休閒玩家李休閑

Kamteix

With the anticipation of the Dune sequel, I thought it'd be a fantastic opportunity to craft a unique gift for my friends.This creation is inspired by the House Atreides Ornithopter, as depicted in Denis Villeneuve's recent film adaptation.Available in 256x256 to 120x120 (check details for 120x120) printing plate sizes.&nbsp;Assembly Guide avalaible further down<h3>Features:</h3>The model can be displayed in either flight or landed modes.The parts are designed to fit together with tight fit, eliminating the need for glue. However, given I tunned the fitting with the specific calibration of printer, minor adjustments with a dab of glue might be necessary for others.<ol><li>Foldable Wings: Transition the wings between flight or landed positions. Be mindful that when fully folded, the weight of the wings could tip the model backward.</li><li>Landed configuration: This is the default configuration in the kit so you can display the model without anything else.</li></ol><figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/f045ae31-46f9-46b8-b5c1-46b0dd05fe5a/screenshot-2024-03-05-160105.png#%7B%22uuid%22%3A%22c21f633d-eca5-4e2e-8576-fc394b5ff88c%22%2C%22w%22%3A1118%2C%22h%22%3A733%7D"></figure><ol><li>Flight configuration: For those who favor a flight display, you can swap out the ramp and front landing gear with the upgrade kit provided in the downloadable file. I recommend downloading the Stand I created for displaying the model as if it's flying, which you can find below.</li></ol><figure class="image image_resized" style="width:75%;"><img src="https://media.printables.com/media/prints/783683/rich_content/e5ddc8bc-242a-474a-937a-bc8c30309b75/screenshot-2024-03-05-160129.png#%7B%22uuid%22%3A%22193f17cc-9449-4f4c-892c-06cb6c8f1208%22%2C%22w%22%3A1145%2C%22h%22%3A640%7D"></figure><h3>Download the Stand for this kit <a target="_blank" href="https://makerworld.com/en/models/223117#profileId-241123" rel="nofollow noopener">here</a></h3><figure class="image image_resized" style="width:71.7%;"><a href="https://makerworld.com/en/models/223117#profileId-241123" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-03_e2feda12f81c6.jpg"></a></figure><h3>Recommended Printing Settings:</h3>For optimal assembly, I strongly suggest the following settings, fine-tuned for this kit's precision:<ul><li>First layer height : 0.2 mm</li><li>Layer height : 0.08 mm</li><li>Wall loops : 4</li><li>Infill density : 100%</li></ul><h3>Kit options:</h3>I designed the kit with printing bed size in mind so those with small printing bed won't have to scale it down :<h4>Standard Kit with Full-Length Wings:</h4><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_jzh98rsxd7yk.png"></figure>Ideal for a 256x256 printing plate, this version boasts the ornithopter's impressive wingspan.<blockquote>For X and P series of Bambulap Printer you need for this kit to adjust the printer settings as indicated <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">in the official Bambulab Wiki</a><figure class="image image_resized" style="width:58.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_eac8eea287d96.jpg"></figure></blockquote><h4>Compact Kit with Short Wings:</h4>For those preferring a smaller footprint, this edition offers abbreviated wings, suitable for a 256x256 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_ubbm0hxoi9as.png"></figure><h4>Small bed Kit:</h4>An adjusted option without wings for printers with a 180x180 printing plate.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_faebmzhm7e29.png"></figure><h4>Separate Wing Kits:</h4>Choose either the full-scale or short wings to pair with the Miniature Kit for custom wing dimensions.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_emccbnkolm6l.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_zvvyu8oxfmcw.png"></figure><h4>Individual Components:</h4>Every part is also available separately for those looking to print without the kit aspect or specific replacements.&nbsp;<h4>120x120 printing beds</h4>for 120x120 you will need to print indivudual parts without the kit version, you will need to download specificaly those parts instead of those in the general indivudual parts component. Those parts fit diagonally in your plate<ul><li>120x120_Airframe_main</li><li>120x120_Horizontal_tail</li><li>120x120_wings_left</li><li>120x120_wings_right</li></ul>&nbsp;(yes I got a bit carried away by the fun of designing the kit versions :p)&nbsp;<h3>Assembly Guide:</h3>Follow the instructions below to build yours, or don't and enjoy the 3D puzzle.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_80f0f7ba085cc.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_643d4851aa544.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-03-04_1da6163b84e0e.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_b42cc82d0dad3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/696408/2024-02-28_e9d83f36c793d.jpg"></figure>I hope you find joy in assembling this model. I'd be thrilled to see your completed builds and hear your valuable feedback.

