Sharks2006

KG3Dee

Battery dispenser for AA batteries.Push the lever and a battery will be presented.Can hold 26 AA batteries.<ul><li>Adjustable width for smooth, problem-free loading of batteries. The width is critical to prevent fly-out or jams while loading batteries</li><li>Accepts all standard size AA batteries. (≤Ø14.5mm)</li></ul>Please use designer print profiles as these are the only ones that are always up to date.&nbsp;Also, check out this in an <a target="_blank" href="https://makerworld.com/en/models/396440#profileId-297756" rel="nofollow noopener">AAA version</a> and the <a target="_blank" href="https://makerworld.com/en/models/198851#profileId-219450" rel="nofollow noopener">AAA Mechanical Battery Dispenser Slide</a>.&nbsp;Printed model consists of 2 print profiles, “V3 Main Parts” (0.2mm) and “V3 Leveling Parts” (0.15mm).3 plates of parts:<ul><li>Main parts. 0.2mm layer height:<ul><li>Painted 2 color print(2 filament changes). ~5h5m (For one color print, set both filament slots to the same color)</li></ul></li><li>Guide rail. 0.16 layer height. 1 color. ~1h4m</li><li>Leveling knobs. 0.16 layer height. 1 color. ~44m</li></ul>For the leveling knobs I have had success with 0.15mm tolerance, but I have also added an option for 0.2mm.There is a print plate containing test prints to check which is best for you (left one is 0.15mm), as well as separate plates for all knobs with either tolerance.The knob should snap free with minimal force and should have minimal play in the axial direction.Print sequence is by object, as this has given me best results when printing multiple.&nbsp;Assembly:&nbsp;Tools needed:<ul><li>Flat head screwdriver ~3.5mm.</li></ul>During assembly always check rotational freedom of the lever after each step. If it binds, check if the printed parts are smooth. Cut away any faults in the print.&nbsp;1.<ul><li>Insert the lever in the casing. There is a slotted hole in the casing which needs to line up with the lever pin. Push to insert, and rotate multiple times both ways until the rotation is more or less friction free.</li><li>Repeat steps above for the other side.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_39cb8ba348c5c.png"></figure><figure class="image image_resized" style="width:16.69%;"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-16_696d5b597a4e5.gif"></figure>&nbsp;2.<ul><li>Insert the inner stoppers on both casings, protruding inside the lever groove, and insert the mid plate. The plate will keep the stoppers locked in place.</li><li>Do the same for the front stoppers, and insert the front plate.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_5da3f8c4a6d3c.png"></figure>3.<ul><li>Insert the handle. Check that the handle can move freely up and down.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-11_03b3c1c458c53.png"></figure>4.<ul><li>Insert the springs. They should be inserted as shown in the pictures, with the pin at the lowest point.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_28498c0d0830b.png"></figure><ul><li>Tension the springs and put the pin in the lever.</li><li>Insert the lower stiffener (Top in below picture).</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7320db61e4d09.png"></figure><ul><li>Insert spring guides as shown. The flat one is friction fit into the cut-outs on the mid plate. The spring center one is dove-tailed.</li><li>Check the handle movement after this step, make sure it moves to its end (top) position by itself.</li></ul>5.<ul><li>Check the quality of the threaded bolt.</li><li>Use the printed tool to hold the leveling knob. Rest the bolt against a table and carefully, with no excessive force, turn the screw while holding the tool until it snaps free. Once free there should be minimal play in the axial direction. Do this for all knobs. If the knob is stuck, try the 0.2mm tolerance version.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_411dce1e012b4.png"></figure><ul><li>Trial fit the knob bolts in the guide rail threads. There might be some initial friction here, so enter the threads and turn a few degrees, then back again, then gradually increasing the turn for each go back and forth until the thread is completely set. Be patient here, don't use excessive force.</li></ul>6.<ul><li>Push in the leveling knobs in the casing. There is a slot in the knob and in the casing that should match up.</li><li>Use the printed tool, and twist the knob clock-wise until it sets. No need to overtighten. For the lower one you have to push the handle down to gain access.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-03-17_5afc523ed3444.png"></figure><ul><li>Insert the guiderail on the opposite side of the casing, and screw in the bolts. Do a couple of turns for all, then go back and gradually tighten in multiple goes until all bolts are seated. The guiderail and its position is what keeps the batteries rolling smoothly down when loading the dispenser. Too wide and the batteries will fly out, too narrow and the batteries will jam.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/771614/2024-02-12_7ac74cca77c45.png"></figure>7.<ul><li>Final step is to install the last 2 stiffeners.</li></ul>&nbsp;Width adjustment:<ul><li>To widen the gap, turn the bolt clock-wise.</li><li>To narrow the gap, turn the bolt counter-clock-wise.</li><li>Start by turning all the bolts on full turn counter-clock-wise.</li><li>Grab your battery and insert it in the dispenser and hold it in front of the leveling knob. Adjust the knob so there is minimal play in the battery's axial direction. Continue this for all knobs.</li><li>Once done, release the battery from the top and observe its rolling down the slide. Adjust where necessary and your done.</li></ul>&nbsp;&nbsp;I advice using the original (designer) profiles, as these always have the latest changes incorporated.&nbsp;Would appreciate some feedback if this dispenser works with your batteries, or if you have any issues.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

