frank-wolf

uni3Dworld

High density model of Hands vase ideal for suculentsFormat STL and OBJCreated in blenderMaterial PLA2 perimeters15 % infillNo supports

Hands Vase

Haushalt

CorruptWave16

This is a remix of Drill / Screw Bit Holder for Makita Power Tools It wasn't possible for me to fit in my hex bit, so I decided to make another one with a flexible shape (not flexible material). I had 2 lips on the top and the bottom in order to keep it from rotating.This one is for right side. So if you want one for the left side, just mirror it in your slicer program.Thanks for sharing your "makes" ;)

Makita Bit Holder

Werkstatt

mystoopidstuff

This is an Version 2.1 update to the 2nd version (v2.0) Gridfinity Bins with lids. These bins now use a much simpler filament hinge pin. The bins have been updated to include 3U, 6U and 9U heights, and this set includes the following types (see image below):<ul><li>1x4 (6 compartment) lidded bin with tab</li><li>1x2 (3 compartment) lidded bin with tab</li><li>1x1 (one compartment) lidded bin with tab</li></ul>These have the following features:<ul><li>These use normal 1.75mm filament for the hinge pins</li><li>The covers are intended to prevent the migration of tiny parts between the bins, when used in a <a target="_blank" href="https://www.printables.com/model/799599-gridfinity-box-for-stuff-bfs-16-bin-version-21-unt" rel="nofollow noopener">case</a>.  </li><li>Tabs open to 80°</li><li>The bins are available in 3U, 6U and 9U heights.</li><li>The doors on the bins have room for a 9mm wide Brother P-Touch Label.</li><li>3MF set up for single and multicolor printing options.</li></ul><figure class="image image_resized" style="width:54.67%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416342/design/2024-04-06_15ddda2201002.jpg"></figure><h3> Assembly info:</h3>For the hinge pins, recommend using a filament which does not become brittle with exposure to moisture. I use PETG, which does absorb some moisture but seems to do better than PLA. I heard that HIPS is not very hydroscopic, but I don&#39;t have any of that. It may also help to seal the cut ends of the filament with superglue, since filament seems to absorb the most moisture from cut ends. I don&#39;t suspect it&#39;s that big of a deal though, unless using PLA, since that stuff will definitely become too brittle to use as a hinge.  It can help when installing the filament hinge pins to cut the filament end at an angle, which may make it easier to insert them in the lids (thanks to <a target="_blank" href="https://makerworld.com/en/@MagnetDanny" rel="nofollow noopener">MagnetDanny</a> for the suggestion).&nbsp;To assemble the 1x2 (3 compartment) bins:Insert a length of filament though the bin and then thread it through each of the lids, until it is through all three lids. The filament will extend about 2.6mm into the bin. Test that the bin doors swing open and closed freely, and then trim the excess filament.<figure class="image image_resized" style="width:71.43%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416342/design/2024-04-06_rdk5er357c7i.jpg"></figure>&nbsp;To assemble the 1x1 and 1x4 (6 compartment) bins:To install the doors, first remove the integrated support from the pin on the right side of the lid.<figure class="image image_resized" style="width:73.34%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416342/design/2024-04-06_p61fiknzyy1g.jpg"></figure>Then, install the lid by pushing the integrated pin on the lid into the right side hinge pin hole in the base. Then close the lid, and push a length of filament though the hole on the left side. The filament will go into the lid, and will meet some resistance after 9-10mm. It should be possible to push past the initial resistance by hand, but if not, a small pliers may help to feed the filament past the resistance point. Just be sure to grip the filament close to the hole it is going into, to support it. Once the filament hinge pin is fully seated in the lid, open and close the lid several times. If it does not sit flat, remove the filament, close the lid and re-insert the filament with the lid closed. Once it looks good, gently pull the filament (and lid) back a mm or so, and cut the excess filament flush to the bin.