Dune - House Atreides Ornithopter - Kit

载具

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon.</h3>&nbsp;<h3>I am here to introduce you, retractable wand! I think it will be a great addition Ornaments for Christmas and in coming holiday season. Bring some magic and best wishes to you all! Have fun, and happy holiday.</h3>&nbsp;It has a wood looking base, and all the components retracting smoothly from the base. It is very simple to printing and reletively fast. total of 58g of filaments and 2h30m printing time. No support needed.&nbsp;<figure class="image image_resized image-style-align-center" style="width:59.27%;"><img src="https://media.printables.com/media/prints/652871/rich_content/764fe838-ba4c-4c36-8496-b0362f3c071e/image.png#%7B%22uuid%22%3A%2204aceb04-518d-4fb3-ab7a-08e22df52c94%22%2C%22w%22%3A828%2C%22h%22%3A575%7D"></figure>&nbsp;&nbsp;<h3>If you like other wand design:</h3>Dragon wand:<a target="_blank" href="https://makerworld.com/en/models/135043#profileId-146518" rel="nofollow noopener">https://makerworld.com/en/models/135043#profileId-146518</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2024-01-16_dbbeb456e4a18.jpg"></figure>&nbsp;Loong wand:<a target="_blank" href="https://makerworld.com/en/models/143028#profileId-155486" rel="nofollow noopener">https://makerworld.com/en/models/143028#profileId-155486</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2024-01-16_c35147a62934a.jpg"></figure>&nbsp;&nbsp;<h2>Update: Revision v1.7, update later. I need to go to sleep. :)</h2>Improved some detail finish out exterior.Improved interlocking mechanism. This is reversion v1.5 I made many test print - revise -test print - continuous improvement process, there are many hours of work behind the scenes to make this model. If you like it, let me know on the comment setction below. I will design a HOLDER for this later, or you can simple just place like this.<h2> </h2><figure class="image image_resized" style="width:62.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_a42a3edcdddfd.jpg"></figure><h2> Printing suggestions:</h2><figure class="image image-style-align-center"><img src="https://media.printables.com/media/prints/652871/rich_content/5df79618-1f96-4188-bbc2-e37e68fee497/image.png#%7B%22uuid%22%3A%2271c8ca82-4bed-4cbb-be20-b1b564b19a50%22%2C%22w%22%3A390%2C%22h%22%3A182%7D"></figure>When you printing done, you can push down the rod to release it from birm:<img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_f4de91e35a75c.gif"> Make sure you use brim and increase brim to 15mm, at the same time I suggest to change the brim gap to 0. So it will ensure it will print successfully. If you are printing with WOOD filament, make sure you use 0.6mm nozzle and reduce the flow rate to 0.9. Other wise you may will have issue the filament clog within the nozzle, happened to me... Sad story. Also, wood filament may over extruding and cuse parts not fully extend, make sure you calibrate it!!! If the filament you use shinks a lot, parts might slide out. Pay attention. <figure class="image image_resized" style="width:51.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_1e1cc9432daab.jpg"></figure><figure class="image image_resized" style="width:60.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_4521f10cfbbcb.jpg"></figure><h3>Design:</h3>So, my first retractable design is Bamboo sword. It is fun to play.<figure class="image image_resized" style="width:53.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_79b228e570cbb.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:50.43%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_c1ad57f7061ed.jpg"></figure>Showed it to my boss, and she didn't like the noise when I play it. She said it would be cool if I can design something like Wand. I said, okay. Because she is boss so I have agree whatever she said. I started searching how the heck a wand that she like looks like and get some idea of it. At the mean time, I was trying use similar retractable mechanism from Bamboo Sword design. Eventually, I found the wand style that she like, (credit to Arcan Matteo). So I designed the similar organic look. and it looks very rough, my organic design is not that good. So I started working on retractable mechanism, my boss mentioned she want the wand to be short. So there are a lot of parameters need to be change from larger size one.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_a5a9fa271a7bb.png"></figure>Since the fundamental of retractable mechanism is all about interlocking, with smaller object, the interlocking mechanism design is going to be very ticky.Spend a few hour get design done and first prototype done. But having issue pree parts back on. Tired different filaments, silk and those with greater sinkage rate filament works better, but still stuck sometimes.Went back to the CAD changed the parameter dims, tried different locking mechanism, run the test print, and make revision again.Some different interlocking I have try on this model, FYI, if you want to design something similar.<figure class="image image_resized" style="width:45.76%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_164cf76729766.png"></figure>&nbsp;<figure class="image image_resized" style="width:44.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_e49e57d41ec52.png"></figure><figure class="image image_resized" style="width:50.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_2e59b0fef0b35.png"></figure>The most center one have more solid/infill when you printing, is trying to be heavier so when you play it, it will carry more momentum to carry rest of of the parts out. Not much weight increased, but better than none.&nbsp;Some of the fialure one during design, interesting thing during RnD, since this wand have such little size, ther interlock partS will be greatly effect by 0.1mm to 0.2mm parameter differences.(10mm OD good, 10.2mm OD part fly out, or stuck.) So, YOU KNOW HOW I WENT TO THE RABBIT HOLE.<figure class="image image_resized" style="width:64.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_aa1c94c867d94.jpg"></figure>Here are some of the Okay revisions, but some parts will stuck and hard to press back. I have spend over 20 + prints and trying find out the best tolerance, because I don't want to just post a model out, I want something to meet my standard.So, if you get mad of one failure print on your side, looks those failure testing and my hours behind the scene.I think not only my time, but my bambu printer and filaments desired a thanks, lol.<figure class="image image_resized" style="width:64.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-25_e4ab554bc16ab.jpg"></figure>Anyhow.<h2>Have fun!!</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/413419/2023-11-19_821b9e9ceb2d4.gif"></figure>