AA Mechanical Battery Dispenser

tools

SavageLau

<h3>If you want a commercial license, check out my bio and get it from Patreon.</h3>Permission only given for personal use.&nbsp;This model is design for MakerWorld light contest (1/5). Complete free version is only available on here Makerworld. &nbsp;Hey guys, I am here to introduce you the ultimate Light sword. This design is combined with retractable and light elements. All the parts is printed beside the Light source (Cat Light). I will put information of this Cat light so you can buy it via amazon, I don't have any affiliate link or anything, so I will provide information you will need to do you own research and buy the Cat light.&nbsp;When it works with different light & filaments.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_fc6e7544caab1.gif"></figure>&nbsp;This design idea come from Cat light, I was playing with my cats with this cat light that my boss bought a while ago. I relize that this Cat light come with strong while light, violet light, and red light. So I came up a idea to fully utilize these light to make a Light sword. Design was focused on adopt and integrate this CAT light into the system.I want it to hide inside of the sword, but you could still switch the light, to turn it on and off. I also want it to be able to retractable, so it will be fun to play. So, eventually I came up with this design.&nbsp;&nbsp;This Sword takes around 4h20m to print on X1C, takes around 140g of filaments.&nbsp;&nbsp;<h3>Upadate: 1.8.1 (2/1/2021) </h3>Improving tolerancing on light switch mechanism, improving lower external shell & cap tolerancing. Cap piece now might need force fit.  &nbsp;<h2>Switching light: (on/off)</h2>Still have a little bit tolerancing issue, will update later.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_0fba44beb880b.gif"></figure>&nbsp;<h2>Required CAT Light:</h2>If the picture looks like this, it should work. It just rebranding on different store.&nbsp;<figure class="image image_resized" style="width:70.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_aed96d05f56f4.png"></figure><figure class="image image_resized" style="width:57.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_b63310365086e.png"></figure><h2>You may like: </h2>Light Saber Lite: If you don't want to go for this complicate design, you may like this simple one.<a target="_blank" href="https://makerworld.com/en/models/163782#profileId-179797" rel="nofollow noopener">https://makerworld.com/en/models/163782#profileId-179797</a> &nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-30_dd836c79602fc.jpg"></figure><h2>Material Suggestions:</h2>I Highly suggest to use Glow in the dark filament or Translucent filament with some light color.As the CAT light within the sword, it will constant charging the glow in the dark filaments, if you have rainbow glow in the dark filaments, it will get a lot of amazing color.&nbsp;For external parts, DO NOT USE SOME BRITTLE silk filaments, it will break very easily. Some silk filaments will have very poor layer adhesion due to high speed printing cause part failure.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_081a4cd97007d.png"></figure>&nbsp;<h3>Filaments that I use for internal parts:</h3>Glow in green: Inland Grow in the dark ABS. Muti-color one: Gradient Multicolor Grow in the dark PLA.&nbsp;<h2>Post Work:</h2>You will need to remove the brim on the internal parts, it should be very easy to remove. Brim on external parts should be easy to remove and clean too.<figure class="image image_resized" style="width:55.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_80fba4ac102d1.gif"></figure><h2>Installation:</h2>Refer this clip.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_e9bd991544144.gif"></figure><h2>Printing profile:</h2>This design have small contact area on the build plate, make sure you clean your build plate and enable bed leveling before printing. There is no support needed.I put 3 different printing profile up there, please refer pics and pick what you like.&nbsp;<h2>Design:</h2>The retractable mechanism part is very simple.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_7f087d9731033.png"></figure>How to adopt CAT light and keeps it's function(switch lights & on and off) takes a little bit brain power.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_38f187437649b.png"></figure>The tolerancing part torturous and time-consuming. Since I don't know what filaments you are going to use, since filaments sinkage rate have big different from type to type / brand to brand. Since I decided post this design, I want to get it to able to work for most people. So find a balance between different material is very challenging. I have tested PLA, silk PLA, PETG, ABS, so all tolerance should work okay in most cases.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/556982/2024-01-29_e1ba66681e517.png"></figure>Have fun!

