TOP的遥控玩具

hi_im_sean

Wall mount cat suspension bridge, for use with regular 550lb/4-6mm paracord. &nbsp;You should not need supports for any piece, print as oriented. Print very thick walls, PLA suggested to avoid warp. &nbsp;I highly suggest you screw at least 1 of the 3 landing screws into a stud (using a #6x2&#34; drywall screw), preferably the 2 in line and use a good drywall anchor for the 3rd. 8-9 rungs will span 1 set of 16&#34; studs, and it takes 17-18 rungs to span 2, or roughly 32&#34;. You can adjust the rung spacers height in slicer to fine tune the span distance. Find a pair of studs, mark them and test fit the assembled bridge before you drill any holes in your wall, adjust spacers and rungs as necessary. &nbsp;The drop rods snap into the rungs, refer to pictures for rope path. The bridge as pictured took about 1kg of filament, and 10ft of 4mm paracord.&nbsp;The cat step is designed to mount onto 1 stud and I do not suggest you use them at all with regular drywall anchors, maybe toggles on 5/8&#34; drywall, its your call depending on your chonker.

Cat suspension bridge and steps, wall mount

玩具

ByteSlinger

This is a set of coasters designed like vinyl records. Store all 4 vinyl coasters on a record player coaster stand.&nbsp;I've included a fully painted profile which includes 4 coasters, the coaster stand, and the 4 feet, on 3 separate plates:<ul><li>Coasters plate:<ul><li>Set for PETG (you can switch this to PLA and it'll print fine but I printed these in PETG for better heat resistance with hot mugs)</li></ul></li><li>Coaster record player stand plate:<ul><li>This is set up for printing in PLA. You can print it in PETG but I prefer to print in PLA where possible and it works great for this.</li></ul></li><li>Feet plate:<ul><li>This plate is set up for printing in TPU. These need to be printed in TPU but are optional so if you don't have TPU or don't want to print it, the whole thing will be fine without these.</li></ul></li></ul>AssemblyOnce printed, simply slot the needle arm into place as shown in the photos, and then slot the records onto the center pin.If you did print the TPU feet, they should just slot in place but a single drop of glue will help ensure they stay put.&nbsp;Non AMS PrintingThe record player stand has more detail so you're welcome to experiement with ways of printing that without an AMS using filament changes (or just printing in one colour and then painting), but I've also included a profile (and STL if you want to slice for yourself) for a version of the record coasters that allows you to print them multi-colour by changing the filament for the last two layers (if printing at 0.1mm layer height) which will then only affect the label.

Vinyl coasters with record player stand

咖啡

GlennovitS 3D

UPDATE 13. Dec 2023 - Added 12 more sizes! (same lengths, but with a bigger or smaller lid/opening - size 30 and 50. Size 40 is the original) Enjoy!&nbsp;With this simple little print, you can make your bags a lot easier to use in the kitchen! It’s easy to open, pour and close again. Just print and mount on the bag and you are ready to go! No extra hardware needed - all 3D printed. Ready within an hour - almost no reason not to try this ;-)<h2>Overview</h2>The model comes in 18 sizes for now! It's based on the diameter of the lid/opening and the length of the clip. The diameter comes in 3 sizes:<ul><li>30 mm</li><li>40 mm</li><li>50 mm</li></ul>All lengths of the clips in a particular diameter size, uses the same Cylinder and Lid.The clip comes in 6 lengths (currently from XS to XXL). The total length of the different sizes is approx.:<ul><li>XS: 55, 65, 75 mm (depending on the diameter of the lid/openening)</li><li>S: 90 mm</li><li>M: 120 mm</li><li>L: 150 mm</li><li>XL: 180 mm</li><li>XXL: 210 mm</li></ul>For your information, the sizes used on the images are:<ul><li>Pink: 40 - XS</li><li>Yellow: 40 - XL</li><li>Blue: 30 - XS</li></ul>If you have a request for more sizes or other ideas that would make this clip even better, please leave a comment and I’ll get back to you!<figure class="image image_resized image-style-side" style="width:40.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/450294/2023-12-11_bc82b2a49eaeb.gif"></figure><h2>Assembly</h2><ol><li>Cut a hole in the bag (fx. a hole in the corner just big enough to fit the cylinder)</li><li>Hold the Cylinder in the hole with the thread sticking out.</li><li>Mount the Clip around the bag and Cylinder base</li><li>Screw the Lid on</li></ol><h2>Print instructions</h2>It prints easy and can print with default values. There are some tips though to make it better.<ul><li>Supports: No - the print-in-place hinge prints without supports!</li><li>Walls/perimeters: 3-5 - the more walls, the stronger but more filament is used - so test a see what you find the best.</li><li>Infill: The more infil, the stronger it will be. Mostly needed on the longer Clip versions.</li></ul>&nbsp;Happy printing!&nbsp;<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D#join" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D#join</a>

玩具

咖啡

厨房工具