<figure class="image image_resized" style="width:73.37%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416342/design/2024-04-06_4c3gs109xqsu.jpg"></figure>&nbsp;<h3>Troubleshooting:</h3>If you find the filament is not going into the lids more than a 9-10 mm, remove the lid, and carefully cut the sides of the spring catch as shown in the pic below. That will cut through the single strand of supporting material that holds the catch in place:<figure class="image image_resized" style="width:76.21%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000416342/design/2024-04-06_v2yh9wug0sxt.jpg"></figure>&nbsp;<h3>Printing:</h3>You can use the included 3MF (BambuStudio) which has all the files set up for printing. There are 2 plates included in the 3MF. One is for single color printing, and the other is for multicolor printing. The 3MF is set up for a Bambu X1C with AMS, however it can easily be modified for other printers.&nbsp;&nbsp;Other stuff:&nbsp;If you need some bins for small parts, the following bins with covers are a good option to use with the Box For Stuff <a target="_blank" href="https://www.printables.com/model/710154-gridfinity-box-for-stuff-bfs-20-bin-version-20" rel="nofollow noopener">20 bin </a>and <a target="_blank" href="https://www.printables.com/model/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste" rel="nofollow noopener">25 bin </a>cases (or other 6U tall cases):<ol><li><a target="_blank" href="https://makerworld.com/en/models/237116#profileId-253187" rel="nofollow noopener">1 compartment 2x1 (3U, 6U, 9U) bin with a magnet pickup tool</a></li><li><a target="_blank" href="https://makerworld.com/en/models/416342" rel="nofollow noopener">1x1, 1x2 (3 Compartment) and 1x4 (6Compartment) bins with lids (6U) - version 2.1</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405008" rel="nofollow noopener">1x2, 1x3, 1x4 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405004" rel="nofollow noopener">2x2, 2x3, 2x4 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/405013" rel="nofollow noopener">3x3, 3x4 (6U, 9U  and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li><li><a target="_blank" href="https://makerworld.com/en/models/443705" rel="nofollow noopener">4x4, 4x5 (6U, 9U and 12U) Lidded Bin for Stuff with Latch Version 2.0</a></li></ol>If you want to check out my other Gridfinity cases, you can find them at the links below:<ol><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/159840#profileId-266789" rel="nofollow noopener">20 bin (6U)</a></li><li>Gridfinity Box For Stuff <a target="_blank" href="https://www.printables.com/model/719788-gridfinity-25-bin-box-for-stuff-version-20-unteste" rel="nofollow noopener">25 bin (6U)</a> (max size for a Bambu X1C/P1S)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/386034#profileId-286398" rel="nofollow noopener">16 bin (6U)</a> (Ender 3 size)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/386041#profileId-286401" rel="nofollow noopener">16 bin - 12U deep version</a> (Ender 3 size)</li><li>Gridfinity Box For Stuff <a target="_blank" href="https://makerworld.com/en/models/389651" rel="nofollow noopener">2 bin (6U)</a> (small test version)</li></ol>If you want to store some small hardware and need some good labeled bins, <a target="_blank" href="https://www.printables.com/@Ch3vr0n_247401" rel="nofollow noopener">Ch3vr0n</a> posted some segmented bins for the Gridfinity system here: <a target="_blank" href="https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b" rel="nofollow noopener">https://www.printables.com/model/732655-gridfinity-boxes-for-gridfinity-box-for-stuff-20-b</a>&nbsp;Thanks to <a target="_blank" href="https://www.printables.com/@Ch3vr0n_247401" rel="nofollow noopener">Ch3vr0n</a> and everyone who provided feeback on the original Version 1 models. That was helpful in designing the version 2, with improvements.&nbsp;If you find these models useful, please post a like or a comment with some pics of your prints.You can find the other things I&#39;m working on at my blog <a target="_blank" href="https://www.mystoopidstuff.com/blog" rel="nofollow noopener">here</a>. You can also follow me <a target="_blank" href="https://makerworld.com/en/@mystoopidstuff" rel="nofollow noopener">here </a>or on Printables to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/mystoopidstuff" rel="nofollow noopener">https://www.buymeacoffee.com/mystoopidstuff</a>&nbsp;Thanks for looking!&nbsp;Update 4/11/2024: I added 3U and 9U versions of the bins to this model.  The 3MF is also updated with all the files.

