Pawel

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

Organizer

Deran 3D print

Simple base plate for classic Lego bricks. My son loves it! :)&nbsp;Dimension are 231x231mm, optimized for Bambu Lab plate.&nbsp;Please write me if you need other dimension.

Lego base plate 231x231mm

Lego

Cake3d

Hey there, I've designed this model to store my most common used tools, glue, consumables and parts for my printers. Slots for an isopropyl bottle, Elmer's and Bambu supplied glue at the left side but coincidentally the centre cut out for the top glass knob is the perfect size for Elmer's too. Plenty of slots on the right for scrapers, pliers, tweezers, unclogging pins and snips including a dedicated slot for the Bambu scraper that comes with the Printer. Middle and front has room for spare parts. This model has been very popular on Printables and downloaded over 6000 times so I must've done something right.After some suggestions from some people on the Bambu FB group I've added the ability to install a small LED light and cable management underneath the storage to improve the much needed lighting in the printer but currently it only allows a small light bar approx 190x25mm. I do plan on rearranging and removing some slots to allow for a bigger light bar in near future so if you have suggestions for a popular or common light bar please comment and I'll try make it fit. I'd also consider requests/suggestions for specific tool or part slots.The Model fits the dimensions of the X series perfect but also works great on P Series, it sits over the glass door knob and hugs each side of the AMS so will not move and cannot be knocked off. Cut outs are for the X1C touchscreen and the pointless buttons.It's split into two parts that lock together (no tools screws or glue required) so that this can be printed within the X and P series build dimensions. <figure class="media"><div data-oembed-url="https://youtube.com/shorts/gx0XCUPGt9c?feature=share"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=gx0XCUPGt9c"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/gx0XCUPGt9c" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>I've also more recently designed a similar storage optimised for the P Series but is still a great alternative for the X Series but it has some extra features such as phone/tablet stand, much bigger and modifiable modular slots that you can swap to suit or make specific tool holders. Link to that model is > <a target="_blank" href="https://makerworld.com/en/models/38428#profileId-37257" rel="nofollow noopener">https://makerworld.com/en/models/38428#profileId-37257</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/264669/2023-12-13_687eb38f33a71.jpg"></figure>&nbsp;PRINT SETTINGSI highly recommend you print using my STRONG and NEAT print profile as it's tried and tested. My Settings used are below to make this strong and solid but if you want to save an hour or two you do you, top/bottom layers and walls can be reduced to save time and plastic. you're looking at 10-12 hours print time with exactly 0.5kg filament used. I personally printed both parts separately as it is a long print however both parts can be printed at the same time on one build plate and worked great, my print profile contains build plates with both on and also with them separated one part per plate. I recommend eSun PLA+ silver for a good match for the X series printers and Filament PM PLA+ matte black for the P series. I've included build plates of the model in parts or together just pick which you want.4 walls (.4 nozzle)0.2 layer height6 bottom 6 top layers15% gyroid infillTURN OFF AUX FAN TO AVOID WARPING -brim not used in this profile, use brim if you want but it'll probably make joining the parts together more difficult if the brim isn't removed fully.This is designed NO SUPPORTS REQUIRED, no issues when I printed mine some bridging wasn't pretty but it's all hidden underneath, clean from above and strong. &nbsp;&nbsp;Hope you love the model, all I ask in return is you hit like if you do. I would love for you to share your make on here and leave a review it means a lot to me. &nbsp;&nbsp;&nbsp;User Lakopet has created an adaptor to allow this storage to fit perfectly to the side of the printer, rather than on top.<a target="_blank" href="https://makerworld.com/en/models/15641#profileId-16038" rel="nofollow noopener">https://makerworld.com/en/models/15641#profileId-16038</a>&nbsp;Please also respect the license - this is for personal use only.

Top Tool Storage for Bambu Lab X1C X1 P1S P1P printers with AMS

Printer

Makerspace.Online

For this to work you have to download the casing from my <a target="_blank" href="https://makerworld.com/en/models/148536" rel="nofollow noopener">Business card Embosser (LINK!)</a> Paw pattern Rollers for the Business card embosser! (Only rollers, no casing) For all animal and pet lovers! More rollers will be added in the future! Keep an eye on my page or follow <a target="_blank" href="https://www.instagram.com/makerspace.online/" rel="nofollow noopener">my instagram!</a> Note: This design is licensed under a <a target="_blank" href="https://creativecommons.org/licenses/by-nc-sa/4.0/" rel="nofollow noopener">Creative Commons Attribution-Noncommercial-Share Alike</a> Please do not sell this file or printed product.

PAW pattern - Business Card Embosser Roller

Eliza

TheMiguelBi

<h3>Even an indoor office needs a patch of grass to organize the cables! Always in style!</h3>--------------------------------------This is a stylish way to group all the various power cables together, concentrating them in one place. Phone, Power bank, wireless earphones, electronic cigarette. Everything will find a place on this lawn!&nbsp;Only one cable in, many cables out!&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/410246" rel="nofollow noopener">Tiny Poop Minifigures: https://makerworld.com/en/models/410246</a><a target="_blank" href="https://makerworld.com/en/models/413253" rel="nofollow noopener">Fake VGA: https://makerworld.com/en/models/413253</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-04-04_6e0bba1d6c5ec.jpg"></figure>&nbsp;— — Other versions:<ul><li>BIG: 25.5 x 15.7 x 13 cm</li><li>MEDIUM: 17.1 x 10.6 x 10.3 cm</li><li>SMALL: 13 x 8 x 8 cm</li></ul>— — &nbsp;There are three pieces needed,and assembly is very simple:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-30_60dbcc90422e6.jpg"></figure>&nbsp;--------------------------------------For the <a target="_blank" href="https://makerworld.com/en/models/159176" rel="nofollow noopener">magnetic cable holders</a>, here: <a target="_blank" href="https://makerworld.com/en/models/159176" rel="nofollow noopener">https://makerworld.com/en/models/159176</a>--------------------------------------&nbsp;Two sizes available, also for A1mini:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-27_24059c4c65637.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-27_12e92f818eda6.jpg"></figure>&nbsp;&nbsp;To remove the wall at the end of the print, common scissors can be used (this will involve removing a larger portion of grass). I used the common <a target="_blank" href="https://makerworld.com/en/models/12702" rel="nofollow noopener">BambuLab scraper</a>, placing it on a sturdy surface and paying attention gives a good result. Don&#39;t worry if some tufts are crushed during this operation, then by using the clod of grass everything will become homogeneous over time.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/813735/2024-01-30_42126cb9b6668.jpg"></figure>&nbsp;&nbsp;&nbsp; (\(\ ( =’:’) (..(“)(“)Good work! &nbsp;--------------------------------------

Organizer

Lego

Printer

Eliza

Ciekawe