Harry Potter Wand (Retractable) v1.7

手持玩具

dp makes

A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan flutes have been popular as folk instruments for centuries, with various varieties found in cultures around the world.&nbsp;I think my idea of creating a "Whistle Pan flute" by connecting whistles of different lengths in a line is an interesting and creative one. While it may not be a completely unique idea, it certainly has the potential to produce a unique and fun sound. By carefully selecting and aligning the whistles, it may be possible to achieve a greater range of notes than a traditional pan flute. It would be exciting to see how different materials and shapes of whistles could be used to create even more variations in sound.&nbsp;This model is in progress and I will continue to tune until I have a model that gives a great Whistling Flute sound.&nbsp;•Print settings•&nbsp;Supports: No Resolution: 0.2mm Infill: 15%&nbsp;<h4>Important notice:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.paypal.com/paypalme/DPalacionis" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Whistle Pan flute

乐器

Veracon Engineering

📢 Exciting Addition: Now Featuring a Stylish Lid!🛁 Introducing Veracon Engineering&#39;s 3D Printed Soap Dish with Voronoi Design Inlay and Lid!In our continuous quest to enhance your bathroom experience, we are thrilled to announce the latest upgrade to our soap dish: a sleek and functional lid! Elevate your soap storage solution with added elegance and practicality.🌟 Key Features:• Enhanced Design: Our soap dish now comes complete with a stylish lid, providing a seamless solution for keeping your soap clean and dry between uses.• Versatile Functionality: Enjoy the convenience of a lid that not only preserves the freshness of your soap but also adds a sophisticated touch to your bathroom decor.• Customizable Options: Personalize your soap dish and lid combination with a wide array of color and material choices. Match your bathroom decor effortlessly while expressing your unique style.• Snap Fit Inlay: The snap-fit inlay ensures secure attachment, allowing for easy removal of both the dish and lid for hassle-free cleaning.🛁 Upgrade Your Bathroom Ambiance Today!Experience the perfect blend of style and functionality with Veracon Engineering&#39;s innovative soap dish and lid combination. Elevate your daily grooming routine with precision-engineered solutions designed to exceed your expectations.Transform your bathroom into a sanctuary of elegance and convenience. Choose Veracon Engineering—where every detail is crafted with your utmost satisfaction in mind.&nbsp;For Commercial use please visit my <a target="_blank" href="https://www.patreon.com/user/posts?u=125133059" rel="nofollow noopener">Patreon</a>.&nbsp;If you like the print profiles, please consider rating them. Thanks :-)

Soap Dish with Lid Voronoi Design

实用家居

BODY3D

As you liked my waste eater : <a target="_blank" href="https://makerworld.com/en/models/92332" rel="nofollow noopener">https://makerworld.com/en/models/92332</a>I had the idea of creating another one but this time with Kirby !<figure class="media"><div data-oembed-url="https://www.youtube.com/shorts/vaVUMW5bYIc"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=vaVUMW5bYIc"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/vaVUMW5bYIc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Since he eats everything, I thought it would be perfect :) It will make a very good waste eater for your A1 or A1 Mini or as a candy container or something else ^^ Very simple to print, no supports required. In total 6 colors, Pink, Dark Pink, Red, Blue, White and Black. And only 1 multicolor print for the eyes :) I hope you enjoy !&nbsp;Happy Printing !&nbsp;All my links : <a target="_blank" href="https://beacons.ai/body3d" rel="nofollow noopener">https://beacons.ai/body3d</a>