Gridfinity 1xY Multi Compartment Lidded Bins v2.1

Hobby

laisch

Primary I designed this Hexagon tile set to hide my cables from the TV. So there is plenty of space for cable management behind the tiles. There are four eyelets on each base plate for using zipties.Since the Tiles are featureing magnets to snap onto the base plate, they can easyly be removed or replaced for further upgrades and changes.&nbsp;<h3>Changelog:</h3><blockquote>Update 24.02.2024Added Half and Quater Tiles including Base in various heights  Update 10.03.2024 Add 15mm Tile for an "ESP32-2432S028R" - display (CYD)</blockquote>&nbsp;<h3>Features:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-25_37de1246fe4298.jpg"></figure><h3>Parts and Sizes:</h3><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_lv79h61gd69w.jpg"></figure></td><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_4twwg1nxuqfh.jpg"></figure></td></tr></tbody></table></figure>The general Tile size is 175 x 202mmThe heights can go from 20mm up to 55mm in 5mm increments depending on the choosen base plate and tile size.Parts:<ul><li>Base Plate (10mm / 20mm)</li><li>Base Plate - Half (10mm / 20mm)</li><li>Base Plate - Quater (10mm / 20mm)</li><li>Outside LED (Base + 25mm height)</li><li>Outside LED (Base + 35mm height)</li><li>LED Clock Tile (Base + 25mm height)</li><li>CYD - Display Tile (Base + 15mm height)</li><li>Cable Outlet (Base + 20mm heignt)</li><li>Standard Tiles (Base + 10 / 15 / 20 / 25 / 30 / 35mm height)</li><li>Half Tiles (Base + 10 / 15 / 20 / 25 / 30 / 35mm height)</li><li>Quater Tiles (Base + 10 / 15 / 20 / 25 / 30 / 35mm height)</li><li>Bowties for connecting the Base Plates (tight or loose fit - version, depending on your filament settings)</li></ul>&nbsp;<h3>Preparing the Project</h3>Before you start this project you should make a Sketch how you want the tiles to be orientated on the Wall. The file of the "Base Plates" consists of 7 individual parts where 6 of them can be removed individually for defining how the cables should run and how the base plates are connected to each other.If you miss this step and print the base plate without removing the connection sides, you have no openings for the bow ties to connect each tile to another and alighning them will be much more difficult.Using Bambu Studio for customization:<figure class="table"><table><tbody><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_lslj0l044c4g.jpg"></figure>Right Click on the base plate > split > to parts</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_w6036cdssgaa.jpg"></figure>Switch to the “Object” Tab and remove the unwanted parts</td></tr></tbody></table></figure>The LED Tiles can also be splitted apart for easy coloring.&nbsp;<h3>External Hardware</h3><ul><li>Magnets D: 6mm, H: 3mm (6-12 per tile)</li><li>10mm wide LED Stripe of your choice (I used WS2812b)</li><li>Clock mechanism with 12mm long shaft (only if you want to make the clock tile)</li><li>mounting screws</li></ul>&nbsp;<h3>Used Filament</h3><ul><li>PLA - Black (for Base and Tiles)</li><li>PLA - White (for the diffusor part of the Tiles)</li></ul><h3>Printing</h3>For best looking Result the tiles should be printed on a textured PEI - plate.&nbsp;<h3>Installation</h3><figure class="table"><table><tbody><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_v1legy4d1w1l.jpg"></figure>The hole for the magnet is a tight fit, I used a hammer and a pin to put them into place.  Be aware of the magnet orientation. They should all be in the same orientation so you are able to switch tiles! If your fit is more on the loose side (different filament / settings) then you should add little superglue before pressing them into the hole.On the Cover plates be more careful when using the hammer.</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_3j9vx6gxpi77.jpg"></figure>The bowties can pressfit into place</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_71wh5qrhupmz.jpg"></figure>Screw the Base Plates into the wall</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_9zfawcajua07.jpg"></figure>Install the LED stripes into the LED Tiles</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_q1wwhedkgpo4.jpg"></figure>Install the Tiles and do the cable management</td></tr><tr><td><figure class="image image-style-align-center"><img src="https://makerworld.bblmw.com/makerworld/draft/678254/2024-02-23_s8ejkpb7gn4r.jpg"></figure>Have Fun!</td></tr></tbody></table></figure>&nbsp;&nbsp;

