screw</li><li>Screw in the compression fitting</li><li>You might also hotglue a small (6x3) magnet from the inside of the lid to attach a filament swatch from the outside :)</li></ul><h3>Print Settings</h3>Rafts:No&nbsp;Supports: NoResolution:&nbsp;0.2Filament: 3DJake PETG black&nbsp;Category: 3D Printer Accessories

键鼠

fpv

摆件

小玩具

海王星3pro

摄影

居家

eva

高达

工艺品

原神

星穹铁道

工具

收纳

p1

标准件

测试

送收料

ams

干燥箱