Kirby Waste Eater

桌面

有两个喷嘴位 五通1个 使用5mm*5mm*1.5mm磁铁磁吸

A1/A1mini 配件盒（bambu lab a1/a1mini accessory box）

打印机

达文西FPV

关节可活动，没有使用支撑，目前只有单色，以后可能会出多色，暂时没有好的多色方案，大家有好的想法可以留言!直接打印只需要2个小时左右，但是为了顶部曲面打印效果更好，我调整了自适应层高，打印时间就会增加到4个小时左右，放大或者缩小后效果会消失，需要重新调整，我试过最小50%打印，关节也可以自由活动！<ul><li>Joints can be moved, without the use of support, only monochrome at present, there may be multi-color in the future, there is no good multi-color scheme for the time being, everyone has a good idea can leave a message!</li><li>Direct printing only takes about 2 hours, but in order to print the top surface better, I adjusted the adaptive layer height, Print time will increase to 4 hours or so, zoom in or out after the effect will disappear, need to re-adjust, I tried a minimum of 50% print, The joints are free to move!</li><li><a target="_blank" href="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395" rel="nofollow noopener">最新3D打印宫崎骏《龙猫巴士》_哔哩哔哩_bilibili</a></li></ul><figure class="media"><oembed url="https://www.bilibili.com/video/BV12M4m1C7Hh/?spm_id_from=333.999.0.0&amp;vd_source=2089e59f0ea7f6d627e58ab3197c5395"></oembed></figure><a target="_blank" href="https://www.douyin.com/user/self?modal_id=7369237370975096118" rel="nofollow noopener">达文西FPV的抖音 - 抖音 (douyin.com)</a>

My Neighbor Totoro Bus龙猫巴士

动物

cuncg

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-13_2a3ab3f4480948.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-01-22_4d9d26956d108.gif"></figure><h3>Tip: Please use the optimized version for printing to get better printing results</h3>The Year of the Dragon has specially designed a cute lucky dragon, symbolizing attracting wealth and treasures. The model production was completed in Cinema 4D, and the output model has very high accuracy, which can print larger sizes. In my printing, it is a small size, and I can also see enough details. It can print single colors or multiple colors. I use K&#39;s orange metal consumables to print the effect very well. There are several explanations as follows:<ol><li>There are two versions of the model uploaded, mainly with two designs: the body with scales and the body without scales.</li><li>There are no special settings for printing parameters, and printing can be done using preset settings. Experts can test for more ideal printing accuracy on their own.</li><li>This version of the design requires the support to be turned on for printing, and the support is also easy to remove. It is recommended to use support consumables to print the support surface, which is easier to remove</li><li>There are no requirements for consumables, and personally, I think Kexcelled&#39;s metal consumables have very ideal effects</li></ol>Update: My design has been commercialized as an electric waver<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-20_bdcc9eab0668f8.gif"></figure><h2>2024.6.20更新：请使用优化版本打印配置进行打印，它具有更少支撑更容易打印的优势</h2>龙年专门设计了一个可爱的招财龙，寓意招财进宝。模型制作在Cinema 4d中完成，输出的模型精度非常高，可以打印更大尺寸，在我的打印中为小尺寸，也能看到足够的细节，可以打印单色也可以打印多色，我使用k家的橙色金属耗材打印效果很理想。有以下几点说明：<ol><li>模型上传有两个版本，主要是身体有鳞片和无鳞片两个设计。</li><li>打印参数没有什么特殊设置，使用预设便可打印，高手可以自己测试更理想的打印精度。</li><li>该版本设计需要开启支撑进行打印，支持也便于拆除，建议使用支撑耗材来打印支撑面，这样更容易拆除</li><li>对耗材没任何要求，个人觉得k家的金属耗材效果非常理想。</li><li>模型已分开零件，可以自己实现多色打印</li></ol>制作过程分享：<figure class="media"><oembed url="https://www.bilibili.com/video/BV1jT4y1b7E9/?vd_source=0d3d7161a6587b2f3e211c44ce51f5ca"></oembed></figure>在接下来的版本将会做一个可电动摇手的设计，同时优化造型，实现无支撑打印。<blockquote>重大更新：</blockquote>电动摇手版招财龙已经成功产品化，效果如下视频展示：<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000151604/design/2024-06-20_bdcc9eab0668f8.gif"></figure><figure class="media"><oembed url="https://www.bilibili.com/video/BV1sE421N75z/?vd_source=0d3d7161a6587b2f3e211c44ce51f5ca"></oembed></figure>&nbsp;&nbsp;&nbsp;