Hexatiles - Hexagon LED Wall tiles

Leuchten 

Gcod3D

Reproduction of F 16-c. This is a multi-role aircraft with a maximum reachable altitude of around 15,000 metres. It has been chosen by the air forces of 25 nations[4]. The F-16 is the largest Western fighter aircraft project, with over 4,500 examples built since production began in 1976[4]. Although it is no longer purchased by the US Air Force, newer versions of it are still produced for the foreign market. In 1993, General Dynamics sold its entire aircraft manufacturing business to Lockheed Corporation[5] which then became Lockheed Martin after its merger with Martin Marietta in 1995.&nbsp;Note: use only this settings. This model needs post production and glue.

F 16-c

Modelle

geo.luki

I modified the form for the possibility of screwing together with an M3 screw. I used TFC Silicone Rubber Type 3 HB Heat Resistant silicone and it works perfectly, PETG no longer leaves any debris on the nozzle. I used 1.89 grams per mold, which is 1.7 milliliters. Mold and holder is printed from PETG with PLA as support material. There is a small stop in the mold and in the wiper holder, which prevents the silicone wiper from sliding out towards the purge chute. EDIT 03.05.2024 New bracket for X1C using the screw from the original cleaner. Use the print file for the X1C, there is a bracket with integrated supports, then remove them. Insert the screw into the hole (as in the photo), then screw the holder into the poop chute with the help of an Allen key and then insert the silicone cleaner. If it&#39;s difficult, use a little oil. You can also look at my other accessories for BambuLab printers. <a target="_blank" href="https://makerworld.com/en/models/508393" rel="nofollow noopener">Ultralight honeycomb/full hotend cover A1 series</a> <a target="_blank" href="https://makerworld.com/en/models/503843" rel="nofollow noopener">Ultralight honeycomb/full poop deflector A1 series</a> <a target="_blank" href="https://makerworld.com/en/models/497028" rel="nofollow noopener">A1 mini PTFE coupling PC4 M10</a> <a target="_blank" href="https://makerworld.com/en/models/434104" rel="nofollow noopener">Z axis dust cover TPU (P1/X1 series)</a> <a target="_blank" href="https://makerworld.com/en/models/438396" rel="nofollow noopener">Ultrathin handle cover P1/X1 series (0.2 nozzle)</a> <a target="_blank" href="https://makerworld.com/en/models/395248" rel="nofollow noopener">Bambulab silicone sock hotend P1/X1 series</a> <a target="_blank" href="https://makerworld.com/en/models/384903" rel="nofollow noopener">AMS feeder PTFE adapter TPU</a> <a target="_blank" href="https://makerworld.com/en/models/122760" rel="nofollow noopener">PinSpool holder v3 for Honeycomb riser</a> <a target="_blank" href="https://makerworld.com/en/models/62411" rel="nofollow noopener">LED light riser P1/X1</a>

Haushalt

Werkstatt

Hobby

Leuchten

Modelle

P1S Bambu