Ultimate Light Sword (Retractable) v1.8.1

3DJPDESIGNS

Had this little Hippo Ready to be printed in some awesome Translucent PETG from BambuLab ^^ This Model was also released as a Thank you for 200 Members on my Patreon <3 ! Small tip : If you want to get the Translucent Effect , Make sure to use your own Settings and I highly suggest painting the model with Paint if you want to leave the Translucent effect all the way. I printed these with 0 Infil to keep the Translucent effect as clean as possible. Multicolour file Included DONT KNOW HOW TO PAINT THE EYES ? I have a tutorial on my Discord ( FREE ) <a target="_blank" href="https://discord.gg/JtgAZXcngX" rel="nofollow noopener">https://discord.gg/JtgAZXcngX</a> FOR PERSONAL USE ONLY IF INTERSTED IN SELLING THEM CONSIDERING SUBSCRIBING TO MY PATREONLINK : <a target="_blank" href="https://www.patreon.com/user?u=339505" rel="nofollow noopener">https://www.patreon.com/user?u=339505</a> Being a Patreon will get these files for free every month ^-^Consider following me on Instagram for more updates ! <a target="_blank" href="https://www.instagram.com/3djpdesigns/" rel="nofollow noopener">https://www.instagram.com/3djpdesigns/</a>Created to bring some fantasy into your work place ! Note: This design has been created as ORIGINAL ART

Translucent Baby Hippo ( No Support ) 

cute

Sakul

Revolutionize your workspace with these Brick Stackable Desk Boxes – where playfulness meets productivity! 🧱✨ Unleash your creativity and tidy up your desk simultaneously with these 5:1 Brick brick-inspired organizers. Available in 2x2 and 2x4 sizes, each Box comes complete with a built-in drawer for seamless storage of your office essentials. These bricks are not only five times the size of regular clamping Bricks but are also stackable, just like the iconic building blocks.Mix and match to create your personalized desk masterpiece! Elevate your organizational game and bring a touch of childhood nostalgia to your workspace. The Brick Stackable Desk Boxes – because work can be both efficient and fun!  If you like my work and want to support me in creating more free original designs, I would very much appreciate it if you <a target="_blank" href="https://ko-fi.com/sakul" rel="nofollow noopener">“buy me a coffee”.</a>&nbsp;&nbsp;Check out my newest Uploads <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-06-04_fa3ccc46fa531.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000139300/design/2024-05-01_5c7d04a643a0d.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Brick Stackable Desk Boxes

organization 

Tommy Gun

Nice solid clip i made for the wife, to help store stuff in the pantry ! &nbsp;Ratcher / lockable clamp !! Clamp-It : <a target="_blank" href="https://makerworld.com/en/models/223376#profileId-241391" rel="nofollow noopener">https://makerworld.com/en/models/223376#profileId-241391</a> Crocodile clip : <a target="_blank" href="https://makerworld.com/en/models/242413#profileId-258475" rel="nofollow noopener">https://makerworld.com/en/models/242413#profileId-258475</a>

tools

fun

cute

organization

clips